ATEX | ATEVA Technologies https://www.atevatech.net Votre partenaire en réseaux industriels Sat, 21 Mar 2026 17:34:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://www.atevatech.net/wp-content/uploads/2021/03/cropped-cropped-ATV_logo_web-32x32.png ATEX | ATEVA Technologies https://www.atevatech.net 32 32 Cablemaster 500/650 https://www.atevatech.net/produit/cablemaster-500-650/?utm_source=rss&utm_medium=rss&utm_campaign=cablemaster-500-650 Wed, 27 Nov 2024 05:24:52 +0000 https://www.atevatech.net/?post_type=product&p=31142

CableMaster 600

Testeur de Câblage Professionnel: Données, Voix et Vidéo

Le CableMaster 600 est un testeur de câblage professionnel pour le test des câbles réseaux, téléphoniques et coaxiaux. Muni d‘une prise RJ-45 pour les câbles réseaux et d’un connecteur de type F pour les câbles coaxiaux, le CableMaster 600 vérifie le plan de câblage et la longueur des câbles ainsi que la distance au défaut. Les résultats peuvent être sauvegardés et documentés via le logiciel PC. Le CableMaster 600 est doté d’une multitude de fonctions de diagnostic comme le traçage de câble, la détection de liaison jusqu‘à 1 Gbit/s, test de PoE et identification de prises/ports par des bouchons d‘identification.

Le CableMaster 600 est le testeur idéal et s’adresse aux installateurs professionnels et opérateurs de réseaux, chargés de tester les câbles réseaux (RJ-45), téléphoniques et coaxiaux et de documenter le câblage « correct » et la longueur des câbles.

général

    • Exécutez un test de charge PoE pour assurer le bon fonctionnement des appareils (affichage de tension et puissance)
    • La fonction capture d’écran vous permet de documenter vos résultats de test.
    • Vérifiez de manière rapide et simple votre câblage réseau et coax (connecteurs RJ45 et F-coaxiaux)
    • Affichage graphique du plan de câblage pour vérifier le bon raccordement.
    • Déterminez la longueur des câbles et la distance aux défauts du câblage par une mesure complète TDR

Détails techniques

Spécificités générales

Technologie de mesure Réflectométrie TDR (Time Domain Reflectometer) et capacité
Mesure de câble Tests de câblage et ID jusqu‘à 305 m (1.000 ft)
Détection de paires partagées : de 1 m (3 ft) à 305 m (1.000 ft)
Mesure de longueur : de 0 à 457 m (1.500 ft), ± (5%+30 cm/)
Jusqu‘à 8 unités de test/ID (RJ 45)
Jusqu‘à 20 bouchons d’identification réseau (RJ 45) et 20 bouchons d’identification coax (connecteur F)
Power over Ethernet Tests PoE conforme avec IEEE 802.3af et IEEE 802.3at (PoE Plus)
Test des classes et charges jusqu‘à 25,5 Watts (pour classe 4)
Détection de Mode A ou B (paires avec PoE)
Ethernet actif Indique les vitesses 10/100/1000 BASE-T, half ou full duplex
Reporting PDF/CSV reports with PC- Software
Tension Maximum Paramètres testeur conforment aux tensions max sur les 2 connecteurs fournis sans dégradations
– Prise RJ : 66 V CC ou 55 V CA
– Connecteur F : 50 V CC ou V CA
Capacité de stockage Jusqu‘à 250 résultats de test de câblage ou de réseau avec nom spécifié par l’utilisateur
Génération tonalité Fréquences de tonalité 730 Hz et 1440 Hz
Langues Anglais, Français, Allemand, Espagnol
Durée de vie batterie 6x AA, 9 V CC, 2.200 mAh (typique) Piles alkaline : Durée – environ 20 heures Au repos – environ 1,5 an (200 µA courant au repos maximum) Piles incluses
Températures exploitation 0 à 50 °C (32 à 122 °F) Stockage : -30 à 60 °C (-22 à 140 °F)
Altitude 10.000 ft (3048 m) operating
Humidité 10 à 90 %, sans condensation
Boîtier Plastique résistant aux chocs avec revêtement en caoutchouc, test de chute de 1,20 m
Ecran LCD couleur graphique, 7.1 cm en diagonal
Dimensions 4.7 x 9.15 x 17.3 cm
Poids piles incluses 510 g
Conforme à la norme CE

Téléchargements

Fiche technique

Guide de démarrage rapide

Manuel

Matrice de comparaison

Numéro de référence

CableMaster 600

  • Testeur de câblage professionnel, inclus 1 unité distante de test réseaux/tel et d’identification
  • 6x piles AA
  • 2x câbles RJ45
  • Câble micro USB
  • Sacoche

Accessoires

test [ivory-search id=”32743″ title=”Default Search Form”]

The post Cablemaster 500/650 first appeared on ATEVA Technologies.]]> NETLink Pro Compact https://www.atevatech.net/produit/netlink-pro-compact/?utm_source=rss&utm_medium=rss&utm_campaign=netlink-pro-compact Fri, 28 Jun 2024 08:06:37 +0000 https://www.atevatech.net/?post_type=product&p=37265 NEtlink Pro Compact USB Hardware interace gateway : MPI / Ethernet (RFC1006 )

 

The post NETLink Pro Compact first appeared on ATEVA Technologies.]]>

NETLink® PRO Compact

NEtlink Pro

Netlink Pro compact

The devices of the NETLink family serve the purpose of programming, configuring, and visualizing S7 PLCs.

