PROFINET | ATEVA Technologies

SmartLink HW PN

Webmaster — Wed, 10 Sep 2025 10:50:36 +0000

SmartLink HW PN

PROFINET Gateway for Asset Management

Access PROFINET networks via FDI and OPC UA

smartLink HW-PN provides access to PROFINET networks. By integrating standardized technologies like a FDI communication server (OPC UA), it provides transparent access to all connected devices.

smartLink HW-PN can be used for asset management, device configuration and monitoring.

Asset Management and Parameterization of PROFINET Devices

Parameterization and Asset Management

Secure, standardized access to devices
Parallel to and independent of the controller

Compatible with established communication standards

Implements the standard FDI communication server interface based on OPC UA

Asset Management and Parameterization of PROFIBUS Devices

Parameterization and Asset Management

Secure, standardized access to devices
Parallel to and independent of the controller

Inexpensive and low-risk Integration

Connection of PROFIBUS devices without additional hardware
Use of existing infrastructure using the PROFINET/PROFIBUS proxy standard for connecting to the PROFIBUS devices

Compatible with established communication standards

Implements the standard FDI communication server interface based on OPC UA

Parameterization and Asset Management

Independent of PROFINET engineering tools
Centralized and time-saving asset management of PROFINET networks with PROFINET and PROFIBUS field devices directly from the control room

Ethernet Access Point to PROFINET networks

Provides 2nd channel to access the field devices
Acts as a PROFINET supervisor
Is part of one PROFINET network
Integrated 2-port switch for use in line or ring network topologies

Key Component for Transition to State-of-the-Art Technology

Re-use of existing PROFINET networks without requiring modification
Access to acyclic data via FDI communication server (OPC UA)

Technical Data

smartLink HW-PN
Hardware	Processor	Altera Cyclone V SoC with dual-core ARM Cortex-A9
	Status LEDs (Gateway)	PWR, RUN, ERR, BUS
	Real-Time Clock	Real-Time clock with buffering, setting the time via browser or by NTP server (buffer time depends on conditions such as ambient temperature and duration of use)
Interfaces	Ethernet	1 x IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T, Connector: RJ45
	PROFINET	2 x IEEE802.3 10BASE-T/100BASE-TX, Connector: RJ45; Embedded PROFINET 2-port switch for line or ring topology Protocol: PROFINET RT / IRT, Support of PROFINET redundancy protocols
Supported	Communication Protocols	PROFINET, PROFIBUS
	PROFINET/PROFIBUS Proxies	Softing: pnGate DP, pnGate PA aplSwitch Field PA
Physical Properties	Dimensions (H x W x D)	120 mm x 28 mm x 110 mm
	Weight	Approx. 430g
	Power Supply	18 VDC … 32 VDC; SELV/PELV power supply mandatory Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
	Typical Power Loss	5 W
	Operating Temperature	-40 °C … +65 °C (see detailed mounting description in user manual)
	Storage Temperature	-40 °C … +85 °C
	Relative Humidity	10 % … 95 %, non-condensing
	Cooling	Convection, no fan
	Mounting	DIN rail 35 mm
	Protection Class	IP20
Conformity / Standards	CE	Electromagnetic compatibility (EMC) and Restriction of Hazardous Substances (RoHS) EN 61000-6-2 Generic standards – Immunity standard for industrial environments EN 61000-6-4 Generic standards – Emission standard for industrial environments EN 55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements Class A EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement Class A EN 50581:2012/EN IEC 63000:2018 RoHS, Assessment to the restriction of hazardous substances
	FCC	FCC 47 CFR Part 15B Section 15.109 (Class A)
	VCCI	VCCI Voluntary Control Council for Interferences by Information Technology Equipment, April 2015

References

Scope of Delivery
Hardware	smartLink HW-PN
Documentation	User Guide as PDF download

Order Numbers
GEA-YA-026010	smartLink HW-PN
LRA-AA-027003	smartPlus PN, License access to one field device

Video

The post SmartLink HW PN first appeared on ATEVA Technologies.

dataFEED OPC Suite

Webmaster — Mon, 17 Jul 2023 15:26:41 +0000

dataFEED OPC Suite for a Simple and independent access to controllers and IoT devices

Read and write access to data in controllers from leading manufacturers
Use without modifiying control program
Easy integration of existing and new controllers into Industry 4.0 solutions
Integration of non-OPC UA-capable components, such as Siemens S7 controllers, into OPC UA solutions
Cost savings through further use of already existing OPC Classic components
Gateway functionality for connecting controllers and components with integrated OPC UA Server to OPC Classic applications
Direct connection of IoT devices (MQTT Publisher) without using an MQTT Broker

Gateway to Big Data and IoT Clouds Solutions

Integration of automation devices via MQTT Publisher, MindConnect and REST Client functionality in IoT cloud applications, e.g. Siemens MindSphere, Amazon AWS or Microsoft Azure
Easy integration of production data into NoSQL Big Data storage solutions such as MongoDB
State-of-the-art security by SSL/TLS support, including certificates

Easy Configuration

Modern, intuitive graphical user interface for fast OPC communication configuration
Use of smart hands-on defaults, setup wizards and drag-and-drop support
Time savings through effective and efficient configuration of distrubuted automation systems with many OPC UA and OPC Classic Servers

