PROCESS AUTOMATION | ATEVA Technologies https://www.atevatech.net Votre partenaire en réseaux industriels Sat, 21 Mar 2026 17:34:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://www.atevatech.net/wp-content/uploads/2021/03/cropped-cropped-ATV_logo_web-32x32.png PROCESS AUTOMATION | ATEVA Technologies https://www.atevatech.net 32 32 SmartLink HW PN https://www.atevatech.net/produit/smartlink-hw-pn/?utm_source=rss&utm_medium=rss&utm_campaign=smartlink-hw-pn Wed, 10 Sep 2025 10:50:36 +0000 https://www.atevatech.net/?post_type=product&p=40024 smartLink HW-PN provides access to PROFINET networks. By integrating standardized technologies like a FDI communication server (OPC UA), it provides transparent access to all connected devices.

The post SmartLink HW PN first appeared on ATEVA Technologies.]]>

SmartLink HW PN

smartLink HW PN

PROFINET Gateway for Asset Management

Access PROFINET networks via FDI and OPC UA

smartLink HW-PN provides access to PROFINET networks. By integrating standardized technologies like a FDI communication server (OPC UA), it provides transparent access to all connected devices.

smartLink HW-PN can be used for asset management, device configuration and monitoring.

Asset Management and Parameterization of PROFINET Devices

Parameterization and Asset Management
  • Secure, standardized access to devices
  • Parallel to and independent of the controller
Compatible with established communication standards
  • Implements the standard FDI communication server interface based on OPC UA

Asset Management and Parameterization of PROFIBUS Devices

Parameterization and Asset Management
  • Secure, standardized access to devices
  • Parallel to and independent of the controller
Inexpensive and low-risk Integration
  • Connection of PROFIBUS devices without additional hardware
  • Use of existing infrastructure using the PROFINET/PROFIBUS proxy standard for connecting to the PROFIBUS devices
Compatible with established communication standards
  • Implements the standard FDI communication server interface based on OPC UA

Overview

Parameterization and Asset Management

  • Independent of PROFINET engineering tools
  • Centralized and time-saving asset management of PROFINET networks with PROFINET and PROFIBUS field devices directly from the control room

Ethernet Access Point to PROFINET networks

  • Provides 2nd channel to access the field devices
  • Acts as a PROFINET supervisor
  • Is part of one PROFINET network
  • Integrated 2-port switch for use in line or ring network topologies

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFINET networks without requiring modification
  • Access to acyclic data via FDI communication server (OPC UA)

Technical Data

smartLink HW-PN
Hardware Processor Altera Cyclone V SoC with dual-core ARM Cortex-A9
Status LEDs (Gateway) PWR, RUN, ERR, BUS
Real-Time Clock Real-Time clock with buffering, setting the time via browser or by NTP server
(buffer time depends on conditions such as ambient temperature and duration of use)
Interfaces Ethernet 1 x IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T, Connector: RJ45
PROFINET 2 x IEEE802.3 10BASE-T/100BASE-TX, Connector: RJ45; Embedded PROFINET 2-port switch for line or ring topology
Protocol: PROFINET RT / IRT, Support of PROFINET redundancy protocols
Supported Communication Protocols PROFINET, PROFIBUS
PROFINET/PROFIBUS Proxies Softing:
pnGate DP, pnGate PA
aplSwitch Field PA
Physical Properties Dimensions (H x W x D) 120 mm x 28 mm x 110 mm
Weight Approx. 430g
Power Supply 18 VDC … 32 VDC; SELV/PELV power supply mandatory
Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
Typical Power Loss 5 W
Operating Temperature -40 °C … +65 °C (see detailed mounting description in user manual)
Storage Temperature -40 °C … +85 °C
Relative Humidity 10 % … 95 %, non-condensing
Cooling Convection, no fan
Mounting DIN rail 35 mm
Protection Class IP20
Conformity / Standards CE Electromagnetic compatibility (EMC) and Restriction of Hazardous Substances (RoHS)
EN 61000-6-2 Generic standards – Immunity standard for industrial environments
EN 61000-6-4 Generic standards – Emission standard for industrial environments
EN 55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements Class A
EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics –
Limits and methods of measurement Class A
EN 50581:2012/EN IEC 63000:2018 RoHS, Assessment to the restriction of hazardous substances
FCC FCC 47 CFR Part 15B Section 15.109 (Class A)
VCCI VCCI Voluntary Control Council for Interferences by Information Technology Equipment, April 2015

References

Scope of Delivery
Hardware smartLink HW-PN
Documentation User Guide as PDF download

 

Order Numbers
GEA-YA-026010 smartLink HW-PN
LRA-AA-027003 smartPlus PN, License access to one field device
The post SmartLink HW PN first appeared on ATEVA Technologies.]]> SPI 3 – Serial Device to Profibus https://www.atevatech.net/produit/spi3-serial-device-to-profibus/?utm_source=rss&utm_medium=rss&utm_campaign=spi3-serial-device-to-profibus Mon, 28 Oct 2024 09:44:09 +0000 https://www.atevatech.net/?post_type=product&p=37919 SPI 3 - Serial PROFIBUS Interface The post SPI 3 – Serial Device to Profibus first appeared on ATEVA Technologies.]]>

SPI 3 – Serial PROFIBUS Interface

SPI3-RS232

SPI 3 – Serial PROFIBUS Interface

Connecting Serial Devices to PROFIBUS Networks

By using the SPI 3, devices with serial interface are integrated in PROFIBUS as DP slaves. Depending on the application, various protocols and physical interfaces are available. In decentralized PROFIBUS installations, the SPI 3 replaces the serial interface inside the PLC. The SPI 3 is configured via the respective PROFIBUS DP master by means of the SPI 3 GSE file. The PROFIBUS IO range can be flexibly configured. The SPI 3 is suitable for simple applications, such as connecting text displays or barcode scanners, as well as for more complex applications such as the integration of identification systems, scales, controllers and laboratory equipment.

Overview

  • Integration of devices with serial interface as DP slave devices in PROFIBUS networks
  • Available for various protocols and physical Interfaces

Functions

  • DP slave with transmission rate of 9.6 kbit/s up to 12 Mbit/s
  • Serial transmission rate of 110 bit/s up to 57.6 kbit/s (depending on the protocol)
  • Serial interface available as RS 232, RS 422 or RS 485
  • Configuration with GSD file via the PROFIBUS DP master

Downloads

Documents

Datasheet: SPI 3

Serial Device to Profibus converter specifications.

