PROFIBUS eng | ATEVA Technologies https://www.atevatech.net Votre partenaire en réseaux industriels Wed, 18 Mar 2026 14:01:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://www.atevatech.net/wp-content/uploads/2021/03/cropped-cropped-ATV_logo_web-32x32.png PROFIBUS eng | ATEVA Technologies https://www.atevatech.net 32 32 SmartLink HW PN https://www.atevatech.net/produit/smartlink-hw-pn/?utm_source=rss&utm_medium=rss&utm_campaign=smartlink-hw-pn Wed, 10 Sep 2025 10:50:36 +0000 https://www.atevatech.net/?post_type=product&p=40024 smartLink HW-PN provides access to PROFINET networks. By integrating standardized technologies like a FDI communication server (OPC UA), it provides transparent access to all connected devices.

The post SmartLink HW PN first appeared on ATEVA Technologies.]]>

SmartLink HW PN

smartLink HW PN

PROFINET Gateway for Asset Management

Access PROFINET networks via FDI and OPC UA

smartLink HW-PN provides access to PROFINET networks. By integrating standardized technologies like a FDI communication server (OPC UA), it provides transparent access to all connected devices.

smartLink HW-PN can be used for asset management, device configuration and monitoring.

Asset Management and Parameterization of PROFINET Devices

Parameterization and Asset Management
  • Secure, standardized access to devices
  • Parallel to and independent of the controller
Compatible with established communication standards
  • Implements the standard FDI communication server interface based on OPC UA

Asset Management and Parameterization of PROFIBUS Devices

Parameterization and Asset Management
  • Secure, standardized access to devices
  • Parallel to and independent of the controller
Inexpensive and low-risk Integration
  • Connection of PROFIBUS devices without additional hardware
  • Use of existing infrastructure using the PROFINET/PROFIBUS proxy standard for connecting to the PROFIBUS devices
Compatible with established communication standards
  • Implements the standard FDI communication server interface based on OPC UA

Overview

Parameterization and Asset Management

  • Independent of PROFINET engineering tools
  • Centralized and time-saving asset management of PROFINET networks with PROFINET and PROFIBUS field devices directly from the control room

Ethernet Access Point to PROFINET networks

  • Provides 2nd channel to access the field devices
  • Acts as a PROFINET supervisor
  • Is part of one PROFINET network
  • Integrated 2-port switch for use in line or ring network topologies

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFINET networks without requiring modification
  • Access to acyclic data via FDI communication server (OPC UA)

Technical Data

smartLink HW-PN
Hardware Processor Altera Cyclone V SoC with dual-core ARM Cortex-A9
Status LEDs (Gateway) PWR, RUN, ERR, BUS
Real-Time Clock Real-Time clock with buffering, setting the time via browser or by NTP server
(buffer time depends on conditions such as ambient temperature and duration of use)
Interfaces Ethernet 1 x IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T, Connector: RJ45
PROFINET 2 x IEEE802.3 10BASE-T/100BASE-TX, Connector: RJ45; Embedded PROFINET 2-port switch for line or ring topology
Protocol: PROFINET RT / IRT, Support of PROFINET redundancy protocols
Supported Communication Protocols PROFINET, PROFIBUS
PROFINET/PROFIBUS Proxies Softing:
pnGate DP, pnGate PA
aplSwitch Field PA
Physical Properties Dimensions (H x W x D) 120 mm x 28 mm x 110 mm
Weight Approx. 430g
Power Supply 18 VDC … 32 VDC; SELV/PELV power supply mandatory
Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
Typical Power Loss 5 W
Operating Temperature -40 °C … +65 °C (see detailed mounting description in user manual)
Storage Temperature -40 °C … +85 °C
Relative Humidity 10 % … 95 %, non-condensing
Cooling Convection, no fan
Mounting DIN rail 35 mm
Protection Class IP20
Conformity / Standards CE Electromagnetic compatibility (EMC) and Restriction of Hazardous Substances (RoHS)
EN 61000-6-2 Generic standards – Immunity standard for industrial environments
EN 61000-6-4 Generic standards – Emission standard for industrial environments
EN 55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements Class A
EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics –
Limits and methods of measurement Class A
EN 50581:2012/EN IEC 63000:2018 RoHS, Assessment to the restriction of hazardous substances
FCC FCC 47 CFR Part 15B Section 15.109 (Class A)
VCCI VCCI Voluntary Control Council for Interferences by Information Technology Equipment, April 2015