  • RFC 1006 (ISO on TCP)
  • CPU-to-CPU communication (with S7-300* and S7-400*)
  • Support for all common S7 engineering tools
  • Dynamic address assignment using DHCP
  • Security functions for securing TCP/IP access
  • Switchable PLC write protection
  • Up to 16 TCP connections
  • Up to 32 MPI/PROFIBUS connections
  • Easy configuration via web interface
  • Variables can be monitored in a browser window
  • Support for slave configuration
  • Electrical isolation for MPI/PPI/PROFIBUS
  • MPI/PPI/PROFIBUS from 9.6 kbps to 12 Mbps
  • For S7-200*, S7-300*, S7-400*
  • Power can be supplied by the CPU or, alternatively, by an external DC 24 V supply

Overview

NETLink® PRO Compact

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices.
The integrated web interface offers parameterization, diagnostic, and security features, and for functional enhancements, the user can use our free diagnostic software SHTools to, for example, automatically perform firmware updates. The latest version is available for download.

The NETLink PRO Compact is a communications processor in the plug format for programming, visualization, and remote maintenance. It combines flexibility and a compact design. Power is supplied to the NETL ink® either through the CPU of the automation device or externally with DC 24 V as an option. The network connection can be used with any standard Cat-5 cable, making cable lengths up to 100 meters feasible without additional components.

Technical Data

NETLink® PRO Compact

General information

  • Order number700-884-MPI21
  • Article nameNETLink PRO Compact
  • Dimensions (DxWxH)40 x 17 x 64 mm
  • WeightApprox. 110 g
  • Supported operating systemsNo limitation (driver for SIMATIC NETLink-S7-NET only Windows XP/2003R2/7/2008R2/8.1/2012 R2/10)

Communication interface

  • Number1
  • Type10 Base-T/100 Base-TX
  • Auto MDI/MDIX
  • ProtocolFDL,RFC 1006
  • ConnectionRJ45
  • Transmission rate10/100 Mbps autom. detection

MPI/PPI/PROFIBUS interface

  • Number1
  • TypeRS485, isolated
  • ConnectionSUB-D male connector, 9-pin. with PG interface and repeater
  • Transmission ratemax. 12 Mbps autom. detection

Status indicator

  • LED5 LEDs, 2 of them bi-color

Power supply

  • Voltage supply24 V DC, 18–30 V DC
  • Current drawmax. 200 mA at DC 24 V

Ambient conditions

  • Ambient temperature0 °C … +60°C
  • Transport and storage temperature-20 °C … +80 °C
  • Relative air humidity95 % r H without condensation
  • Pollution degree2
  • Protection ratingIP20
  • ApprovalsCE

Downloads

NETLink Pro Compact — Cloud Access

Access to all downloads from our secure cloud.

Drivers & Software

Software and drivers.

Request Download

Documentation

User manual and technical documentation.

Request Download

Other

Additional resources.

Request Download

Why Choose the NETLink PRO Compact for Your S7 PLC Network?

The HELMHOLZ NETLink PRO Compact (700-884-MPI21) is the ideal MPI/PROFIBUS to Ethernet gateway for industrial automation engineers who need reliable remote access to Siemens S7 PLCs. Whether you are programming an S7-200, configuring an S7-300, or visualizing an S7-400, this compact communications processor provides seamless connectivity through the industry-standard RFC1006 protocol.

With support for up to 16 simultaneous TCP connections and 32 MPI/PROFIBUS connections, the NETLink PRO Compact is engineered for demanding industrial environments. Its electrical isolation protects your equipment, while the integrated web interface simplifies configuration and diagnostics. The device supports transmission rates from 9.6 kbps up to 12 Mbps with automatic detection, ensuring optimal performance across all bus speeds.

Frequently Asked Questions

What PLCs are compatible with the NETLink PRO Compact?

The NETLink PRO Compact is compatible with Siemens S7-200, S7-300, and S7-400 programmable logic controllers via MPI, PPI, and PROFIBUS interfaces.

What protocol does the NETLink PRO Compact use?

It uses RFC 1006 (ISO on TCP) for Ethernet communication and supports FDL protocol for fieldbus communication, enabling CPU-to-CPU data exchange.

Can I power the NETLink PRO Compact from the PLC?

Yes, the device can be powered directly from the CPU of your automation device or externally with a 24V DC power supply (18-30V DC range).