Download

SPI 3 — Cloud Access

Access to software, documentation and GSD files via our secure cloud.

Drivers & Software

Doku Media Kits (ASCII, MODBUS, Sartocheck), GSD files.

Request Download

Documentation

Installation guide, release notes.

Request Download

Other

Additional resources.

Request Download

References

Order Information

Scope of Delivery
Hardware SPI 3
Documentation On Website
Order Numbers
GPA-NS-011236 SPI 3 RS 232
GPA-NS-011237 SPI 3 RS 422
GPA-NS-011238 SPI 3 RS 485
The post SPI 3 – Serial Device to Profibus first appeared on ATEVA Technologies.]]> NETLink Pro Compact https://www.atevatech.net/produit/netlink-pro-compact/?utm_source=rss&utm_medium=rss&utm_campaign=netlink-pro-compact Fri, 28 Jun 2024 08:06:37 +0000 https://www.atevatech.net/?post_type=product&p=37265 NEtlink Pro Compact USB Hardware interace gateway : MPI / Ethernet (RFC1006 )

 

The post NETLink Pro Compact first appeared on ATEVA Technologies.]]>

NETLink® PRO Compact

NEtlink Pro

Netlink Pro compact

The devices of the NETLink family serve the purpose of programming, configuring, and visualizing S7 PLCs.

  • RFC 1006 (ISO on TCP)
  • CPU-to-CPU communication (with S7-300* and S7-400*)
  • Support for all common S7 engineering tools
  • Dynamic address assignment using DHCP
  • Security functions for securing TCP/IP access
  • Switchable PLC write protection
  • Up to 16 TCP connections
  • Up to 32 MPI/PROFIBUS connections
  • Easy configuration via web interface
  • Variables can be monitored in a browser window
  • Support for slave configuration
  • Electrical isolation for MPI/PPI/PROFIBUS
  • MPI/PPI/PROFIBUS from 9.6 kbps to 12 Mbps
  • For S7-200*, S7-300*, S7-400*
  • Power can be supplied by the CPU or, alternatively, by an external DC 24 V supply

Overview

NETLink® PRO Compact

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices.
The integrated web interface offers parameterization, diagnostic, and security features, and for functional enhancements, the user can use our free diagnostic software SHTools to, for example, automatically perform firmware updates. The latest version is available for download.

The NETLink PRO Compact is a communications processor in the plug format for programming, visualization, and remote maintenance. It combines flexibility and a compact design. Power is supplied to the NETL ink® either through the CPU of the automation device or externally with DC 24 V as an option. The network connection can be used with any standard Cat-5 cable, making cable lengths up to 100 meters feasible without additional components.

Technical Data

NETLink® PRO Compact

General information

  • Order number700-884-MPI21
  • Article nameNETLink PRO Compact
  • Dimensions (DxWxH)40 x 17 x 64 mm
  • WeightApprox. 110 g
  • Supported operating systemsNo limitation (driver for SIMATIC NETLink-S7-NET only Windows XP/2003R2/7/2008R2/8.1/2012 R2/10)

Communication interface

  • Number1
  • Type10 Base-T/100 Base-TX
  • Auto MDI/MDIX
  • ProtocolFDL,RFC 1006
  • ConnectionRJ45
  • Transmission rate10/100 Mbps autom. detection

MPI/PPI/PROFIBUS interface

  • Number1
  • TypeRS485, isolated
  • ConnectionSUB-D male connector, 9-pin. with PG interface and repeater
  • Transmission ratemax. 12 Mbps autom. detection

Status indicator

  • LED5 LEDs, 2 of them bi-color

Power supply

  • Voltage supply24 V DC, 18–30 V DC
  • Current drawmax. 200 mA at DC 24 V

Ambient conditions

  • Ambient temperature0 °C … +60°C
  • Transport and storage temperature-20 °C … +80 °C
  • Relative air humidity95 % r H without condensation
  • Pollution degree2
  • Protection ratingIP20
  • ApprovalsCE

Downloads

NETLink Pro Compact — Cloud Access

Access to all downloads from our secure cloud.

Drivers & Software

Software and drivers.

Request Download

Documentation

User manual and technical documentation.

Request Download

Other

Additional resources.

Request Download

Why Choose the NETLink PRO Compact for Your S7 PLC Network?

The HELMHOLZ NETLink PRO Compact (700-884-MPI21) is the ideal MPI/PROFIBUS to Ethernet gateway for industrial automation engineers who need reliable remote access to Siemens S7 PLCs. Whether you are programming an S7-200, configuring an S7-300, or visualizing an S7-400, this compact communications processor provides seamless connectivity through the industry-standard RFC1006 protocol.

With support for up to 16 simultaneous TCP connections and 32 MPI/PROFIBUS connections, the NETLink PRO Compact is engineered for demanding industrial environments. Its electrical isolation protects your equipment, while the integrated web interface simplifies configuration and diagnostics. The device supports transmission rates from 9.6 kbps up to 12 Mbps with automatic detection, ensuring optimal performance across all bus speeds.

Frequently Asked Questions

What PLCs are compatible with the NETLink PRO Compact?

The NETLink PRO Compact is compatible with Siemens S7-200, S7-300, and S7-400 programmable logic controllers via MPI, PPI, and PROFIBUS interfaces.

What protocol does the NETLink PRO Compact use?

It uses RFC 1006 (ISO on TCP) for Ethernet communication and supports FDL protocol for fieldbus communication, enabling CPU-to-CPU data exchange.

Can I power the NETLink PRO Compact from the PLC?

Yes, the device can be powered directly from the CPU of your automation device or externally with a 24V DC power supply (18-30V DC range).