Technical details

Supported dataFEED Features	OPC UA Server and Client, OPC Classic Server and Client, OPC Tunnel, MQTT, MindSphere and REST Connector, Database Access (SQL/NoSQL), File Access, Data Exchange (in any direction between OPC UA and OPC Classic Servers or controllers), Filter, Optimizer, Concentrator, Bridge, Local Items (in any direction between OPC UA and OPC Classic Clients)
Supported Controllers	Siemens SIMATIC S5, SIMATIC S7 (S7-200, S7-300, S7-400, S7-1200, S7-1500, including optimized blocks), LOGO! 8, PAC Counter and Siemens-compatible controllers like VIPA controllers Rockwell SLC-500, PLC-5, ControlLogix and CompactLogix Mitsubishi Melsec-Q Series with Ethernet interface card B&R controllers with Ethernet interface Modbus TCP-compatible controllers (Wago, Beckhoff, Phoenix, Schneider, etc.) All controllers and devices with integrated OPC UA Server
Accessible Controller Data	Inputs, outputs, data blocks, markers, timers, counters
Supported IoT Devices	All devices with integrated MQTT Publisher
Supported OPC Specifications	OPC Classic Data Access V1.0a, V2.05, V3.0, OPC Classic XML-DA V1.01, OPC Alarms & Events V1.10, OPC Unified Architecture V1.02
Supported OPC UAFunctionality	Data Access profile TCP transport protocol using OPC UA binary coding Security Methods: Basic256SSha256, Basic256 Authentication by user names and passwords including user certificate
Supported OPC Data Types	VARIANT Data Types I1, UI1, I2, UI2, I4, UI4, R4, DATE, BSTR, BOOL and arrays (VT_Array) of these data types
Protocols for IoT Cloud Link	MQTT Publisher: MQTT Publisher V3.1.1, V3.1 QoS, Retain, Last Will and Testament Security SSL/TLS including certificatesMindConnect: HTTPS Methoda: POST Security: SSL including certificates, authentication via Shared Secret or RSAREST Client: TCP, HTTP, HTTPS Methods: PUT, POST Security SSL and user authentification including certificates
Supported Databases	NoSQL databases, e.g. MongoDB, CouchDB ODBC enabled databases, for example, Oracle, MySQL, Microsoft SQL Server, IBM DB2, other NoSQL- and ODBC-enabled databases upon inquiry
Operation Mode	Application (OutProc Server), Windows Service
Logging, Diagnostics	Logging of OPC Calls and Notifications, OPC Data, OPC Tunnel frames, text file access, database access, configurable via integrated web server diagnostic interface
Supported Operating Systems	Windows 7, Windows 8, Windows 8.1, Windows Embedded 8.1 Industry, Windows 10, Windows 10 IoT Enterprise, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012,Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Licensing	Runtime license per computer
Demo Version	Full dataFEED OPC Suite, time limited to 72 hours – ( Limitation : 10 servers connections / 250 data items )

Documents

Fiche technique : dataFEED OPC Suite (Licence étendue)

Spécifications techniques et fonctionnalités de la dataFEED OPC Suite.

Télécharger

Release Notes : dataFEED OPC Suite

Dernières modifications, corrections et nouvelles fonctionnalités.

Télécharger

dataFEED OPC Suite — Accès Cloud

Accès aux logiciels, version d’essai, manuels et documentation via notre cloud sécurisé.

Pilotes & Logiciels

dataFEED OPC Suite — Essai (72h) & Version complète v5.xx, dataFEED Exporter (Freeware).

Demander le téléchargement

Documentation

Manuel utilisateur dataFEED OPC Suite (Anglais), dernière révision complète.

Demander le téléchargement

Autre

Outil d’import de symboles pour projets Siemens STEP 7 et TIA-Portal, ressources complémentaires.

Demander le téléchargement

References

LRL-DY-134501	dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, OPC UA support, access of any number of OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and dataFEED OPC Tunnel Servers plus additional functionality like Database Access, File Access, Data Exchange, Optimizer, Concentrator and Bridge
HUA-DD-130001	USB Hardware Key for dataFEED OPC Suite, Version V4.01 and higher, replacing the standard Software Key

Scope of Delivery

Software	dataFEED OPC Suite on CD-ROM
Documentation	Manual in PDF format and Online Help in English and German

Additional Products and Services

100-1030-01	Training “OPC Server and Client in Practice”
GAA-DX-145111	dataFEED uaGate SI
GPL-CS-191000	echolink S7-compact

dataFEED OPC UA

dataFEED OPC Server Siemens	Serveur OPC Classic ( Option : Serveur OPC UA ) pour accès facile et rapide aux process et données de diagnostiques sur les PLC Siemens : S5, S7-200, S7-300, S7-400, S7-1200 et S7-150 ainsi que les controleurs compatible Siemens
dataFEED OPC Server B&R	Serveur OPC Classic ( Option : Serveur OPC UA ) pour l’accès facile et rapide aux process et données de diagnostique sur contrôleurs B&R
dataFEED OPC Server Modbus	OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in controllers providing a Modbus TCP interface, e.g. controllers from Wago, Schneider Electric or Phoenix Contact
dataFEED OPC Server Rockwell	OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in Rockwell (Allen-Bradley) CLX, SLC and PLC-5 controllers
dataFEED OPC Server Mitsubishi	OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in Mitsubishi Melsec-Q controllers