References

Scope of Delivery
Hardware smartLink HW-PN
Documentation User Guide as PDF download

 

Order Numbers
GEA-YA-026010 smartLink HW-PN
LRA-AA-027003 smartPlus PN, License access to one field device
The post SmartLink HW PN first appeared on ATEVA Technologies.]]> SPI 3 – Serial Device to Profibus https://www.atevatech.net/produit/spi3-serial-device-to-profibus/?utm_source=rss&utm_medium=rss&utm_campaign=spi3-serial-device-to-profibus Mon, 28 Oct 2024 09:44:09 +0000 https://www.atevatech.net/?post_type=product&p=37919 SPI 3 - Serial PROFIBUS Interface The post SPI 3 – Serial Device to Profibus first appeared on ATEVA Technologies.]]>

SPI 3 – Serial PROFIBUS Interface

SPI3-RS232

SPI 3 – Serial PROFIBUS Interface

Connecting Serial Devices to PROFIBUS Networks

By using the SPI 3, devices with serial interface are integrated in PROFIBUS as DP slaves. Depending on the application, various protocols and physical interfaces are available. In decentralized PROFIBUS installations, the SPI 3 replaces the serial interface inside the PLC. The SPI 3 is configured via the respective PROFIBUS DP master by means of the SPI 3 GSE file. The PROFIBUS IO range can be flexibly configured. The SPI 3 is suitable for simple applications, such as connecting text displays or barcode scanners, as well as for more complex applications such as the integration of identification systems, scales, controllers and laboratory equipment.

Overview

  • Integration of devices with serial interface as DP slave devices in PROFIBUS networks
  • Available for various protocols and physical Interfaces

Functions

  • DP slave with transmission rate of 9.6 kbit/s up to 12 Mbit/s
  • Serial transmission rate of 110 bit/s up to 57.6 kbit/s (depending on the protocol)
  • Serial interface available as RS 232, RS 422 or RS 485
  • Configuration with GSD file via the PROFIBUS DP master

Downloads

Documents

Datasheet: SPI 3

Serial Device to Profibus converter specifications.

Download

SPI 3 — Cloud Access

Access to software, documentation and GSD files via our secure cloud.

Drivers & Software

Doku Media Kits (ASCII, MODBUS, Sartocheck), GSD files.

Request Download

Documentation

Installation guide, release notes.

Request Download

Other

Additional resources.

Request Download

References

Order Information

Scope of Delivery
Hardware SPI 3
Documentation On Website
Order Numbers
GPA-NS-011236 SPI 3 RS 232
GPA-NS-011237 SPI 3 RS 422
GPA-NS-011238 SPI 3 RS 485
The post SPI 3 – Serial Device to Profibus first appeared on ATEVA Technologies.]]> NETLink Pro Compact https://www.atevatech.net/produit/netlink-pro-compact/?utm_source=rss&utm_medium=rss&utm_campaign=netlink-pro-compact Fri, 28 Jun 2024 08:06:37 +0000 https://www.atevatech.net/?post_type=product&p=37265 NEtlink Pro Compact USB Hardware interace gateway : MPI / Ethernet (RFC1006 )

 

The post NETLink Pro Compact first appeared on ATEVA Technologies.]]>

NETLink® PRO Compact

NEtlink Pro

Netlink Pro compact

The devices of the NETLink family serve the purpose of programming, configuring, and visualizing S7 PLCs.

  • RFC 1006 (ISO on TCP)
  • CPU-to-CPU communication (with S7-300* and S7-400*)
  • Support for all common S7 engineering tools
  • Dynamic address assignment using DHCP
  • Security functions for securing TCP/IP access
  • Switchable PLC write protection
  • Up to 16 TCP connections
  • Up to 32 MPI/PROFIBUS connections
  • Easy configuration via web interface
  • Variables can be monitored in a browser window
  • Support for slave configuration
  • Electrical isolation for MPI/PPI/PROFIBUS
  • MPI/PPI/PROFIBUS from 9.6 kbps to 12 Mbps
  • For S7-200*, S7-300*, S7-400*
  • Power can be supplied by the CPU or, alternatively, by an external DC 24 V supply

Overview

NETLink® PRO Compact

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices.
The integrated web interface offers parameterization, diagnostic, and security features, and for functional enhancements, the user can use our free diagnostic software SHTools to, for example, automatically perform firmware updates. The latest version is available for download.