The post NETLink Pro Compact first appeared on ATEVA Technologies.]]> PB-LSZ-CHB3 https://www.atevatech.net/produit/pb-lsz-chb3-2/?utm_source=rss&utm_medium=rss&utm_campaign=pb-lsz-chb3-2 Thu, 20 Jun 2024 16:49:43 +0000 https://www.atevatech.net/?post_type=product&p=37181

Leakage current clamp for measuring leakage current : PB-LSZ-CHB3

 

  • The PB-LSZ-CHB3 clamp allows the measurement of leakage currents; eg: leak, Measures leakage currents, e.g. leakage and fault currents, and current pick-up of instruments without breaking the circuit.
  • Measurements according to DIN VDE 0701/0702 and the German BetrSichV (BGV A3, VBG 4).
  • With formidable reliability, this clamp detects very possible leakage currents, resulting from ElectroMagnetic field (EMC) problems.
  • PB-LSZ-CHB3 Features: Measuring leakage currents Measurement of differential currents Resistance and voltage measurement Measuring frequency for AC current / Voltage: 40 Hz…1 kHz
  • Acoustic continuity test MIN/MAX and relative measurement Manual selection of the measuring range integrated data hold Additional bar graph display
  • Clamp opening: opening up to: 30 mm Automatic expansion Digital clamp for measuring leakage currents: 2 1.5 V IEC LR6 batteries,
  • protective cover,
  • measuring cables (1 x red, 1 x black) and user manual.

 

Ref: ATV-DDA-ZZ-004010 (formerly: PB-LSZ-CHB3)

pb-lsz-chb3
The post PB-LSZ-CHB3 first appeared on ATEVA Technologies.]]> Smartlink HW-DP https://www.atevatech.net/produit/smartlink-hw-dp/?utm_source=rss&utm_medium=rss&utm_campaign=smartlink-hw-dp Fri, 31 May 2024 19:24:08 +0000 https://www.atevatech.net/?post_type=product&p=37025 Asset Management and Parameterization of HART devices

Asset Management and Parameterization of PROFIBUS Devices

Direct Access to Process data from your PROFIBUS Network

The post Smartlink HW-DP first appeared on ATEVA Technologies.]]>

SmartLink DP for asset Management Access Point on PROFIBUS DP networks

smartlink DP

Connection of PROFIBUS and HART devices to HART IP, OPC UA, MQTT and FDT

smartLink HW-DP provides PLC independent access to PROFIBUS DP Networks. It enables Plant Asset Management for field devices using standard industry tools and allows using HART IP as a standardized format. smartLink HW-DP is a compact tool that can be integrated without interfering with the operation of existing installations. Thus, it enables Industry 4.0 connectivity for new and existing PROFIBUS DP networks.

smartLink DP

Overview

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Independent of configuration tools
  • Centralized and time-saving parameterization of PROFIBUS and HART field devices directly from the control room
  • Access from Plant Asset Management applications for field devices configuration based on FDT / DTM and EDDL standards (acyclic master)

Ethernet Access Point to PROFIBUS DP

  • Provides 2nd channel to access the field devices
  • Acts as PROFIBUS DP master class 2
  • Support of one PROFIBUS DP segment

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFIBUS segments without requiring modification
  • Access to cyclic and acyclic data via HART-IP and OPC UA

Technical Data

Asset Management and Parameterization of HART Devices

Configuration, Parameterization, Plant Asset Management

  • Secure, standardized access to devices
  • Parallel to and independent of the controller

Inexpensive and low-risk integration

  • Connection of a large number of HART devices without rewiring the devices
  • Use of existing infrastructure using „HART over PROFIBUS“
  • Large number of supported Remote IOs

Compatible with established standard applications

  • Uses HART-IP as standard application protocol
  • Proven and tested with Emerson AMS Device Manager, ABB FIM, E+H FieldCare and PACTware

Asset Management and Parameterization of PROFIBUS Devices

Configuration, Parameterization, Plant Asset Management

  • Secure, standardized access to devices
  • Parallel to and independent of the controller

Compatible with established standard applications

  • Drivers available for FDT
  • Proven and tested with E+H FieldCare and PACTware

Direct Access to Process Data from PROFIBUS Networks

Capturing process data directly from the network

  • Live provision of all process data for further use in typical Industry 4.0 applications such as data analytics
  • Collecting data directly from the network, replacing the need to access the controller
  • No intervention in the running process

Secure provision of data using OPC UA

  • State-of-the-art transmission method in industrial networks
  • Fast update cycles over OPC UA possible

Asset Monitoring and Diagnostics in PROFIBUS Networks

Complete inventory of the entire network

  • I&M data from all connected devices
  • Automated live queries without configuration

Secure provision of data using MQTT

  • State-of-the-art transmission method for cloud connectivity
  • Information model based on OPC UA Companion Specifications for PROFINET

Health monitoring of all connected devices

  • Diagnostic messages and status of all bus stations
  • Statistics parameters for the entire network

Integrated with Softing plantPerfect Monitor application

  • Use the plantPerfect Monitor application to monitor the network with all its devices

 

 

Downloads

Documents

Datasheet: SmartLink HW-DP

Technical specifications and features.

Download

SmartLink HW-DP — Cloud Access

Access to software, documentation and drivers via our secure cloud.

Drivers & Software

Software, firmware and configuration tools.

Request Download

Documentation

User manual, quick start guide and technical documentation.

Request Download

Other

Additional resources and documentation.

Request Download

References

Scope of Delivery
Hardware smartLink HW-DP
Documentation On Website

 

Order Numbers
GEA-YN-026000 smartLink HW-DP
GEA-YN-026001 smartLink HW-DP 50, Hardware preloaded with licenses for 50 devices
GEA-YN-026002 smartLink HW-DP 100, Hardware preloaded with licenses for 100 devices
GEA-YN-026003 smartLink HW-DP 250, Hardware preloaded with licenses for 250 devices
GEA-YN-026004 smartLink HW-DP 375, Hardware preloaded with licenses for 375 devices
LRA-NN-027004 smartPlus DP, License access to one field device

 

Additional Products and Services
DBA-KM-020410 mobiLink – Mobile HART interface
LRL-TG-020000 plantPerfect Monitor, perpetual licence including 1 year software updates for 1 device
LMA-TG-020000 plantPerfect Monitor, 1 year software updates for 1 device
LAA-TG-020000 plantPerfect Monitor, 1 year rental licence for 1 device