The post NETLink Pro Compact first appeared on ATEVA Technologies.]]> Smartlink HW-DP https://www.atevatech.net/produit/smartlink-hw-dp/?utm_source=rss&utm_medium=rss&utm_campaign=smartlink-hw-dp Fri, 31 May 2024 19:24:08 +0000 https://www.atevatech.net/?post_type=product&p=37025 Asset Management and Parameterization of HART devices

Asset Management and Parameterization of PROFIBUS Devices

Direct Access to Process data from your PROFIBUS Network

The post Smartlink HW-DP first appeared on ATEVA Technologies.]]>

SmartLink DP for asset Management Access Point on PROFIBUS DP networks

smartlink DP

Connection of PROFIBUS and HART devices to HART IP, OPC UA, MQTT and FDT

smartLink HW-DP provides PLC independent access to PROFIBUS DP Networks. It enables Plant Asset Management for field devices using standard industry tools and allows using HART IP as a standardized format. smartLink HW-DP is a compact tool that can be integrated without interfering with the operation of existing installations. Thus, it enables Industry 4.0 connectivity for new and existing PROFIBUS DP networks.

smartLink DP

Overview

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Independent of configuration tools
  • Centralized and time-saving parameterization of PROFIBUS and HART field devices directly from the control room
  • Access from Plant Asset Management applications for field devices configuration based on FDT / DTM and EDDL standards (acyclic master)

Ethernet Access Point to PROFIBUS DP

  • Provides 2nd channel to access the field devices
  • Acts as PROFIBUS DP master class 2
  • Support of one PROFIBUS DP segment

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFIBUS segments without requiring modification
  • Access to cyclic and acyclic data via HART-IP and OPC UA

Technical Data

Asset Management and Parameterization of HART Devices

Configuration, Parameterization, Plant Asset Management

  • Secure, standardized access to devices
  • Parallel to and independent of the controller

Inexpensive and low-risk integration

  • Connection of a large number of HART devices without rewiring the devices
  • Use of existing infrastructure using „HART over PROFIBUS“
  • Large number of supported Remote IOs

Compatible with established standard applications

  • Uses HART-IP as standard application protocol
  • Proven and tested with Emerson AMS Device Manager, ABB FIM, E+H FieldCare and PACTware

Asset Management and Parameterization of PROFIBUS Devices

Configuration, Parameterization, Plant Asset Management

  • Secure, standardized access to devices
  • Parallel to and independent of the controller

Compatible with established standard applications

  • Drivers available for FDT
  • Proven and tested with E+H FieldCare and PACTware

Direct Access to Process Data from PROFIBUS Networks

Capturing process data directly from the network

  • Live provision of all process data for further use in typical Industry 4.0 applications such as data analytics
  • Collecting data directly from the network, replacing the need to access the controller
  • No intervention in the running process

Secure provision of data using OPC UA

  • State-of-the-art transmission method in industrial networks
  • Fast update cycles over OPC UA possible

Asset Monitoring and Diagnostics in PROFIBUS Networks

Complete inventory of the entire network

  • I&M data from all connected devices
  • Automated live queries without configuration

Secure provision of data using MQTT

  • State-of-the-art transmission method for cloud connectivity
  • Information model based on OPC UA Companion Specifications for PROFINET

Health monitoring of all connected devices

  • Diagnostic messages and status of all bus stations
  • Statistics parameters for the entire network

Integrated with Softing plantPerfect Monitor application

  • Use the plantPerfect Monitor application to monitor the network with all its devices

 

 

Downloads

Documents

Datasheet: SmartLink HW-DP

Technical specifications and features.

Download

SmartLink HW-DP — Cloud Access

Access to software, documentation and drivers via our secure cloud.

Drivers & Software

Software, firmware and configuration tools.

Request Download

Documentation

User manual, quick start guide and technical documentation.

Request Download

Other

Additional resources and documentation.

Request Download

References

Scope of Delivery
Hardware smartLink HW-DP
Documentation On Website

 

Order Numbers
GEA-YN-026000 smartLink HW-DP
GEA-YN-026001 smartLink HW-DP 50, Hardware preloaded with licenses for 50 devices
GEA-YN-026002 smartLink HW-DP 100, Hardware preloaded with licenses for 100 devices
GEA-YN-026003 smartLink HW-DP 250, Hardware preloaded with licenses for 250 devices
GEA-YN-026004 smartLink HW-DP 375, Hardware preloaded with licenses for 375 devices
LRA-NN-027004 smartPlus DP, License access to one field device

 

Additional Products and Services
DBA-KM-020410 mobiLink – Mobile HART interface
LRL-TG-020000 plantPerfect Monitor, perpetual licence including 1 year software updates for 1 device
LMA-TG-020000 plantPerfect Monitor, 1 year software updates for 1 device
LAA-TG-020000 plantPerfect Monitor, 1 year rental licence for 1 device