EXTENDED FUNCTIONALITY

dataFEED OPC Tunnel	OPC Tunnel for avoiding DCOM communication problems when using OPC Classic for communication between PCs
dataFEED REST Connector	REST connectivity for data integration for IoT cloud solutions, support for OPC Classic and OPC UA (optional)
dataFEED MQTT Connector	MQTT Publisher functionality for easy and efficient integration of production environments and its data in IoT (internet of Things) and Industrie 4.0* solutions
dataFEED OPC Organizer UA	OPC UA support for implementing Industrie 4.0. Allows using OPC UA (UA) for data exchange within an OPC Classic environment
dataFEED OPC Data Handler	Data Handler extension for simple data exchange between controllers and OPC Servers as well as for storing process data in databases and files
dataFEED OPC Organizer Classic	OPC Classic Client and OPC Classic Server, for extended OPC Classic communication functionality

Wiki

For the use of MySQL database, you would need :

To download the latest ODBC MySQL Driver : MySQL community Download

You can test you OPC Classical DA with our testing solution

OPC Client demo

Video

The post dataFEED OPC Suite first appeared on ATEVA Technologies.

DATAEAGLE 4000 Series – Wireless Profinet

Webmaster — Tue, 25 Apr 2023 17:27:14 +0000

DATAEAGLE 4000 Series – WIRELESS PROFINET

DATAEAGLE 4000 – Wireless PROFINET

Our DATAEAGLE 4000 product line has been specially developed for the implementation of Wireless PROFINET. With its patented filter technology, this wireless 4000 series ensures an optimal, reliable wireless connection and is versatile in its application. See for yourself!

Overview

Wireless PROFINET – In practice

As a rule, sensor and application data from machines in the field level are transmitted to a control system for use. If this has to be done wirelessly in view of moving parts – e.g. in sewage treatment plants or with cranes – radio connections are used which are aligned with the field bus used in each case: The modules of the DATAEAGLE 4000 series “speak and understand” PROFINET with or without PROFIsafe support. The patented data pre-processing integrated in the module, including a filter function, achieves a particularly high level of system availability.

Wireless solutions from Schildknecht can be replaced 1:1 with existing cables – without any changes to the machine. The exchange can be carried out quickly and easily by a company electrician, extensive adjustments or new certifications are not necessary. With DATAEAGLE, no integration of data transmission into the hardware configuration is necessary. The device description files GSD (PROFIBUS) or GSDML (PROFINET) do not have to be changed and the “cable” configuration can be retained. You still encounter questions during installation? Then the Schildknecht commissioning guarantee will help!

Technical Data

The DATAEAGLE 4000 series was developed especially for the transparent transmission of PROFINET IO by utilization of diverse radio technologies.

Suitable for applications in indoor and outdoor applications. The high degree of protection enables use under extreme conditions.

The use of our patented filter technology guarantees a highly reliable and error-free radio link.
All devices with a PROFINET IO interface can be connected via radio. No device configuration necessary ? Plug&Play.

Safety related devices are supported with the DATAEAGLE 4712 Series through PROFIsafe for PROFINET IO.

The range depends on the radio technology used and the conditions of the surroundings.
Typical parameters include a range of 100m ? 300m (47xx) or 1km ? 3km (431x).

Thousands of applications are already successfully in use.

TECHNICAL DATA – DATAEAGLE COMPACT 4000 Series

PROTOCOL	PROFINET
VOLTAGE SUPPLY	24 V DC
CONNECTION VOLTAGE SUPPLY	Terminal clamps
POWER CONSUMPTION	150 mA
MOUNTING	DIN rail mounting
CONFORMITY	CE, FCC
IP RATING	IP20
TEMPERATURE RANGE	-20…+60 °C
FREQUENCY	2,4 GHz
MAXIMUM NUMBER OF RADIO SLAVES	4
TYPICAL DISTANCE (M)	300
MAXIMUM PROFINET TRANSMISSION RATE	100 MBit/s
INTERFACE PORT	RJ 45 / M12
MAXIMUM NUMBER OF PROFINET DEVICES	6
PROFISAFE	Yes
INTEGRATED SWITCH	Yes

Downloads

Documents

Presentation: DATAEAGLE 4000 – Wireless PROFINET

Product overview and key features.

Download

DATAEAGLE 4000 — Cloud Access

Access to all documentation via our secure cloud.

Drivers & Software

Configuration tools and software.

Request Download

Documentation

Datasheets, user manuals and technical documentation.

Request Download

Other

Additional resources.

Request Download

References

100m – 300m (4710-A Series)
1km – 3km (4300-A Series)
Supports PROFIsafe
Protection Class: IP 65

Training

Misc

Application examples

Replacement of conductor lines
Replacement of trailing cable / cable chains
Replacement of optical coupler
Cranes / crane systems
Storage systems
Transport vehicles
Water, sewage and raw materials management
Machine construction
Lifts / Elevators
Automotive industry

Video

All our Webinars available on our Cloud

The post DATAEAGLE 4000 Series – Wireless Profinet first appeared on ATEVA Technologies.

pnGate DP

Webmaster — Mon, 27 Jun 2022 17:20:30 +0000

pnGate DP : PROFINET Gateway for PROFIBUS Slave

The pnGate DP allows you to connect PROFIBUS slaves to a PROFINET network. Keep your PROFIBUS slaves reliable and important. no more endless lengths of Profibus cable, which cause reflection problems. the gateway, as soon as possible, will solve the problem.