Misc

smartLink HW-DP
Hardware Processor Intel Cyclone V SoC with dual-core ARM Cortex-A9
Status LEDs (Gateway) PWR, RUN, ERR, BUS
Real-Time Clock Real-Time clock with buffering, setting the time via browser or by NTP server (buffer time depends on conditions such as ambient temperature and duration of use)
Interfaces Ethernet 1 x IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T, Connector: RJ45
PROFIBUS DP 1 x Segment with RS485 Physical Layer, Connector: 9-pin Sub-D socket
Supported Communication Protocols HART-IP, MQTT, OPC UA, PROFIBUS DP
PROFIBUS Remote IOs Siemens:
ET 200SP: 155-6BU01-0CN0
ET 200iSP: 152-1AA00-0AB0
ET 200M: 153-2BA10-0XB0
ABB:
S800: CI801, CI840, CI840A
S900: CI920N, CI920S
Pepperl+Fuchs:
LB: LB8105, LB8106, LB8109
FB: FB8206, FB8209
R.Stahl: iS1+: CPM 9440/15-01-11
Turck:
BL20: BL20-E-GW-DP, BL20-GW-DPV1
excom: GDP 1,5
WAGO: I/O System 750: 750-333, 750-833
HART IO Modules Siemens:
ET 200SP: 134-6TD00-0CA1, 135-6TD00-0CA1
ET 200iSP: 134-7TD00-0AB0, 135-7TD00-0AB0, 134-7TD50-0AB0, 138-7FA00-0AB0
ET 200M: 332-8TF01-0AB0, 331-7TF00-0AB0, 331-7TF01-0AB0, 331-7TB00-0AB0, 332-8TF00-0AB0
ABB:
S800: AI815, AO815, AI845, AO845A, AI895, AO895
S900: AI930N, AO930N
Pepperl+Fuchs:
LB: LB3002, LB3102, LB3103, LB3105, LB4002, LB4005, LB4102, LB4105, LB3005A2, LB3006A, LB3106A, LB4106A, LB7104A
FB: FB3202B1, FB3202B2, FB3205B2, FB3205B3, FB3302B2, FB3305B2, FB4202B2, FB4202B3, FB4205B2, FB4205B3, FB4205C2, FB4302B2, FB7204B3, FB7304B3
R.Stahl: iS1+: AIM 9461/12-08-11, AOM 9466/12-08-11, AUM 9468/32-08-11
Turck:
BL20: BL20-2AIH-I, BL20-2AOH-I
excom: AIH40Ex, AOH40Ex
WAGO: I/O System 750: 750-484, 75x-842
HART-IP Applications Emerson AMS Device Manager V14.1.1, V14.5
Endress + Hauser Netilion (FieldEdge SGC500)
ABB FIM V3.01
FDT Applications PACTware, Endress + Hauser FieldCare
Physical Properties Dimensions (H x W x D) 120 mm x 28 mm x 110 mm
Weight Approx. 430g
Power Supply 18 VDC … 32 VDC; SELV/PELV power supply mandatory
Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
Typical Power Loss 5 W
Operating Temperature -40 °C … +65 °C (see detailed mounting description in user manual)
Storage Temperature -40 °C … +85 °C
Relative Humidity 10 % … 95 %, non-condensing
Cooling Convection, no fan
Mounting DIN rail 35 mm
Protection Class IP20
Conformity / Standards CE Electromagnetic compatibility (EMC) and Restriction of Hazardous Substances (RoHS)
EN 61000-6-2 Generic standards – Immunity standard for industrial environments
EN 61000-6-4 Generic standards – Emission standard for industrial environments
EN 55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements Class A
EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics –
Limits and methods of measurement Class A
EN IEC 63000:2018 RoHS, Assessment to the restriction of hazardous substances
FCC FCC 47 CFR Part 15B Section 15.109 (Class A)
VCCI VCCI Voluntary Control Council for Interferences by Information Technology Equipment, April 2015
The post Smartlink HW-DP first appeared on ATEVA Technologies.]]> edgeConnector 840D https://www.atevatech.net/produit/edgeconnector-840d/?utm_source=rss&utm_medium=rss&utm_campaign=edgeconnector-840d Tue, 28 May 2024 17:23:22 +0000 https://www.atevatech.net/?post_type=product&p=37003

Edgeconnector 840D Software module for connecting SINUMERIK 840D controllers to industrial IoT applications

edgeConnnector

Container technology with access to SINUMERIK 840D Solution Line and Power Line data via OPC UA and MQTT with flexible deployment options for higher-level applications

edgeConnector 840D connects to the Siemens SINUMERIK 840D Solution Line and Power Line controllers without any intervention in the machine configuration and provides the data as an OPC UA server. In addition, the data can also be transmitted to MQTT brokers using MQTT. All process parameters from the NC part (axis, tool, program data), as well as the PLC part (status, program sections, alarms) and the drive data can be read out. As a Docker container, the product offers flexible deployment options, e.g. on standard IPCs or devices running Azure IoT Edge or AWS IoT Greengrass.

The application can be easily configured locally via an integrated web interface. It can also be managed remotely using the REST API. The configuration is flexible and includes precisely coordinated security settings (e.g. role-based access rights for OPC UA client applications).

The new product, which is also based on virtualization and container technology, benefits from Softing’s deep experience with brownfield connectivity through MQTT and OPC UA technology and provides the data for new and highly efficient IoT solution architectures.

Edgeconnector 840D

Overview

Accessing Tooling Machine Data from OPC UA Applications

  • Provision of SINUMERIK 840D Solution Line and Power Line data
  • Pre-defined namespace, customizable for special machine data sets
  • Automatic tool recognition and listing of all available magazines and tools
  • Standardized OPC UA communication for data integration into management systems like ERP, MES, or SCADA or for data exchange with other docker containers like Microsoft OPC Publisher or Amazon AWS IoT SiteWise
  • Connection of up to 20 SINUMERIK 840D controllers with one Container Runtime
  • Reading of NC/PLC alarms, as well as GUD variables and R parameters
  • Dedicated for retrofit upgrades of existing SINUMERIK controllers

Easy Cloud-driven or Local Deployment

  • Container images stored in different online repositories like Docker Hub, Azure Container Registry (ACR) or Amazon Elastic Con-tainer Registry (ECR)
  • Simple data transmission to an MQTT broker using the MQTT publisher functionality for local or cloud-based solutions
  • Recipe manager functionality for writing process data from the cloud to controllers (MQTT Subscriber)
  • Licensing via Softing Floating License Server