Misc

smartLink HW-DP
Hardware Processor Intel Cyclone V SoC with dual-core ARM Cortex-A9
Status LEDs (Gateway) PWR, RUN, ERR, BUS
Real-Time Clock Real-Time clock with buffering, setting the time via browser or by NTP server (buffer time depends on conditions such as ambient temperature and duration of use)
Interfaces Ethernet 1 x IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T, Connector: RJ45
PROFIBUS DP 1 x Segment with RS485 Physical Layer, Connector: 9-pin Sub-D socket
Supported Communication Protocols HART-IP, MQTT, OPC UA, PROFIBUS DP
PROFIBUS Remote IOs Siemens:
ET 200SP: 155-6BU01-0CN0
ET 200iSP: 152-1AA00-0AB0
ET 200M: 153-2BA10-0XB0
ABB:
S800: CI801, CI840, CI840A
S900: CI920N, CI920S
Pepperl+Fuchs:
LB: LB8105, LB8106, LB8109
FB: FB8206, FB8209
R.Stahl: iS1+: CPM 9440/15-01-11
Turck:
BL20: BL20-E-GW-DP, BL20-GW-DPV1
excom: GDP 1,5
WAGO: I/O System 750: 750-333, 750-833
HART IO Modules Siemens:
ET 200SP: 134-6TD00-0CA1, 135-6TD00-0CA1
ET 200iSP: 134-7TD00-0AB0, 135-7TD00-0AB0, 134-7TD50-0AB0, 138-7FA00-0AB0
ET 200M: 332-8TF01-0AB0, 331-7TF00-0AB0, 331-7TF01-0AB0, 331-7TB00-0AB0, 332-8TF00-0AB0
ABB:
S800: AI815, AO815, AI845, AO845A, AI895, AO895
S900: AI930N, AO930N
Pepperl+Fuchs:
LB: LB3002, LB3102, LB3103, LB3105, LB4002, LB4005, LB4102, LB4105, LB3005A2, LB3006A, LB3106A, LB4106A, LB7104A
FB: FB3202B1, FB3202B2, FB3205B2, FB3205B3, FB3302B2, FB3305B2, FB4202B2, FB4202B3, FB4205B2, FB4205B3, FB4205C2, FB4302B2, FB7204B3, FB7304B3
R.Stahl: iS1+: AIM 9461/12-08-11, AOM 9466/12-08-11, AUM 9468/32-08-11
Turck:
BL20: BL20-2AIH-I, BL20-2AOH-I
excom: AIH40Ex, AOH40Ex
WAGO: I/O System 750: 750-484, 75x-842
HART-IP Applications Emerson AMS Device Manager V14.1.1, V14.5
Endress + Hauser Netilion (FieldEdge SGC500)
ABB FIM V3.01
FDT Applications PACTware, Endress + Hauser FieldCare
Physical Properties Dimensions (H x W x D) 120 mm x 28 mm x 110 mm
Weight Approx. 430g
Power Supply 18 VDC … 32 VDC; SELV/PELV power supply mandatory
Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
Typical Power Loss 5 W
Operating Temperature -40 °C … +65 °C (see detailed mounting description in user manual)
Storage Temperature -40 °C … +85 °C
Relative Humidity 10 % … 95 %, non-condensing
Cooling Convection, no fan
Mounting DIN rail 35 mm
Protection Class IP20
Conformity / Standards CE Electromagnetic compatibility (EMC) and Restriction of Hazardous Substances (RoHS)
EN 61000-6-2 Generic standards – Immunity standard for industrial environments
EN 61000-6-4 Generic standards – Emission standard for industrial environments
EN 55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements Class A
EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics –
Limits and methods of measurement Class A
EN IEC 63000:2018 RoHS, Assessment to the restriction of hazardous substances
FCC FCC 47 CFR Part 15B Section 15.109 (Class A)
VCCI VCCI Voluntary Control Council for Interferences by Information Technology Equipment, April 2015
The post Smartlink HW-DP first appeared on ATEVA Technologies.]]> edgeConnector 840D https://www.atevatech.net/produit/edgeconnector-840d/?utm_source=rss&utm_medium=rss&utm_campaign=edgeconnector-840d Tue, 28 May 2024 17:23:22 +0000 https://www.atevatech.net/?post_type=product&p=37003

Edgeconnector 840D Software module for connecting SINUMERIK 840D controllers to industrial IoT applications

edgeConnnector

Container technology with access to SINUMERIK 840D Solution Line and Power Line data via OPC UA and MQTT with flexible deployment options for higher-level applications

edgeConnector 840D connects to the Siemens SINUMERIK 840D Solution Line and Power Line controllers without any intervention in the machine configuration and provides the data as an OPC UA server. In addition, the data can also be transmitted to MQTT brokers using MQTT. All process parameters from the NC part (axis, tool, program data), as well as the PLC part (status, program sections, alarms) and the drive data can be read out. As a Docker container, the product offers flexible deployment options, e.g. on standard IPCs or devices running Azure IoT Edge or AWS IoT Greengrass.

The application can be easily configured locally via an integrated web interface. It can also be managed remotely using the REST API. The configuration is flexible and includes precisely coordinated security settings (e.g. role-based access rights for OPC UA client applications).

The new product, which is also based on virtualization and container technology, benefits from Softing’s deep experience with brownfield connectivity through MQTT and OPC UA technology and provides the data for new and highly efficient IoT solution architectures.

