mobiLink – HART + FF + PA
Mobilink Interface for configuring device modules on HART, FOUNDATION FIELDBUS and Profibus PA networks
ATEX Zone Approved
Description
mobiLink Interface
- mobiLink is an Interface that connects to the main “Process Automation” protocols: HART/ FOUNDATION Fieldbus / PROFIBUS PA
- Perfectly suitable as a handheld device, thanks to its battery operation and Bluetooth or USB
- Compatible with FDT Frames applications
- Can be used in hazardous areas (ATEX)
Multi-protocol operation:
- HART Master, Foundation fieldbus Host and PROFIBUS PA Master
- Temporary attachment to fieldbus segments or HART loops, for each interaction with field devices
- Full compliance protocol implementations, allow interference-free access to on-site execution.
mobiLink interface communication via Bluetooth or USB:
- Communication via Battery or Bluetooth and allows its use with a Smartphone or tablet
- USB interface for test bench operation
Support for FDT applications and major engineering tools
- PACTware application and HART communication, DTM included
- DTM communication for Foundation Fieldbus and PROFIBUS PA (Option)
- Foundation Fieldbus configuration tools
- Application program interface for system integration
mobiLink is perfectly suitable for use in hazardous areas (ATEX)
- mobiLink is “EX approved” for Zone 1
- It is suitable for connection to intrinsically safe circuits
| User Interface | Controls Status LEDs |
Power on/off button, Bluetooth pairing button FIELDBUS (Fieldbus mode), HART (HART mode), Bluetooth (Pairing/Bluetooth active), Low battery, Power on |
| Interfaces and Connectors | USB
Bluetooth Fieldbus HART |
Speed: USB 2.0 Full Speed Connector: USB Type C Electrical: Non intrinsically safe. Do not use inside hazardous areas. 5V, 100mA. Um = 253VBT mode: BT Classic, 2.4 – 2.478 GHz Output Power: +8 dBm (maximum)Connection: 4 mm banana type jacks (red/black), polarity has to be observed Physical Layer: according to IEC 61158-2, Type 1: 31.25 Kbit/s, voltage mode Nominal input current (Fieldbus): 10 mA in Bluetooth and regular USB mode 18 mA (with Ufieldbus > 9,5V) for increased battery life time in USB mode (controlled by application) Fieldbus Terminator: No fieldbus terminator includedConnection: 4 mm banana type jacks (red/black) Physical Layer: HART FSK compliant modem |
| Operation in Hazardous Areas | Intrinsic Safety Parameters | EX ia IIB, Ui = 30 V or FISCO field device Isolation: 1500 VDC between USB and Fieldbus, 1500 VDC between USB and HART |
| Physical Properties | Dimensions (L x W x D)
Weight Power Supply Operating Temperature Storage Relative Humidity Protection Class |
175 mm x 74 mm x 32 mm
330 g (incl. Batteries) Battery: 3 * Alkaline, IEC-LR6, nominal voltage 1,5V -20°C .. +50°C Store batteries in a dry place at normal room temperature. < 95% rH non condensing IP 54 (if USB port covered with cap) |
-
Data Sheets
-
Drivers & Software
- mobiLink Manager 64bit
- mobiLink Manager 32bit
- Communication Configuration Tool Windows v 2.24
- mobiLink DTM 64bit_v1.30
- mobiLink DTM 32bit_v1.30_
- PACTware 4.1 SP 4 (Full version, free of charge)
- Firmware mobiLink (Profibus PA) v 1.30
- Firmware mobiLink (HART) v 1.30
- Firmware mobilink (Fieldbus Foundation) v 1.30
-
Manuals & Documentation
===================
Find all our downloads on our mirrors
| Hardware | mobiLink, USB cable, set of fieldbus cables with ‘clips’, 3 Alkaline IEC-LRC6 batteries, USB memory |
| Software | PACTware, HART Communication DTM, USB driver on USB card
Foundation fieldbus Communication DTM (optional) |
| Documentation | On USB memory stick |
| Order Reference | |
|---|---|
| ATV-DBA-KM-020410 | mobiLink, including accessories |
| ATV-LRA-KK-021971 | FF CommDTM License |
| ATV-LRA-KK-020721 | FF Configuration Tool ComConf License |