Lightweight Flexible Container Solution

  • Less resources plus increased scalability and flexibility
  • Support of security standards as SSL/TLS, X.509 certificates, authentication, and data encryption
  • Highly flexible state-of-the-art application to be deployed, adjusted, or started and stopped immediately, if needed
  • Deployment and configuration also via management systems such as Kubernetes, Azure IoT Edge or AWS IoT Greengrass

Technical Data

edgeConnector 840D
Supported Controllers Siemens SINUMERIK 840D Solution Line, software version V2.7 and higher
Siemens SINUMERIK 840D Power Line, software version V5.3 and higher
Supported Protocols
  • OPC UA, MQTT
  • SIMATIC S7 (RFC1006), SINUMERIK (RFC1006
Supported MQTT Specifications V3.1, V3.1.1 & V5
Supported MQTT Features
  • MQTT Publisher & Subscriber
  • TCP, TLS/SSL, WS, WSS, (including certificates)
  • QoS, Retain, Last Will & Testament
  • Store & Forward
Supported OPC Specifications OPC Unified Architecture V1.04
OPC UA Roles OPC UA Server
OPC UA Profiles Data Access
OPC UA Security Security methods Aes256Sha256-RsaPss
Aes128SHA256-RsaOaep
Basic256Sha256
Basic256
Basic128Rsa15
None
Authentication Anonymous
Username and password
Certificate
OPC Compliance Test based on compliance test tools of OPC Foundation
Configuration Interface Authentication
  • Username / Password
  • LDAP/LDAPS
Logging, Diagnostics
  • Built-in trace and audit logging facilities, configurable and accessible through the web interface Docker integrated trace logging
  • Prometheus Metrics Information
Supported Operating Systems Linux (Docker Engine), Windows 10 and Windows 11 (Docker Desktop), Windows Server 2019 and Windows Server 2022 (Docker Enterprise Edition)
Supported Architectures AMD64, ARM64, ARM32
Supported Container Orchestration Systems Kubernetes (K8s), Amazon ECS
Minimum Hardware Requirements 320 MB free disk space, 2 GB RAM
Licensing Licensed via Softing Floating License Server
Demo Version 20 PLC connections timed at 72 hours
REST-API Access using the edgeConfigurator, download via Docker Hub

Downloads

edgeConnector 840D — Cloud Access

Access to all downloads from our cloud: License Manager, symbol files, Docker images and documentation.

Drivers & Software

Softing License Manager, edgeConnector 840D (DockerHub / Azure Marketplace).

Request Download

Documentation

Preconfigured symbol files for SINUMERIK 840D, dataFEED Exporter.

Request Download

Other

Checksums and additional resources.

Request Download

References

Scope of Delivery
Software dataFEED edgeConnector 840D, download via Docker Hub or Azure Marketplace
License Key E-mail delivery
Documentation Online help (German / English) and online: www.github.com/SoftingIndustrial/datafeed-edge-connector
Order Numbers
LRL-XX-161001 edgeConnection – Perpetual License*
LMA-XX-161001 edgeConnection – Software Upgrade License
* edgeConnection License already include 1 Year Software Upgrade license (LMA-XX-161001)
Additional Products and Services
edgeAggregator
GPA-CS-041000 NETLink S7-Compact (for S7-300/S7-400 without CP or Ethernet connection)
6FC5851-1XC45-4YA8 SINUMERIK 840D sl CNC software and SINUMERIK Operate, toolbox including NCVar Selector
(please order directly from Siemens)

Wiki

Softing dataFEED edgeConnector 840D is a containerized SINUMERIK 840D SolutionLine and PowerLine connectivity module adding OPC UA Server and MQTT Publisher functionality. The software can run as IoT Edge Module. After the deployment, it is possible to configure Southbound and Northbound communication via local GUI or REST interface.

For southbound communication it is possible to connect up to 20 SINUMERIK 840D SolutionLine and PowerLine controllers. The Namespace configuration is pre-configured and can be extended via STEP7/TIA Portal or .awl files.

The northbound communication runs with standardized OPC UA communication for data integration into management systems like ERP, MES or SCADA or for data exchange with other docker containers like Microsoft OPC Publisher for cloud scenarios. In addition MQTT is available as protocol to connect MQTT Broker in local or cloud environments.

The application supports security standards like SSL/TLS, X.509 certificates, authentication and data encryption. The container runs for 72h in demo mode. Fully activate the application via BYOL from Softing. This also requires the installation of the Softing floating license server available for Windows/Linux.

After the Docker image has been pulled, a Docker container can be started. The webserver and OPC UA Server of the module have to be exposed on the host machine if dataFEED edgeConnector 840D shall be accessed from outside the dockerized environment.

To start dataFEED edgeConnector 840D with the default ports mapped 1:1 to the host machine:

docker container run -p 443:443 -p 4897:4897 softingindustrial/edgeconnector-840d

Softing licenseServer

Softing licenseServer is used to host network software licenses (also called floating licenses or shared licenses) that are installed locally on an individual users’ machine. The network licenses can be shared among many users and/or applications.

Softing licenseServer fulfills requests to run a network application if the required license is available. When the network license is released (for example, a user closes the application), the license is moved to the license server’s available license pool and is made available for other checkout requests.

The license server is used by several Softing products like the edgeConnector or plantPerfect product families.

Please read the user guide of the licenseServer for install and usage instructions. It is available as download on the Softing product pages using the licenseServer.

Installation

Download the docker image using the following command:

docker pull softingindustrial/license-server

Use the following commands to create and configure Docker container:

mkdir -p /var/lib/license-server
mkdir -p /var/lib/license-server/licenses
mkdir -p /var/lib/license-server/config
mkdir -p /var/lib/license-server/users
docker create --name license-server -p 8000:8000 -p 6200:6200 -v /var/lib/licenseserver/licenses:/root/.x-formation -v /var/lib/license-server/users:/root/sflm/users -v /var/lib/license-server/config:/root/sflm/config --restart=always softingindustrial/license-server
docker start license-server

The following ports are used by the license server:

Port Service
6200 Network License Server
8000 HTTPS Web Server

These ports are mapped in the docker create call above 1:1 to the ports of the host system. Of course, you can map them to different ports on the host system by changing the first number on the -p option (example: -p 8400:8000).