Overview

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

Supports major PROFINET engineering tools such as TIA Portal, Step7 und PC WORXS
Included CommDTM allowing use in FDT/DTM frame applications
EDD-based device parametrization using Siemens Simatic PDM

Direct Connectivity to PROFIBUS Segments

Single access point to PROFIBUS DP segment from PROFINET networks
Acting as PROFINET device and PROFIBUS DP master
Support of one PROFIBUS DP segment
Support of up to 32 PROFIBUS devices

Key Component for Transition to State-of-the-Art Technology

Re-use of existing PROFIBUS segments without requiring modification
Support of MRP and S2 PROFINET redundancy for increased reliability

Downloads

Documents

Datasheet: pnGate DP

Technical specifications and features.

Download

pnGate DP — Cloud Access

Access to software, firmware, drivers and documentation via our secure cloud.

Drivers & Software

Profibus API and Drivers, Search and Configure tool, firmware.

Request Download

Documentation

User guide and technical documentation.

Request Download

Other

Additional resources.

Request Download

Reference


GCA-AN-024606	pnGate DP, PROFINET to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

Additional Products and Services
LRL-DY-134501	dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-AN-024608	pnGate PB, PROFINET to PROFIBUS gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
GCA-AL-024602	pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-AL-024604	pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).

Vidéos

The post pnGate DP first appeared on ATEVA Technologies.

Certificator : NetXpert XG2

Webmaster — Tue, 03 Aug 2021 17:09:02 +0000

NetXpert XG2 : Test, verify and certify your Ethernet Network . let Garanty the speed on your cable.

NetXpert: the ultimate solution

The speeds of “Wireless Access points” often exceed the speeds of cabling installed in the network. Is it possible that your cables handle speeds well beyond their specifications? Is it possible that your CAT5e or CAT6 cables can reach speeds of 1GBits/S or even 10Gbits/s?

To find out, a simple function on the NetXpert XG2 allows you to perform 3 tests. Performs a speed test by sending 1Gb/s of data via your cable (BERT Test) and it will prove if it will perform beyond specifications and follow the speed of the installed “Access Points”

The NetXpert is the only cable tester and active network manager to perform Bit Error Rate Test (BERT), Signal to Noise Test (SNR) and Speed Delay of 1Gb/s, 5Gb/ s or 10Gb/s at the touch of a button. You can now perform real-time throughput tests to validate your cables up to 10Gb/s.

Test error rate, noise and propagation delay instantly

By performing a bit error rate test (BERT) and according to IEE802.3an standards, the NetXpert XG certifies you or not, error-free data transmission up to 10Gb/s

One-touch self-test includes Signal-to-Noise Ratio (SNR) and Time Offset, which can have a significant impact on Gigabit transmission

The signal-to-noise ratio verifies that the noise is low enough and the signal is high enough for reliable transmission. “Propagation delay” indicates an offset between wire pairs. Excessive delay can cause serious degradation of transmission and therefore performance.

The 3 basic measurements to determine whether a transmission is reliable or not can be done with just one touch. Once the measurement is done, you can repeat it immediately using this unique function. Each measurement is archived and provided with a final summary report in PDF, CVS or XML format

Dépannage du réseau actif PoE++

Lors de dépannage de réseaux actifs PoE++ , le NetXpert XG offre une série de mesures exhaustives. Cela inclut le test de charge pour vérifier la perte de tension et assurer ainsi une stabilité de l’alimentation PoE, l’identification des appareils connectés au réseau et la détection de la disponibilité d’appareils prioritaires.
Le NetXpert XG offre un espace de stockage interne suffisant pour de gros projets et génère des rapports de test complets conformément aux normes en vigueur. Sa large gamme d’accessoires fait du NetXpert XG l’outil de qualification incontournable – de la localisation individuelle de câble et son générateur de tonalité intégré ou bien ses bouchons d’identifications en passant par la génération de rapports de mesure et le dépannage de réseaux PoE++.

Général

The cable qualifier that is defining a new category — the cable project qualifier

If you are a cable installer, network owner, network builder, or system integrator, you’ll be excited to hear that NetXpert XG includes a project editor and auto test generator for up to 1000 cables, and test reports you can keep for your records or leave with your customer. Once the tests are created, plug in the cable, click test, and NetXpert XG starts testing the cable to IEEE 802.3 standards to prove the speed of your cable. Not only do you get a wiremap and cable length, NetXpert XG tests BERT, SNR, Delay Skew, distance to opens, shorts, or miswires. As a bonus you get active network tests for copper, fiber, and wireless. And, with 2 NetXpert XG local units, you can test fiber cables.

