OVERVIEW

Lantech T(P)ES-0008CB is an 8 10/100 Base-TX with M12-connectors EN50155 unmanaged Ethernet switch with IP54 rated protection which meets the high-reliability requirements demanded by industrial rolling stock applications.

Redundant dual 24VI/24TVI input with max PoE budget; inrush current prevention and polarity reverse protection
The T(P)ES-0008CB 24VI model accepts 9~36VDC dual input and 24TVI model accepts 16.8~56VDC with galvanic isolation to PoE and all Ethernet ports. PoE feeding with 80W budget from internal power. The redundant power input design prevents inrush current and safeguards against polarity reversal.

E-marking certificate, ITxPT*; ISO 7637-2 compliant and extended working temperature
The T(P)ES-0008CB is designed to meet with critical network environment with IP54 enclosure and M12 connectors for protection against dust and water. It has passed harsh environmental testing to comply with Industrial EMI and Safety standards as well as stability testing such as Free fall, Shock, and vibration. It is labeled with ITxPT* public transport standards and also compliant with ISO 7637-2 which protects switch from being damaged by high voltage that could be found at vehicle cranky start. For greater flexibility in application the T(P)ES-0008CB supports an extended operating temperature range from -40°C to 75°C.

Efficient PoE configuration when ignition off
Supports optional PoE feeding OFF timer (1/5/10mins or others) at ignition off mode to prevent car battery drain-out. (-IGN model) The E-marking certificate makes it the most suitable switch for bus, carriage, other vehicle applications as well as for industrial areas where the power source is limited with 12V or 24V but has demand of IP surveillance or VoIP applications. ※The optional PoE off-timer is available after February 23, 2024.

Lantech IPGS-3408GSFP is a high performance L2+ (Gigabit uplink) switch with 8 10/100/1000T + 4 1000M SFP w/8 PoE 802.3af/at ports which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode , multiple VLAN mode with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+**, SSH v2/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.

 

Up to 8 PoE at/af ports w/advanced PoE management
Compliant with 802.3af/at standard, the Lantech IPGS-3408GSFP is able to feed each PoE port up to 30 Watts@54 VDC providing the connected PD devices. Lantech IPGS-3408GSFP supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE ports can be Enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI.

 

Miss-wiring avoidance, Loop protection, Node failure protection
The IPGS-3408GSFP also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPGS-3408GSFP is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

 

DHCP option 82 & Port based, Mac based DHCP, Option66, DHCP Snooping, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Snooping is supported. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Basic IPv6 DHCP service can be supported.

 

User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes IPGS-3408GSFP much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.

 

Enhanced G.8032 ring, 16 MSTI MSTP; MRP ring
Lantech IPGS-3408GSFP features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, basic ring, multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows RSTP over VLAN for redundant links with 16 MSTI.

 

MRP (Media Redundancy Protocol) can be supported for industrial automation networks.

 

Editable configuration file
The configuration file of Lantech IPGS-3408GSFP can be exported and edited with word processor for the other switches configuration with ease. The factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead.

 

QoS by VLAN for legacy device
QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.

 

QinQ, QoS and GVRP supported
It supports the QinQ, QoS, GVRP for large VLAN segmentation.

 

802.1X security by MAC address
MAC-based port authentication is an alternative approach to 802.1x for authenticating hosts connected to a port. By authenticating based on the host’s source MAC address, the host is not required to run a user for the 802.1x protocol. The RADIUS server that performs the authentication will inform the switch if this MAC can be registered in the MAC address table of switch.

 

IGMPv3,GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port, MLD snooping and static multicast forwarding binding by ports for video surveillance application.

 

Event log & message; 2 DI + 2DO
In case of event, the IPGS-3408GSFP is able to send an email to pre-defined addresses as well as SNMP Traps out immediately. It provides 2DI and 2DO when disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

 

Optional environmental monitoring for switch inside information (-M model)
The optional environmental monitoring can detect switch overall temperature, voltage, total PoE load and current where can send the SNMP traps, email when abnormal.

 

Wide range dual DC powered input with galvanic isolation; Relay contact alarm, High ESD protection
The Lantech IPGS-3408GSFP is designed with dual power supply at 24/48VDC or single power supply at 90~305VAC/120~430VDC. Featured with relay contact alarm function, the IPGS-3408GSFP is able to connect with alarm system in case of power failure. The IPGS-3408GSFP also provides ±2000V EFT/SURGE and ±4000 VDC (Contact) / ±8000 VDC (Air) Ethernet ESD protection, which can reduce unstable situation caused by power line and Ethernet.

 

Industrial hardened design for extended temperature operation
Lantech IPGS-3408GSFP features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.

 

The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

Finisar 500m Duplex SFP Transceiver | FTLF8524P2BNV

The Finisar FTLF8524P2BNV 1000BASE-SX Ethernet transceiver is a Duplex SFP transceiver for optical communications, rated for distances up to 500m and a maximum bandwidth of 4.25Gbps. The FTLF8524P2BNV transceiver operates at 850nm wavelength. 4Gb/s 850nm FC -20 to 85C, Rate Select SFP. Finisar FTLF8524P2xNV SFP transceivers are compatible with the small form factor pluggable MSA.. Note: Due to manufacturer restrictions, Finisar FTLF8524P2BNV is a non-cancellable & non-returnable product. Please call to confirm stock. This product is manufactured by Finisar USA, ships directly from Finisar and is covered by full manufacturer warranty within the USA. For most up-to-date specifications, refer to datasheets on Finisar website. Images are for illustrative purposes only.

Le switch Lantech IGS-0008B, est un switch 8-Port 10/100/1000T Industriel. Afin d’augmenter la fiabilité, il fournit une alimentation redondante, detecte la tension d’entée et accèpte une tension étendue de 9.5v à 60VDC.

Pour une meilleure stabilité et performance, le IGS-008B supporte les trames “jumbo ” jusqu’à 10k Octet.

Le IGS -0008B, est conçu pour satisfaire les demandes les plus exigentes de l’industrie et est fournit avec un boitier IP30. Il a été testé pour satisfaire les exigence de compatibilité electromagnetique et interférences. C’est un switch robuste, anti choc, stabilité aux tests de vibration.

IGS-0008B is compact in size and easy to be installed with DIN rail and wall mount** kits. IGS-0008B is applicable in many kinds of industrial environments.

Finisar 500m Duplex SFP Transceiver | FTLF8524P2BNV

The Finisar FTLF8524P2BNV 1000BASE-SX Ethernet transceiver is a Duplex SFP transceiver for optical communications, rated for distances up to 500m and a maximum bandwidth of 4.25Gbps. The FTLF8524P2BNV transceiver operates at 850nm wavelength. 4Gb/s 850nm FC -20 to 85C, Rate Select SFP. Finisar FTLF8524P2xNV SFP transceivers are compatible with the small form factor pluggable MSA.. Note: Due to manufacturer restrictions, Finisar FTLF8524P2BNV is a non-cancellable & non-returnable product. Please call to confirm stock. This product is manufactured by Finisar USA, ships directly from Finisar and is covered by full manufacturer warranty within the USA. For most up-to-date specifications, refer to datasheets on Finisar website. Images are for illustrative purposes only.