To disable HTTPS, use the docker create command without a port mapping for port 8000.

Note: You will need access to the Web server to add licenses.

These following volumes are used by the license server:

Volume Description
/root/.x-formation Folder to store the license files
/root/sflm/users Folder to store the user data
/root/sflm/config Folder to store the configuration of the license server

The directory /var/lib/license-server is used to persist the configuration of the license server container. Of course, you can store it in a different folder on the host system by changing the first folder on the -v option (example: -v /home/xxx/ls:/root/.x-formation).

The option –restart=always will start the container on the startup of the system or restart it on failure.

Start the container with the following command:

docker start license-server

Stop the container with the following command:

docker stop license-server

Remove the container with the following command:

docker rm -f license-server

====================================

You might also be interested in ….

The post edgeConnector 840D first appeared on ATEVA Technologies.]]> FG-200 Gateway https://www.atevatech.net/produit/fg-200/?utm_source=rss&utm_medium=rss&utm_campaign=fg-200 Fri, 01 Mar 2024 09:59:58 +0000 https://www.atevatech.net/?post_type=product&p=36552 FG-200 : Fieldbus foundtation / Modbus Gateway

The post FG-200 Gateway first appeared on ATEVA Technologies.]]>

Fieldbus Foundation Gateway : FG-200

FG-200

Fieldbus Foundation Gateway :

FG-200The FG-200 HSE ( High Speed Ethernet ) /FF (  Foundation fieldbus )  Modbus Gateway : for the integration of control system on Modbus TCP

Overview

Quick and easy commissioning of the Softing gateway: FG-200FF

  • Optional support for the STHAL Carrier 9419 Bus and Fieldbus 9412 Power Supply (wiring reduced to a minimum)
  • Import Modbus data to a web server reducing mapping efforts

Optimized Management: Softing: FG-200FF

  • “Visitor” mode to avoid any interference with the network
  • Possibility of system management using different software (e.g. Emerson’s AMS) and Field Device Tool (FDT) frame applications (e.g. SMART VISION, FieldMate, Field Device Manager, FieldCare, or PACTware)
  • Redundancy capacity for Softing Gateway: FG-200FF
  • Possible redundancy link (D-3 according to FF-593)
  • Automatic mirroring with data configuration
  • Very fast redundancy

All necessary tools included

  • “FF Configuration Tool” for configuring devices and cyclical communication
  • PACTware for device configuration and basic management.

Downloads

Documents

Datasheet: FG-200 HSE/FF Modbus Gateway

Technical specifications and features of the FG-200 HSE/FF Modbus Gateway.

Download

ATEX Certificate of Conformity

Hazardous location certification documentation.

Download

Achilles Test Report

FG-200 HSE/FF cybersecurity robustness test report.

Download

FG-200 Gateway — Cloud Access

Access to software, firmware, drivers and documentation via our secure cloud.

Drivers & Software

FF HSE DTMs V1.50, Firmware FG-200FF, Search & Configure utility and additional drivers.

Request Download

Documentation

Communication Configuration Tool V2.24, user manual and technical documentation.

Request Download

Other

Whitepaper on Foundation Fieldbus gateway integration and additional resources.

Request Download

References

Description

Hardware FG-200 HSE/FF Modbus
Logiciel Outil de configuration FF, FDT CommDTM, PACTware sur CD-ROM
Documentation Quick Startup Guide, User Manual sur CD-ROM

Références

GCL-EK-024100 FG-200 HSE/FF Modbus  (Foundation fieldbus / Modbus TCP )
GCL-EK-024101 FG-200 HSE/FF Modbus, functionalité, conception identique pour une utilisation avec R. STAHL bus-Carrier Series 9419 et Alimentation Fieldbus série 9412

Misc

Modbus HSE <> Fieldbus Foundation Gateway, 4 segments FF

HS Code 85176200

Video

All our videos on the FG-200 available on our cloud

ATEVA Videos

The post FG-200 Gateway first appeared on ATEVA Technologies.]]> PB-PRO1-PCI https://www.atevatech.net/produit/pb-pro1-pci/?utm_source=rss&utm_medium=rss&utm_campaign=pb-pro1-pci Mon, 23 Oct 2023 13:54:13 +0000 https://www.atevatech.net/?post_type=product&p=36165

PB-PRO1-PCI : Profibus card, PCI format

PB-PRO1-PCI : Profibus Card

Single and dual channel interface boards in universal PCI format for integrating PCs into PROFIBUS architectures as machine controllers, supervisory control applications, field devices or operator panels.

Overview

Always the Fitting PROFIBUS Protocol

  • PROFIBUS Master and Slave functionality
  • Support of PROFIBUS DP, PROFIBUS FMS and PROFIBUS FDL protocols
  • Universal interface solution for integration in industrial and embedded PCs

Rapid Integration

  • Direct access to all protocols via PROFIBUS API
  • Sample programs including comments
  • Integration in various plant asset management tools

Large Choice of Drivers

  • Use in Windows and Linux operating systems
  • PROFIBUS CommDTM for FDT applications included in scope of delivery

Downloads

Documents

Datasheet: PB-PRO1-PCI

Technical specifications and features.

Download

References

Scope of Delivery
Hardware PC interface board
Software Download (see below): Drivers, sample programs
Documentation Download (see below)

Misc

PB-PRO1-PCI Master/Slave, Single Channel
PB-PRO1-PCI/LP Master/Slave, Single Channel, Low Profile
PB-PRO1S-PCI Slave, Single Channel
PB-PRO1S-PCI/LP Slave, Single Channel, Low Profile
PB-PRO2-PCI Master/Slave, Dual Channel
The post PB-PRO1-PCI first appeared on ATEVA Technologies.]]> Echolink S7 Compact: the adaptator for S7 Communication https://www.atevatech.net/produit/echolink-s7-compact/?utm_source=rss&utm_medium=rss&utm_campaign=echolink-s7-compact Wed, 19 Jul 2023 07:56:51 +0000 https://www.atevatech.net/?post_type=product&p=35412 Echolink S7 Compact : Compact Profibus/ MPI Adapator,Gateway to access any Simens S7 PLC for programming, configuration. Give an Ethernet connection to your PLC