Edgeconnector 840D

Overview

Accessing Tooling Machine Data from OPC UA Applications

  • Provision of SINUMERIK 840D Solution Line and Power Line data
  • Pre-defined namespace, customizable for special machine data sets
  • Automatic tool recognition and listing of all available magazines and tools
  • Standardized OPC UA communication for data integration into management systems like ERP, MES, or SCADA or for data exchange with other docker containers like Microsoft OPC Publisher or Amazon AWS IoT SiteWise
  • Connection of up to 20 SINUMERIK 840D controllers with one Container Runtime
  • Reading of NC/PLC alarms, as well as GUD variables and R parameters
  • Dedicated for retrofit upgrades of existing SINUMERIK controllers

Easy Cloud-driven or Local Deployment

  • Container images stored in different online repositories like Docker Hub, Azure Container Registry (ACR) or Amazon Elastic Con-tainer Registry (ECR)
  • Simple data transmission to an MQTT broker using the MQTT publisher functionality for local or cloud-based solutions
  • Recipe manager functionality for writing process data from the cloud to controllers (MQTT Subscriber)
  • Licensing via Softing Floating License Server

Lightweight Flexible Container Solution

  • Less resources plus increased scalability and flexibility
  • Support of security standards as SSL/TLS, X.509 certificates, authentication, and data encryption
  • Highly flexible state-of-the-art application to be deployed, adjusted, or started and stopped immediately, if needed
  • Deployment and configuration also via management systems such as Kubernetes, Azure IoT Edge or AWS IoT Greengrass

Technical Data

edgeConnector 840D
Supported Controllers Siemens SINUMERIK 840D Solution Line, software version V2.7 and higher
Siemens SINUMERIK 840D Power Line, software version V5.3 and higher
Supported Protocols
  • OPC UA, MQTT
  • SIMATIC S7 (RFC1006), SINUMERIK (RFC1006
Supported MQTT Specifications V3.1, V3.1.1 & V5
Supported MQTT Features
  • MQTT Publisher & Subscriber
  • TCP, TLS/SSL, WS, WSS, (including certificates)
  • QoS, Retain, Last Will & Testament
  • Store & Forward
Supported OPC Specifications OPC Unified Architecture V1.04
OPC UA Roles OPC UA Server
OPC UA Profiles Data Access
OPC UA Security Security methods Aes256Sha256-RsaPss
Aes128SHA256-RsaOaep
Basic256Sha256
Basic256
Basic128Rsa15
None
Authentication Anonymous
Username and password
Certificate
OPC Compliance Test based on compliance test tools of OPC Foundation
Configuration Interface Authentication
  • Username / Password
  • LDAP/LDAPS
Logging, Diagnostics
  • Built-in trace and audit logging facilities, configurable and accessible through the web interface Docker integrated trace logging
  • Prometheus Metrics Information
Supported Operating Systems Linux (Docker Engine), Windows 10 and Windows 11 (Docker Desktop), Windows Server 2019 and Windows Server 2022 (Docker Enterprise Edition)
Supported Architectures AMD64, ARM64, ARM32
Supported Container Orchestration Systems Kubernetes (K8s), Amazon ECS
Minimum Hardware Requirements 320 MB free disk space, 2 GB RAM
Licensing Licensed via Softing Floating License Server
Demo Version 20 PLC connections timed at 72 hours
REST-API Access using the edgeConfigurator, download via Docker Hub

Downloads

edgeConnector 840D — Cloud Access

Access to all downloads from our cloud: License Manager, symbol files, Docker images and documentation.

Drivers & Software

Softing License Manager, edgeConnector 840D (DockerHub / Azure Marketplace).

Request Download

Documentation

Preconfigured symbol files for SINUMERIK 840D, dataFEED Exporter.

Request Download

Other

Checksums and additional resources.

Request Download

References

Scope of Delivery
Software dataFEED edgeConnector 840D, download via Docker Hub or Azure Marketplace
License Key E-mail delivery
Documentation Online help (German / English) and online: www.github.com/SoftingIndustrial/datafeed-edge-connector
Order Numbers
LRL-XX-161001 edgeConnection – Perpetual License*
LMA-XX-161001 edgeConnection – Software Upgrade License
* edgeConnection License already include 1 Year Software Upgrade license (LMA-XX-161001)
Additional Products and Services
edgeAggregator
GPA-CS-041000 NETLink S7-Compact (for S7-300/S7-400 without CP or Ethernet connection)
6FC5851-1XC45-4YA8 SINUMERIK 840D sl CNC software and SINUMERIK Operate, toolbox including NCVar Selector
(please order directly from Siemens)

Wiki

Softing dataFEED edgeConnector 840D is a containerized SINUMERIK 840D SolutionLine and PowerLine connectivity module adding OPC UA Server and MQTT Publisher functionality. The software can run as IoT Edge Module. After the deployment, it is possible to configure Southbound and Northbound communication via local GUI or REST interface.

For southbound communication it is possible to connect up to 20 SINUMERIK 840D SolutionLine and PowerLine controllers. The Namespace configuration is pre-configured and can be extended via STEP7/TIA Portal or .awl files.