Cable Project Qualifier

Use the project editor, cable test editor, test label editor to pre-configure your cable testing projects
Press test to automatically sequence up to 1000 cable tests from the local or remote device to increase cable testing efficiency when working alone
Test data cabling for IEEE 802.3 compliance at data rates up to 10 Gb/s (BERT)
Determine signal-to-noise ratio (SNR) for compliance up to 10 Gb/s
Measure delay skew for compliance up to 10Gb/s
Measure length of cable with TDR and capacitance measurements for highly accurate test results and easier troubleshooting
Full-color wire map shows distance to open, distance to short, miswires, split pairs, and shield on a color graphical display
Save test results and generate standards-based measurement reports providing “Pass/Fail” indication in pdf, csv, or xml format

Perform active network management

Support for IPv4 and IPv6
Discover your network and see the connected network devices
Identifies defective PoE switches with a PoE load test
DHCP test
Ping lists can be defined and saved for later use
LLDP/CDP detection and analysis
Identifies VLANs present in your network
Data transfer from the tester to the PC using USB stick, wireless, or bluetooth connectivity

Details Techniques

Length Measurement Technology	Time-Domain Reflectometry (TDR) and capacitance
Cable Measurements	Cable Testing and ID: up to 1,000 ft (305 m) Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m) Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft (30 cm)) Distance to fault: 0 to 656 ft (200 m) ± (5% + 3ft (1m)) Supports 8 wiremap remotes (RJ 45) and 24 RJ-45 ID only remotes
Power over Ethernet (PoE)	Test supports IEEE 802.3af PoE (Type 1, max 15.4W), IEEE 802.3at PoE+ (Type 2, 30W) and 802.3bt PoE++ (Type 3, 60W) Future proofed for IEEE 802.3bt Type 4 100W higherpower PoE
Active Ethernet	Network and test support by interface: Copper RJ-45 interface –100/1,000/2,500/5,000/10,000 Mb/sec link speeds Fiber SFP+ #1 interface supports 10Gb/sec link speed Fiber SFP+ #2 interface supports 1Gb/sec link speed WiFi 802.11 a/b/g/n 2.4 Ghz WiFi and Bluetooth
Maximum Voltages	Maximum voltage that can be applied to any 2 connector pins without causing damage to the tester: RJ-45: 60 VDC or 50 VAC
Save Test Results	Stores virtually unlimited cable or network tests with user defined names per project
Tone Generation	Tone Frequencies: 730 Hz and 1440 Hz
Languages	English, German, French, Spanish
Battery	Li-Ion, 7.2 VDC, 3.1A-hr (typical) Battery Life at 10Gb: 5 hrs minimum, 24 hrs stand-by
Temperature	Operating: 14 to 140° F (-10 to 60°C) Storage: -22 to 158°F (-30 to 70°)
Humidity	10 to 90% non-condensing
Enclosure	Injection molded plastic
Display	7″ Color TFT-LCD capacitive touch display, 1024 x 600 resolution (WSVGA)
Size	245 x 177 x 73 mm (main unit) 130 x 177 x 55 mm (Active Remote)
Weight with Battery	2.6lbs (1.2 kg) main unit 1.3lbs (0.6 kg) Active Remote

Téléchargement

Documents :

References

Comparaison


Features	NetXpert XG PLUS	NetXpert XG 10G	NetXpert XG 2.5/5G	NetXpert XG 1G
Active network test on Copper
Passive qualification test on Copper
Active network test on Fiber Optic (SM/MM)
Passive qualification test on Fiber Optic (SM/MM)
Maximum speed:	10Gbps	10Gbps	5Gbps	1Gbps

Mainframe unit:	2	1	1	1
Active remote unit:	1	1	1	1

Upgradeable to NetXpert XG – 2.5/5G
Upgradeable to NetXpert XG – 10G
Upgradeable to NetXpert XG – PLUS

Compatible with Fiber Microscope
Compatible with Cable Probe (CP15)
Compatible with ID remote identifiers

Compliant to IEEE 802.3an Standards to support up to 10Gbps
Compliant to 802.3af/at/bt to support PoE/+/++ testing
Compliant to Wi-Fi 802.11a/b/g/n/ac to support Wi-Fi.

Generate graphical PDF reports

The post Certificator : NetXpert XG2 first appeared on ATEVA Technologies.

echocollect -e

Admin admin — Wed, 30 Jun 2021 18:13:34 +0000

The echocollect -e gateway

The Echocollect gateway is a gateway dedicated to the integration of “Process Data” into high-level systems or IoT solutions.

La passerelle echocollect -e est une passerelle multi protocoles fournissant des solutions de management “Process Data”. Elle offre des connexions “temps réel” entre PLC et bases de données, OPC UA et OPC Classic connectivité. Ses fonctionnalités inclues à la fois le log de données locales et une intégration directe de données d’applications Cloud IoT via MQTT

Vous ne connaissez pas l’ echocollect ???