The post Echolink S7 Compact: the adaptator for S7 Communication first appeared on ATEVA Technologies.]]>

Echolink S7 Compact

Echolink S7 Compact  :

  • Echolink S7 Compact is an adapter for Communication with Siemens S7 Controllers
  • Integration of S7-200, S7-300 and S7-400 into Ethernet Architectures
  • PLC Programming and Communication via Interface
  • Integration into Product Management and Visualization Applications echolink S7compact
  • Integration of S7-200, S7-300 and S7-400 into 10/100 Mbit Ethernet Networks
  • Direct communication with one or several controllers in any kind of TCP network structure
  • Support of up to 16 simultaneous connections
  • Use of standard TCP/IP for communication within plant or company networks and with the Internet
  • Expansion of participants using MPI or PROFIBUS via pass-through PG port Interference-free integration into existing control systems
  • Centralized configuration of all adapters in the network via PC
  • Power supply directly from controller or via external power supply

Integration of S7-200, S7-300 and S7-400 into Ethernet Architecture

PLC Programming and Communication via Interface

Integration into Product Management and Visualization Applications

Overview

With the Echolink S7 Compact, you can integrate  S7-200, S7-300 and S7-400 via 10/100 Mbit Ethernet networks

  • Direct communication with one or more controllers over any TCP fabric
    Supports up to 16 simultaneous connections
  • Use standard TCP/IP for communication within the plant or company network and with the Internet
  • Extended communication using MPI or PROFIBUS ports via PG port.
  • interference-free integration into an existing control system
  • Central configuration of all adapters on the network via NetCon S7 software
  • Power supply directly from controller or via external power supply
  • Cost-effective solution alternative

Programming Adapter Supporting all Relevant S7 Engineering Tools

  • Interface for programming controllers via Ethernet
  • Compatibility with STEP7, TIA-Portal, WinCC and WinCC flexible
  • Display and configuration of the adapter in STEP7 or TIA portal

Application Integration through RFC1006 and OPC UA

  • Connection to HMI station and PLC directly via RFC1006 Ethernet protocol
  • Support of OPC and OPC UA by using dataFEED OPC Suite for integration into higher-level systems, e.g. for production management

Technical Data

Hardware Requirements Ethernet Interface
PC Connection RJ45
Supported Controllers Siemens S7-200, Siemens S7-300, Siemens S7-400
Supported Bus Systems PROFIBUS, MPI
Communication Type Ethernet 100 BASE-TX/10 BASE-T
Supported Transfer Rates to PLC 9.6 KBit/s … 12 MBit/s with automatic detection
Supported Transfer Rates to PC 10 / 100 MBit/s
Simultaneous Connections 16 TCP/IP, 32 MPI / PROFIBUS Connections
Power Supply 24V ± 25%, external or from Controller
Galvanic Isolation Yes
Temperature Range 0°C … +55°C
Housing, Dimensions (W x H x D) 40,6 mm x 16,7 mm x 74,3 mm
Weight Approximately 40g
Approvals CE
Protection Class IP20
Configuration Software NetCon S7 for Local and Remote Configuration
Supported Application Software Siemens TIA Portal V11-V13, Siemens STEP 7 V5.5, Siemens WinCC, Siemens WinCC flexible, Siemens ProTool
System Requirements PC/PG with Windows XP, Windows 7, Windows 8, Windows 10, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012

Downloads

Documents

Datasheet: Echolink S7 Compact

Technical specifications.

Download

User Manual

Getting started guide.

Download

References

ATV-GPL-CS-191000 echolink S7-compact

Scope of Delivery

Hardware echolink S7-compact
Software Configuration Software NetCon S7 on CD-ROM (also downloadable from Softing website)
Documentation Product handbook and configuration tutorials on CD-ROM (also downloadable from Softing website)

Additional Products and Services

ATV-LRL-DY-134501 dataFEED OPC Suite
ATV-LRL-DY-132101 dataFEED OPC Server Siemens
ATV-GAA-DX-145111 uaGate SI
ATV-GAL-YY-143101 echocollect e (and other echocollect variants)
110-1000-01 Training “Industrial Ethernet – Troubleshooting in Automation“, 3 days
The post Echolink S7 Compact: the adaptator for S7 Communication first appeared on ATEVA Technologies.]]> dataFEED OPC Suite https://www.atevatech.net/produit/datafeed-opc-suite-2/?utm_source=rss&utm_medium=rss&utm_campaign=datafeed-opc-suite-2 Mon, 17 Jul 2023 15:26:41 +0000 https://www.atevatech.net/?post_type=product&p=35407 Extended: All-in-one Data Integration Solution for OPC UA Communication as well as Big Data and IoT Cloud Connectivity, including Store And forward

The post dataFEED OPC Suite first appeared on ATEVA Technologies.]]>

Overview

dataFEED OPC Suite for a Simple and independent access to controllers and IoT devices

  • Read and write access to data in controllers from leading manufacturers
  • Use without modifiying control program
  • Easy integration of existing and new controllers into Industry 4.0 solutions
  • Integration of non-OPC UA-capable components, such as Siemens S7 controllers, into OPC UA solutions
  • Cost savings through further use of already existing OPC Classic components
  • Gateway functionality for connecting controllers and components with integrated OPC UA Server to OPC Classic applications
  • Direct connection of IoT devices (MQTT Publisher) without using an MQTT Broker

Gateway to Big Data and IoT Clouds Solutions

  • Integration of automation devices via MQTT Publisher, MindConnect and REST Client functionality in IoT cloud applications, e.g. Siemens MindSphere, Amazon AWS or Microsoft Azure
  • Easy integration of production data into NoSQL Big Data storage solutions such as MongoDB
  • State-of-the-art security by SSL/TLS support, including certificates

Easy Configuration

  • Modern, intuitive graphical user interface for fast OPC communication configuration
  • Use of smart hands-on defaults, setup wizards and drag-and-drop support
  • Time savings through effective and efficient configuration of distrubuted automation systems with many OPC UA and OPC Classic Servers