The northbound communication runs with standardized OPC UA communication for data integration into management systems like ERP, MES or SCADA or for data exchange with other docker containers like Microsoft OPC Publisher for cloud scenarios. In addition MQTT is available as protocol to connect MQTT Broker in local or cloud environments.

The application supports security standards like SSL/TLS, X.509 certificates, authentication and data encryption. The container runs for 72h in demo mode. Fully activate the application via BYOL from Softing. This also requires the installation of the Softing floating license server available for Windows/Linux.

After the Docker image has been pulled, a Docker container can be started. The webserver and OPC UA Server of the module have to be exposed on the host machine if dataFEED edgeConnector 840D shall be accessed from outside the dockerized environment.

To start dataFEED edgeConnector 840D with the default ports mapped 1:1 to the host machine:

docker container run -p 443:443 -p 4897:4897 softingindustrial/edgeconnector-840d

Softing licenseServer

Softing licenseServer is used to host network software licenses (also called floating licenses or shared licenses) that are installed locally on an individual users’ machine. The network licenses can be shared among many users and/or applications.

Softing licenseServer fulfills requests to run a network application if the required license is available. When the network license is released (for example, a user closes the application), the license is moved to the license server’s available license pool and is made available for other checkout requests.

The license server is used by several Softing products like the edgeConnector or plantPerfect product families.

Please read the user guide of the licenseServer for install and usage instructions. It is available as download on the Softing product pages using the licenseServer.

Installation

Download the docker image using the following command:

docker pull softingindustrial/license-server

Use the following commands to create and configure Docker container:

mkdir -p /var/lib/license-server
mkdir -p /var/lib/license-server/licenses
mkdir -p /var/lib/license-server/config
mkdir -p /var/lib/license-server/users
docker create --name license-server -p 8000:8000 -p 6200:6200 -v /var/lib/licenseserver/licenses:/root/.x-formation -v /var/lib/license-server/users:/root/sflm/users -v /var/lib/license-server/config:/root/sflm/config --restart=always softingindustrial/license-server
docker start license-server

The following ports are used by the license server:

Port Service
6200 Network License Server
8000 HTTPS Web Server

These ports are mapped in the docker create call above 1:1 to the ports of the host system. Of course, you can map them to different ports on the host system by changing the first number on the -p option (example: -p 8400:8000).

To disable HTTPS, use the docker create command without a port mapping for port 8000.

Note: You will need access to the Web server to add licenses.

These following volumes are used by the license server:

Volume Description
/root/.x-formation Folder to store the license files
/root/sflm/users Folder to store the user data
/root/sflm/config Folder to store the configuration of the license server

The directory /var/lib/license-server is used to persist the configuration of the license server container. Of course, you can store it in a different folder on the host system by changing the first folder on the -v option (example: -v /home/xxx/ls:/root/.x-formation).

The option –restart=always will start the container on the startup of the system or restart it on failure.

Start the container with the following command:

docker start license-server

Stop the container with the following command:

docker stop license-server

Remove the container with the following command:

docker rm -f license-server

====================================

You might also be interested in ….

The post edgeConnector 840D first appeared on ATEVA Technologies.]]> FG-200 Gateway https://www.atevatech.net/produit/fg-200/?utm_source=rss&utm_medium=rss&utm_campaign=fg-200 Fri, 01 Mar 2024 09:59:58 +0000 https://www.atevatech.net/?post_type=product&p=36552 FG-200 : Fieldbus foundtation / Modbus Gateway

The post FG-200 Gateway first appeared on ATEVA Technologies.]]>

Fieldbus Foundation Gateway : FG-200

FG-200

Fieldbus Foundation Gateway :

FG-200The FG-200 HSE ( High Speed Ethernet ) /FF (  Foundation fieldbus )  Modbus Gateway : for the integration of control system on Modbus TCP

Overview

Quick and easy commissioning of the Softing gateway: FG-200FF

  • Optional support for the STHAL Carrier 9419 Bus and Fieldbus 9412 Power Supply (wiring reduced to a minimum)
  • Import Modbus data to a web server reducing mapping efforts

Optimized Management: Softing: FG-200FF

  • “Visitor” mode to avoid any interference with the network
  • Possibility of system management using different software (e.g. Emerson’s AMS) and Field Device Tool (FDT) frame applications (e.g. SMART VISION, FieldMate, Field Device Manager, FieldCare, or PACTware)
  • Redundancy capacity for Softing Gateway: FG-200FF
  • Possible redundancy link (D-3 according to FF-593)
  • Automatic mirroring with data configuration
  • Very fast redundancy

All necessary tools included

  • “FF Configuration Tool” for configuring devices and cyclical communication
  • PACTware for device configuration and basic management.

Downloads

Documents

Datasheet: FG-200 HSE/FF Modbus Gateway

Technical specifications and features of the FG-200 HSE/FF Modbus Gateway.

Download

ATEX Certificate of Conformity

Hazardous location certification documentation.

Download

Achilles Test Report

FG-200 HSE/FF cybersecurity robustness test report.