The NETLink PRO Compact is a communications processor in the plug format for programming, visualization, and remote maintenance. It combines flexibility and a compact design. Power is supplied to the NETL ink® either through the CPU of the automation device or externally with DC 24 V as an option. The network connection can be used with any standard Cat-5 cable, making cable lengths up to 100 meters feasible without additional components.

Technical Data

NETLink® PRO Compact

General information

  • Order number700-884-MPI21
  • Article nameNETLink PRO Compact
  • Dimensions (DxWxH)40 x 17 x 64 mm
  • WeightApprox. 110 g
  • Supported operating systemsNo limitation (driver for SIMATIC NETLink-S7-NET only Windows XP/2003R2/7/2008R2/8.1/2012 R2/10)

Communication interface

  • Number1
  • Type10 Base-T/100 Base-TX
  • Auto MDI/MDIX
  • ProtocolFDL,RFC 1006
  • ConnectionRJ45
  • Transmission rate10/100 Mbps autom. detection

MPI/PPI/PROFIBUS interface

  • Number1
  • TypeRS485, isolated
  • ConnectionSUB-D male connector, 9-pin. with PG interface and repeater
  • Transmission ratemax. 12 Mbps autom. detection

Status indicator

  • LED5 LEDs, 2 of them bi-color

Power supply

  • Voltage supply24 V DC, 18–30 V DC
  • Current drawmax. 200 mA at DC 24 V

Ambient conditions

  • Ambient temperature0 °C … +60°C
  • Transport and storage temperature-20 °C … +80 °C
  • Relative air humidity95 % r H without condensation
  • Pollution degree2
  • Protection ratingIP20
  • ApprovalsCE

Downloads

NETLink Pro Compact — Cloud Access

Access to all downloads from our secure cloud.

Drivers & Software

Software and drivers.

Request Download

Documentation

User manual and technical documentation.

Request Download

Other

Additional resources.

Request Download

Why Choose the NETLink PRO Compact for Your S7 PLC Network?

The HELMHOLZ NETLink PRO Compact (700-884-MPI21) is the ideal MPI/PROFIBUS to Ethernet gateway for industrial automation engineers who need reliable remote access to Siemens S7 PLCs. Whether you are programming an S7-200, configuring an S7-300, or visualizing an S7-400, this compact communications processor provides seamless connectivity through the industry-standard RFC1006 protocol.

With support for up to 16 simultaneous TCP connections and 32 MPI/PROFIBUS connections, the NETLink PRO Compact is engineered for demanding industrial environments. Its electrical isolation protects your equipment, while the integrated web interface simplifies configuration and diagnostics. The device supports transmission rates from 9.6 kbps up to 12 Mbps with automatic detection, ensuring optimal performance across all bus speeds.

Frequently Asked Questions

What PLCs are compatible with the NETLink PRO Compact?

The NETLink PRO Compact is compatible with Siemens S7-200, S7-300, and S7-400 programmable logic controllers via MPI, PPI, and PROFIBUS interfaces.

What protocol does the NETLink PRO Compact use?

It uses RFC 1006 (ISO on TCP) for Ethernet communication and supports FDL protocol for fieldbus communication, enabling CPU-to-CPU data exchange.

Can I power the NETLink PRO Compact from the PLC?

Yes, the device can be powered directly from the CPU of your automation device or externally with a 24V DC power supply (18-30V DC range).

The post NETLink Pro Compact first appeared on ATEVA Technologies.]]> PB-PRO1-PCI https://www.atevatech.net/produit/pb-pro1-pci/?utm_source=rss&utm_medium=rss&utm_campaign=pb-pro1-pci Mon, 23 Oct 2023 13:54:13 +0000 https://www.atevatech.net/?post_type=product&p=36165

PB-PRO1-PCI : Profibus card, PCI format

PB-PRO1-PCI : Profibus Card

Single and dual channel interface boards in universal PCI format for integrating PCs into PROFIBUS architectures as machine controllers, supervisory control applications, field devices or operator panels.