Présentation Echocollect ( PDF )

Général

Integration of Existing Systems in New Quality Assurance Systems

Independent real-time collection of manufacturing, process or quality data directly from programmable logic controllers (PLC) and delivery to higher-level management systems, such as ERP or MES system
Recipe manager functionality for writing data blocks to PLCs
Direct connectivity via SQL database protocols, platform independent OPC UA technology or MQTT Publisher functionality
Support of more than 50 PLC types addressable via Ethernet

Excellent Data and Network Security

Buffering of arriving data and addition of time stamps in case of broken connections, automatic forwarding once connection has been reestablished
Option for parallel data logging on SD card for traceability reasons
Physical network separation between production systems and commercial IT networks
State-of-the-art OPC UA security: Optional encryption of transmitted data and authentication via certificates

Lowered IT Maintenance Costs and Investment Protection

echocollect as standard component, addition of extra functionality without modifying existing systems
No need for additional PC requiring software updates and administration
Working for years once configured – untouched, without updates and with zero maintenance costs
Plug-and-go replacement, if necessary, using configuration stored on SD card
Very easy configuration by straightforward project import without requiring PLC modifications and programming skills

Easy Live Data Visualization

Native web technology for easy and cost-efficient visualization of process, manufacturing and quality data using standard web browser without any plug-ins
No need for OPC Server or complex SCADA system
Scalable, resolution-independent vector graphics for consistent display of data on wide variety of network enabled devices like desktop PCs, laptops, smart phones, tablet PCs or industrial control panels

Details Techniques

Ethernet Addressable Controllers	Siemens SIMATIC S7 and S5, controllers with Modbus TCP (Wago, Beckhoff, Phoenix Contact, Schneider Electric, etc.), Mitsubishi (Melsec-Q), etc.
Ethernet Protocols	TCP/IP, RFC1006 (ISO on TCP), ISO (H1), S5, S7, TCP/IP with PLC header, Modbus TCP, Melsec-Q, raw data
Ethernet Interfaces	2 x independent interfaces TP (RJ45), 10/100 MBit/s
Embedded OPC UA Server	Symbolic Mapping; Browsing, Read, Write, Subscribe; Self-Discovery Service; possible reconfiguration without device restart; possible multiple Client connections, optional read-only PLC connection; OPC UA Security with password or certificates
Embedded MQTT Publisher	Establishment of MQTT Broker connection, optional user authentication and data encryption, easy topic generation from existing symbols, maximum of 1,000 topics, adjustable publishing interval
Supported Databases	MySQL, Oracle, DB2, MS-SQL
Other Protocols	Telnet, SMTP (email notification), OPCpipe (OPC Tunnel)
Supported Engineering Tools for Symbol Import	SIMATIC STEP 7, TIA Portal
Limitation	Maximum of 5 PLC connections, 10,000 items in total Data mapping PLC – database must be structured in 400 tables and 200 items per table
Visualization	atvise webMI visualization, functional level ‘Advanced’ (fully event-driven data exchange) Limited to up to 50 visualized items per echocollect (optional upgrade possible), maximum of 5 simultaneously accessing browsers
Configuration Software	Softing NetCon for device configuration, atvise builder for SCADA project editing, dataFEED Exporter for symbol import
Power Supply	24 VDC, ca. 0,3 A
Ambient Conditions	Operating temperature: 0 °C … 55 °C, storage temperature: -20 °C … 70 °C
Dimensions (HxWxL)	131mm x 47mm x 111mm
Weight	ca. 0,4 kg
Mounting	35 mm DIN Rail
Protection Class	IP20
Certifications	CE

Downloads

Documents

Brochure: echocollect -e

Product brochure for the echocollect -e multi-protocol gateway

Download

Documentation & Software — Download (Cloud Access)

User manuals, configuration software, tutorials and technical documentation for the echocollect -e gateway

Request Download

References

GAL-YY-143101	echocollect e (connectors: 2 x Ethernet, 1 x TTY)
LRA-YY-143001	Upgrade echocollect: License for database access to Oracle, DB2 and MSSQL (default: MySQL only)
LRA-YY-143002	Upgrade echocollect: License enabling data logging on SD Card (default: no data logging)
LRA-YY-143004	Upgrade echocollect: License supporting unlimited number of visualization items (default: maximum of 50 visualization items)
LRA-YY-143005	Upgrade echocollect: License embedded OPC UA Server (default: no embedded OPC UA Server)
LRA-YY-143007	Upgrade echocollect: License MQTT Publisher functionality (default: no MQTT support)
LRA-YY-143115	Upgrade echocollect: License enabling maximum of 15 PLC connections (default: maximum of 5 PLC connections)

Additional Products and Services

700-5596-04	AC Adapter, 24 VDC, Euro, UK, or USA
LRL-DY-131701	OPCpipe client
MEA-YY-144002	CD atvise elements, 4,000 high-quality bitmaps and vector graphics in SVG format
GPL-CS-191000	echolink sS7-compact
110-1000-01	Industrial Ethernet – Troubleshooting in Automation, 3 days

Scope of Delivery

Hardware	Multi-protocol gateway echocollect e, SD card, connector for power supply*
Software	Net configuration software on CD-ROM, also downloadable from Softing website
Documentation	Quick Start leaflet, context-based online help, CD-ROM with product handbook and configuration tutorials, also downloadable from Softing website

Formation

accessoires

Connector Power Pack 24 V DC

Country-specific connector power packs are available. Note: A connector power pack is not included in the delivery of the echocollect. If necessary please order it separately.

Technical Details

100 – 240 V AC, 47 – 63 Hz, sec. 24 V, 1,25A

Order Number

Version EURO, UK, USA
700-5596-04

Wiki

Which cloud platforms are supported?