Download

FG-200 Gateway — Cloud Access

Access to software, firmware, drivers and documentation via our secure cloud.

Drivers & Software

FF HSE DTMs V1.50, Firmware FG-200FF, Search & Configure utility and additional drivers.

Request Download

Documentation

Communication Configuration Tool V2.24, user manual and technical documentation.

Request Download

Other

Whitepaper on Foundation Fieldbus gateway integration and additional resources.

Request Download

References

Description

Hardware FG-200 HSE/FF Modbus
Logiciel Outil de configuration FF, FDT CommDTM, PACTware sur CD-ROM
Documentation Quick Startup Guide, User Manual sur CD-ROM

Références

GCL-EK-024100 FG-200 HSE/FF Modbus  (Foundation fieldbus / Modbus TCP )
GCL-EK-024101 FG-200 HSE/FF Modbus, functionalité, conception identique pour une utilisation avec R. STAHL bus-Carrier Series 9419 et Alimentation Fieldbus série 9412

Misc

Modbus HSE <> Fieldbus Foundation Gateway, 4 segments FF

HS Code 85176200

Video

All our videos on the FG-200 available on our cloud

ATEVA Videos

The post FG-200 Gateway first appeared on ATEVA Technologies.]]> pnGate DP https://www.atevatech.net/produit/pngate-dp/?utm_source=rss&utm_medium=rss&utm_campaign=pngate-dp Mon, 27 Jun 2022 17:20:30 +0000 https://www.atevatech.net/?post_type=product&p=33070

pnGate DP : PROFINET Gateway for PROFIBUS Slave

pnGate DP
The pnGate DP  allows you to connect PROFIBUS slaves to a PROFINET network. Keep your PROFIBUS slaves reliable and important. no more endless lengths of Profibus cable, which cause reflection problems. the gateway, as soon as possible, will solve the problem.

Overview

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Supports major PROFINET engineering tools such as TIA Portal, Step7 und PC WORXS
  • Included CommDTM allowing use in FDT/DTM frame applications
  • EDD-based device parametrization using Siemens Simatic PDM

Direct Connectivity to PROFIBUS Segments

  • Single access point to PROFIBUS DP segment from PROFINET networks
  • Acting as PROFINET device and PROFIBUS DP master
  • Support of one PROFIBUS DP segment
  • Support of up to 32 PROFIBUS devices

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFIBUS segments without requiring modification
  • Support of MRP and S2 PROFINET redundancy for increased reliability

Downloads

Documents

Datasheet: pnGate DP

Technical specifications and features.

Download

pnGate DP — Cloud Access

Access to software, firmware, drivers and documentation via our secure cloud.

Drivers & Software

Profibus API and Drivers, Search and Configure tool, firmware.

Request Download

Documentation

User guide and technical documentation.

Request Download

Other

Additional resources.

Request Download

Reference

GCA-AN-024606 pnGate DP, PROFINET to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).
Additional Products and Services
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-AN-024608 pnGate PB, PROFINET to PROFIBUS gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
GCA-AL-024602 pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-AL-024604 pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).
The post pnGate DP first appeared on ATEVA Technologies.]]> LANTECH- SFP 2.5Gbps https://www.atevatech.net/produit/lantech-sfp-2-5gbps/?utm_source=rss&utm_medium=rss&utm_campaign=lantech-sfp-2-5gbps Thu, 10 Jun 2021 15:06:52 +0000 https://www.atevatech.net/?post_type=product&p=30052

Module SFP : 850nm VCSEL, Duplex LC, 2.5GBase-X

  • Distance: 0.3km
  • Temperature en utilisation normale: -10°C ~ 70°C
  • Temperature en utilisation extrême: -40°C ~ 85°C

Général

Les modules SFP enfichables Lantech 2.5GBase-X Small Form Factor sont conformes aux spécifications actuelles du SFP Multi-Source Agreement (MSA). L’émetteur VCSEL 850nm haute performance et le récepteur PIN haute sensibilité offrent des performances supérieures pour les applications SONET/SDH jusqu’à 0,3 km de liaisons optiques sur fibre multimode.

Caractéristiques

Caractéristiques:

  • Conforme à la norme SFP MSA
  • Conforme à l’interface de surveillance diagnostique SFP8472.
  • Conforme à 2500Base-X
  • Plugable à chaud
  • Transmetteur laser VCSEL 850nm
  • Connecteur Duplex LC
  • Interface 2 fils pour la gestion et le moniteur de diagnostic
  • Alimentation simple +3.3V
  • Distance de transmission de 0,3 km par rapport à la fibre multimode
  • Conforme à la directive RoHS

Details techniques

Absolute Maximum Ratings

Parameter

Symbol

Min.

Max.

Unit

Note

Storage Temperature

TST

-40

+85

°C

Supply Voltage

Vcc

-0.5

4.0

V

Storage Relative Humidity

RH

5

95

%

Recommended Operating Conditions

Parameter

Symbol

Min.

Typ.

Max.