Technical details

Supported dataFEED Features OPC UA Server and Client, OPC Classic Server and Client, OPC Tunnel, MQTT, MindSphere and REST Connector,
Database Access (SQL/NoSQL), File Access, Data Exchange (in any direction between OPC UA and OPC Classic Servers or controllers), Filter, Optimizer, Concentrator, Bridge, Local Items (in any direction between OPC UA and OPC Classic Clients)
Supported Controllers Siemens SIMATIC S5, SIMATIC S7 (S7-200, S7-300, S7-400, S7-1200, S7-1500, including optimized blocks), LOGO! 8, PAC Counter and Siemens-compatible controllers like VIPA controllers
Rockwell SLC-500, PLC-5, ControlLogix and CompactLogix
Mitsubishi Melsec-Q Series with Ethernet interface card
B&R controllers with Ethernet interface
Modbus TCP-compatible controllers (Wago, Beckhoff, Phoenix, Schneider, etc.)
All controllers and devices with integrated OPC UA Server
Accessible Controller Data Inputs, outputs, data blocks, markers, timers, counters
Supported IoT Devices All devices with integrated MQTT Publisher
Supported OPC Specifications OPC Classic Data Access V1.0a, V2.05, V3.0, OPC Classic XML-DA V1.01,
OPC Alarms & Events V1.10, OPC Unified Architecture V1.02
Supported OPC UAFunctionality Data Access profile

TCP transport protocol using OPC UA binary coding

Security Methods: Basic256SSha256, Basic256

Authentication by user names and passwords including user certificate
Supported OPC Data Types VARIANT Data Types I1, UI1, I2, UI2, I4, UI4, R4, DATE, BSTR, BOOL and arrays (VT_Array) of these data types
Protocols for IoT Cloud Link MQTT Publisher:
MQTT Publisher V3.1.1, V3.1
QoS, Retain, Last Will and Testament
Security SSL/TLS including certificatesMindConnect:
HTTPS
Methoda: POST
Security: SSL including certificates, authentication via Shared Secret or RSAREST Client:
TCP, HTTP, HTTPS
Methods: PUT, POST
Security SSL and user authentification including certificates
Supported Databases NoSQL databases, e.g. MongoDB, CouchDB
ODBC enabled databases, for example, Oracle, MySQL, Microsoft SQL Server, IBM DB2,
other NoSQL- and ODBC-enabled databases upon inquiry
Operation Mode Application (OutProc Server), Windows Service
Logging, Diagnostics Logging of OPC Calls and Notifications, OPC Data, OPC Tunnel frames, text file access, database access, configurable via integrated web server diagnostic interface
Supported Operating Systems Windows 7, Windows 8, Windows 8.1, Windows Embedded 8.1 Industry, Windows 10, Windows 10 IoT Enterprise,
Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012,Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Licensing Runtime license per computer
Demo Version Full dataFEED OPC Suite, time limited to 72 hours – ( Limitation : 10 servers connections / 250 data items )

Downloads

Documents

Fiche technique : dataFEED OPC Suite (Licence étendue)

Spécifications techniques et fonctionnalités de la dataFEED OPC Suite.

Télécharger

Release Notes : dataFEED OPC Suite

Dernières modifications, corrections et nouvelles fonctionnalités.

Télécharger

dataFEED OPC Suite — Accès Cloud

Accès aux logiciels, version d’essai, manuels et documentation via notre cloud sécurisé.

Pilotes & Logiciels

dataFEED OPC Suite — Essai (72h) & Version complète v5.xx, dataFEED Exporter (Freeware).

Demander le téléchargement

Documentation

Manuel utilisateur dataFEED OPC Suite (Anglais), dernière révision complète.

Demander le téléchargement

Autre

Outil d’import de symboles pour projets Siemens STEP 7 et TIA-Portal, ressources complémentaires.

Demander le téléchargement

References

LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, OPC UA support, access of any number of OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and dataFEED OPC Tunnel Servers plus additional functionality like Database Access, File Access, Data Exchange, Optimizer, Concentrator and Bridge
HUA-DD-130001 USB Hardware Key for dataFEED OPC Suite, Version V4.01 and higher, replacing the standard Software Key

Scope of Delivery

Software dataFEED OPC Suite on CD-ROM
Documentation Manual in PDF format and Online Help in English and German

Additional Products and Services

100-1030-01 Training “OPC Server and Client in Practice”
GAA-DX-145111 dataFEED uaGate SI
GPL-CS-191000 echolink S7-compact

Options

dataFEED OPC UA

dataFEED OPC Server Siemens Serveur OPC Classic ( Option : Serveur OPC UA ) pour accès facile et rapide aux process et données de diagnostiques sur les PLC Siemens : S5, S7-200, S7-300, S7-400, S7-1200 et S7-150 ainsi que les controleurs compatible Siemens
dataFEED OPC Server B&R Serveur OPC Classic ( Option : Serveur OPC UA ) pour l’accès facile et rapide aux process et données de diagnostique sur contrôleurs B&R
dataFEED OPC Server Modbus OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in controllers providing a Modbus TCP interface, e.g. controllers from Wago, Schneider Electric or Phoenix Contact
dataFEED OPC Server Rockwell OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in Rockwell (Allen-Bradley) CLX, SLC and PLC-5 controllers
dataFEED OPC Server Mitsubishi OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in Mitsubishi Melsec-Q controllers

EXTENDED FUNCTIONALITY

dataFEED OPC Tunnel OPC Tunnel for avoiding DCOM communication problems when using OPC Classic for communication between PCs
dataFEED REST Connector REST connectivity for data integration for IoT cloud solutions, support for OPC Classic and OPC UA (optional)
dataFEED MQTT Connector MQTT Publisher functionality for easy and efficient integration of production environments and its data in IoT (internet of Things) and Industrie 4.0* solutions
dataFEED OPC Organizer UA
 OPC UA support for implementing Industrie 4.0. Allows using OPC UA (UA) for data exchange within an OPC Classic environment
dataFEED OPC Data Handler Data Handler extension for simple data exchange between controllers and OPC Servers as well as for storing process data in databases and files
dataFEED OPC Organizer Classic OPC Classic Client and OPC Classic Server, for extended OPC Classic communication functionality

Wiki

For the use of MySQL database, you would need :

You can test you OPC Classical DA with our testing solution

The post dataFEED OPC Suite first appeared on ATEVA Technologies.]]>