We support with all Softing gateways (echocollect, uaGate, edgeGate) the Microsoft Azure Cloud, Amazon AWS Cloud, IBM Bluemix Cloud and other cloud providers, which are using MQTT for telemetry data.

What is the size of the Store & Forward queue on the echocollect?

The S&F queue for MQTT is unlimited (except the size of the sd-card). The echo buffers in the ram, and after it collects a bunch of messages, they were copied to the sd-card. To use the S&F feature, QoS 1 or QoS 2 must be used.

Which SD-card sizes are supported?

SD: from 8 MB till 2 GB
SDHC: from 4 GB till 32 GB
(SDXC is not supported)

Which OS is used in the echo devices?

Custom hardened operating system based on Linux Kernel

What happens when the SD-card is full?

When enabled, the oldest data will be rewritten by the latest, in a circular buffer manner.

Which databases are supported by echocollect?

These databases are tested regularly by our QS department for compatibility with echocollect. Other versions might be compatible as well, but they were not fully tested.

Data Base	Version
Oracle	V10 V11 V11.2 XE
DB2	V10.1 V9.5 V9.75
MsSQL	2005
SYBASE	ASE 15_0
MySQL	5.5

Les personnes intéressées par ce produit, peuvent être intéressées par :

The post echocollect -e first appeared on ATEVA Technologies.

pnGate PB

Webmaster — Mon, 14 Jun 2021 17:05:38 +0000

PROFINET to PROFIBUS DP/PA Gateways ( pnGate PB )

Direct integration of PROFIBUS DP and PA segments into a PROFINET control system

Re-use “power confectioners” in a network update project
No intermediate PROFIBUS DP segments.
Prepare for standard integration and Asset Management tools.

Overview

Key Component for Transition to State-of-the-Art Technology

Simple replacement of installed PROFIBUS DP/PA segment coupler
Re-use of existing PROFIBUS segments without requiring modification
Support of PROFINET redundancy for increased reliability

Direct Connectivity to PROFIBUS Segments

Single access point to PROFIBUS DP and PROFIBUS PA segments from PROFINET networks
Acting as PROFINET Device, PROFIBUS PA and PROFIBUS DP Master
Support of one PROFIBUS DP segment and up to two PROFIBUS PA segments

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

Supports major PROFINET engineering tools such as TIA Portal, Step7 and PC WORXS
Included CommDTM allowing use in FDT/DTM frame applications
EDD-based device parametrization using Siemens Simatic PDM

Technical details

Technical Details
Hardware	Processor Status LEDs (Gateway)Status LEDs (Fieldbus)	Altera Cyclone V SoC with dual-core ARM Cortex-A9 PWR (power supply), RUN (operation), ERR (error), CFG (configuration and update) SF (system fault), BF (bus fault)
Interfaces and Connectors	Ethernet PROFIBUS PA PROFIBUS DP-V0 / V1	2 * IEEE 802.3 100BASE-TX / 10BASE-T, embedded PROFINET switch for daisy chain topology Connectors: RJ45 Protocol: PROFINET RT / IRT, Support of PROFINET redundancy protocols RESTful API interface for device configuration 2 * PROFIBUS PA (MBP) segments, Bus-powered Medium Attachment Unit (MAU): Fieldbus voltage range: 9 VDC … 32 VDC, current consumption 10 mA, Connectors: 3-position screw connection, galvanically isolated 1 Segment with RS485 Physical Layer, Connector: 9-pin Sub-D socket
Physical Properties	Dimensions (H x W x D) Weight Power SupplyOperating / Storage Temperature Relative Humidity Cooling Coating Mounting Protection Class	100 mm x 35 mm x 115 mm Approx. 0.25 kg 18 VDC … 32 VDC; SELV/PELV power supply mandatory Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on) No power supply to PROFIBUS PA segments through pnGate PB -40 °C … +70 °C / -40 °C … +85 °C (see detailed mounting description in user manual) 10 % … 95 %, non-condensing Convection, no fan Conformal coating based on ANSI / ISA-S71.04 G3 DIN rail 35 mm IP20

Technical Details

Hardware

Processor
Status LEDs (Gateway)Status LEDs (Fieldbus)

Altera Cyclone V SoC with dual-core ARM Cortex-A9
PWR (power supply), RUN (operation), ERR (error), CFG (configuration and update)
SF (system fault), BF (bus fault)

Interfaces and Connectors

Ethernet

PROFIBUS PA

PROFIBUS DP-V0 / V1

2 * IEEE 802.3 100BASE-TX / 10BASE-T, embedded PROFINET switch for daisy chain topology
Connectors: RJ45
Protocol: PROFINET RT / IRT, Support of PROFINET redundancy protocols
RESTful API interface for device configuration
2 * PROFIBUS PA (MBP) segments,
Bus-powered Medium Attachment Unit (MAU): Fieldbus voltage range: 9 VDC … 32 VDC,
current consumption 10 mA,
Connectors: 3-position screw connection, galvanically isolated
1 Segment with RS485 Physical Layer, Connector: 9-pin Sub-D socket

Physical Properties

Dimensions (H x W x D)
Weight
Power SupplyOperating / Storage Temperature
Relative Humidity
Cooling
Coating
Mounting
Protection Class

100 mm x 35 mm x 115 mm
Approx. 0.25 kg
18 VDC … 32 VDC; SELV/PELV power supply mandatory
Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
No power supply to PROFIBUS PA segments through pnGate PB
-40 °C … +70 °C / -40 °C … +85 °C
(see detailed mounting description in user manual)
10 % … 95 %, non-condensing
Convection, no fan
Conformal coating based on ANSI / ISA-S71.04 G3
DIN rail 35 mm
IP20

Downloads

Documents

Datasheet: pnGate PB

Technical specifications and features.