Unit

Note

Case Operating Temperature
(Standard model)

TOP

-10

70

°C

Case Operating Temperature
(-E model)

TOP

-40

85

°C

Supply Voltage

Vcc

+3.15

+3.3

+3.45

V

Supply Current

ICC

240

mA

Transmitter Electro-Optical Characteristics

Parameter

Symbol

Min.

Typ.

Max.

Unit

Note

Optical launch Power

PO

-9

-3

dBm

1

Center Wavelength

λC

830

850

870

nm

Spectral Width (RMS)

Δλ

0.85

nm

Optical Extinction Ratio

ER

3.5

dB

Rise/Fall Time (10%~90%)

Tr/Tf

0.16

ns

Optical Eye Mask

ITU-T G.957 STM-16

Differential Data Input Voltage

VDIFF

400

2000

mV

Transmit Disable Voltage

VDIS

2.0

Vcc

V

Transmit Enable Voltage

VEN

GND

GND+0.8

V

Notes: 1. The optical power is launched into a 50/125μm multi-mode fiber.

Receiver Electro-Optical Characteristics

Parameter

Symbol

Min.

Typ.

Max.

Unit

Note

Receiver Sensitivity

PINMIN

-16

dBm

1

Maximum Input Power

PINMAX

-3

dBm

1

Operating Center Wavelength

λC

770

870

nm

LOS De-Assert

LOSD

-16

dBm

LOS Assert

LOSA

-30

dBm

LOS Hysteresis

LOSVHY

0.5

dB

Differential Data Output Voltage

Vout, pp

500

1200

mV

Data Output Rise/Fall Time (10%~90%)

Tr/Tf

0.18

ns

Receiver LOS Signal Output Voltage-Low

LOSVL

GND

GND+0.5

V

Receiver LOS Signal Output Voltage-High

LOSVH

2.4

Vcc

V

Notes: 1. Measured with a PRBS 231-1 test pattern @ 2488Mbps BER < 10-10

Pin Assignment


Diagram of Host Board Connector Block Pin Numbers and Name

Pin Description

Pin

Name

Function / Description

1

VeeT

 Transmitter Ground

2

TX_Fault

 Transmitter Fault Indication (1)

3

TX_Disable

 Transmission Disable – Module disables on high or open (2)

4

MOD-DEF(2)

 Module Definition 2 – SDA: Serial Data Signal

5

MOD-DEF(1)

 Module Definition 1 – SCL: Serial Clock Signal

6

MOD-DEF(0)

 Module Definition 0 – LVTTL Low (3)

7

Rate Select

 Not Connected – Open Circuit

8

LOS

 Receiver Loss of Signal (4)

9

VeeR

 Receiver Ground

10

VeeR

 Receiver Ground

11

VeeR

 Receiver Ground

12

RD-

 Inverse Received Data out, Differential LVPECL, AC coupled

13

RD+

 Received Data out, Differential LVPECL, AC coupled

14

VeeR

 Receiver Ground

15

VccR

 Receiver Power

16

VccT

 Transmitter Power

17

VeeT

 Transmitter Ground

18

TD+

 Transmitter Data In, Differential LVPECL, AC coupled

19

TD-

 Inverse Transmitter Data In, Differential LVPECL, AC coupled

20

VeeT

 Transmitter Ground
Note1: TX Fault is open collector/drain output which should be pulled up externally with a 4.7K~ 10KΩ resistor on the host board to supply <VccT+0.3V or VccR+0.3V. When high, this output indicates a laser fault of some kind. Low indicates normal operation. In the low state, the output will be pulled to <0.8V.
Note2: TX Disable input is used to shut down the laser output per the state table below. It is pulled up within the module with a 4.7K~10KΩ resistor. 1)Low(0~0.8V): Transmitter on; 2)Between(0.8V and 2V): Undefined; 3)High (2.0~ VccT): Transmitter Disabled; 4)Open: Transmitter Disabled
Note3: Mod-DEF 0, 1, 2. These are the module definition pins. They should be pulled up with a 4.7K~10KΩ resistor on the host board to supply less than VccT+0.3V or VccR+0.3V. Mod-DEF(0) is grounded by the module to indicate that the module is present. Mod-DEF(1) is clock line of two wire serial interface for optional serial ID. Mod-DEF(2) is data line of two wire serial interface for optional serial ID.
Note4: LOS (Loss of signal) is an open collector/drain output which should be pulled up externally with a 4.7K~10KΩ resistor on the host board to supply <VccT+0.3V or VccR+0.3V. When high, this output indicates the received optical power is below the worst case receiver sensitivity (as defined by the standard in use). Low indicates normal operation. In the low state, the output will be pulled to <0.8V.

Références

Références

Longueur d’ondes

Distance

Temp.
ATV-8330-262

850nm

0.3km

-10~70°C
ATV-8330-262-E

850nm

0.3km

-40~85°C
The post LANTECH- SFP 2.5Gbps first appeared on ATEVA Technologies.]]> licnce https://www.atevatech.net/produit/licnce/?utm_source=rss&utm_medium=rss&utm_campaign=licnce Tue, 11 May 2021 09:41:55 +0000 https://www.atevatech.net/?post_type=product&p=29833