Download

pnGate PB — Cloud Access

Access to software, firmware, drivers and documentation via our secure cloud.

Drivers & Software

PDM Libraries, PROFIDtm, Search and Configure tool, PACTware, firmware.

Request Download

Documentation

User guide, quick start guide and technical documentation.

Request Download

Other

Additional resources.

Request Download

References

Scope of Delivery
Hardware	pnGate PB Gateway
Software	GSDtoGSDML Converter, FDT CommDTM, PACTware, Drivers and Tools
Documentation	On CD-ROM

Order Numbers
GCA-AN-024608	pnGate PB, PROFINET to PROFIBUS Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).

Additional Products and Services
GCA-AL-024602	pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-AL-024604	pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).
GCA-AL-024605	pnGate PA (for STAHL carrier), PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices). For reversed mounting position on STAHL backplane
GCA-EL-024802	mbGate PA, Modbus/TCP to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-EL-024804	mbGate PA, Modbus/TCP to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).

Video

pnGate : Profinet to Profibus DP/PA

Wiki

A savoir

Sous Firmware v 1.30
  Login : administrator
  Password : FGadmin!1

The post pnGate PB first appeared on ATEVA Technologies.

SNi40 Industrial protection for your data

Webmaster — Wed, 17 Feb 2021 08:21:00 +0000

Solution pour la protection des systèmes industriels

Un produit adapté à vos environnements.
Améliorez votre sécurité grâce à un appareil spécifiquement conçu pour protéger les API (Automates Programmables Industriels).

Renforcez votre cybersécurité globale grâce à une gamme complète d’appareils qui répondent à vos exigences en matière d’OT et de convergence IT/OT (Exemple de protocoles analysé : OPC UA, Réseaux Profinet, Ethernet IP, Modbus TCP, etc..)

La Sécurité ne doit pas être une option

Une protection sans impact sur la production

Détectez et protégez sans aucun impact sur votre activité industrielle. Ce boîtier de sécurité s’intègre facilement aux environnements industriels, grâce à une procédure simple de mise en service.

Intégrez un produit adapté à vos environnements

La gamme de produits de sécurité réseau est disponible selon vos besoins : dans un format Hardware IT pour la protection du réseau informatique ou dans un format Hardware OT avec le Stormshield SNi40, boîtier conçu spécialement pour la protection des PLC (Programmable Logic Controller).

Une administration unique

Avec la solution globale Stormshield Network Security, vous intégrez un seul produit logiciel pour une administration unique quel que soit le domaine d’activité (OT ou IT).

Overview

Le Firewall est certifié CSPN (Certification de Sécurité de Premier Niveau) par l’ANSSI et répond donc aux éxigences de la réglementation Français ‘LPM) sur la qualification des équipements de détection et protection des Systèmes d’information d’importace vital (SIIV)

L’inspection de paquet ou DPI (Deep Packet Inspection) sur les protocoles industriels. Très peu de solution de sécurité informatique pour l’industrie le propose pour les protocoles industriels. Cette technologie vous permet de vous assurer de la qualité, l’intégrité et la sécurité des paquets réseaux qui sont transportés sur votre réseau industriel

Technical details

PERFORMANCE

Type	Firewall industriel ou Pare-feu industriel
Certification	CSPN
Débit du Firewall en UDP	4.8Gbps
Débit du Firewall en IMIX	2.4Gbps
Débit en IPS	Jusqu’à 2.9Gbps
Latence max	10ms
VPN	Oui IPSec – AES128/SHA1 : 1,1 Gbps
Nombre de Tunnels simultanés	500
Nombre de tunnels SSL simultanés	75 (via Web)
Nom de tunnels SSL simultanés	100 via client
Nombre de sessions simultanées	500 000
Nombre de nouvelles sessions par seconde	20 000
Interface	10/100/1000
Nombre d’interfaces	5
Nombres d’intefaces SFP	de 0 à 2
Port série	1
Ports USB	1 x USB 2.0 et 1 x USB 3.0
DPI	Deep Packet Inspection ou Inspection des paquets en profondeur OUI
Protocoles compatibles DPI	Modbus, UMAS, S7 200-300-400, EtherNet/IP, CIP, OPC UA, CEI 60870-5-104, OPC (DA/HDA/AE), BACnet/IP et IT
Stockage	32Gb
Journal	sur SSD
MTBF	26.6 ans
Montage ou installation	Rail-Din
Dimensions	165 x 80 x 145 mm
Poids	1.4 kg
Consommation typique	15.5W
Consommation max	19.5W
Température de fonctionnement	-40 °C à +75 °C
Protection	IP30
Modèle	SNI40