Overview

Always the Fitting PROFIBUS Protocol

  • PROFIBUS Master and Slave functionality
  • Support of PROFIBUS DP, PROFIBUS FMS and PROFIBUS FDL protocols
  • Universal interface solution for integration in industrial and embedded PCs

Rapid Integration

  • Direct access to all protocols via PROFIBUS API
  • Sample programs including comments
  • Integration in various plant asset management tools

Large Choice of Drivers

  • Use in Windows and Linux operating systems
  • PROFIBUS CommDTM for FDT applications included in scope of delivery

Downloads

Documents

Datasheet: PB-PRO1-PCI

Technical specifications and features.

Download

References

Scope of Delivery
Hardware PC interface board
Software Download (see below): Drivers, sample programs
Documentation Download (see below)

Misc

PB-PRO1-PCI Master/Slave, Single Channel
PB-PRO1-PCI/LP Master/Slave, Single Channel, Low Profile
PB-PRO1S-PCI Slave, Single Channel
PB-PRO1S-PCI/LP Slave, Single Channel, Low Profile
PB-PRO2-PCI Master/Slave, Dual Channel
The post PB-PRO1-PCI first appeared on ATEVA Technologies.]]> mbGatePB https://www.atevatech.net/produit/modbus-tcp-profibus-pb-gateway/?utm_source=rss&utm_medium=rss&utm_campaign=modbus-tcp-profibus-pb-gateway Sat, 29 Jul 2023 12:16:25 +0000 https://www.atevatech.net/?post_type=product&p=35577 mbGate PB : Modbus TCP /Profibus PB gateway

  • 1 Profibus DP segment
  • 2 Profibus PA segment

Weight: 0.300 kg
HS Code: 85176200

The post mbGatePB first appeared on ATEVA Technologies.]]>

MODBUS TCP SERVER to PROFIBUS PB  (PA/DP) Master Gateway

Simple connection of PROFIBUS Slave Devices to Modbus Control Systems via Internal I/O Mapping

With mbGate PB it is possible to integrate up to 2 PROFIBUS PA segments and 1 PROFIBUS DP segment into Modbus TCP control systems. It acts as Modbus TCP Server and PROFIBUS Master. With our gateway the engineering costs can be reduced since it re-uses existing power conditioners in technology upgrade projects. It enables configuration, parameterization and plant asset management using standard industry tools.

Overview

mbGate PB Gateway : Key Component for Transition to State-of-the-Art Technology

  • Simple replacement of installed PROFIBUS DP/PA segment couplers
  • Re-use of existing PROFIBUS segments without requiring modification

Direct Connectivity to PROFIBUS Segments

  • Single access point to PROFIBUS DP and PROFIBUS PA segments from Modbus TCP networks
  • Acting as Modbus TCP Server and PROFIBUS PA and PROFIBUS DP Master
  • Support of one PROFIBUS DP segment and up to two PROFIBUS PA segments
  • Support of up to 64 PROFIBUS devices

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Supports major Modbus engineering tools such as Schneider Unity Pro or Siemens TIA Portal
  • Included CommDTM allowing use in FDT/DTM frame applications
  • EDD-based device parametrization using Siemens Simatic PDM

MODBUS/TCP Redundancy

  • Supports the use of two redundant PLCs and two redundant gateways
  • Easily enabled via licensing
  • Full control of redundant operation mode via engineering and PLC

Downloads

Documents

Datasheet: mbGate PB

Technical specifications and features.

Download

mbGate PB — Cloud Access

Access to firmware, drivers and documentation via our secure cloud.

Drivers & Software

Firmware, PROFIdtm, Search and Configure tool, PDM Libraries, PACTware.

Request Download

Documentation

Modbus Gateways User Guide, samples.

Request Download

Other

Additional resources.

Request Download

Reference

Scope of Delivery
Hardware mbGate PB Gateway
Documentation On Website
Order Numbers
GCA-EN-024808 mbGate PB, Modbus TCP to PROFIBUS Gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
Additional Products and Services
LRA-EN-024851 gatePlus HighAvailability, License for activating redundancy features in mbGate PB
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-EL-024802 mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 2 PA segments (up to 32 PA devices).
GCA-EL-024804 mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 4 PA segments (up to 64 PA devices).
GCA-EN-024806 mbGate DP, Modbus TCP to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

Vidéo

Video Channel : Retrouvez nous sur notre page channel YOUTUBE

The post mbGatePB first appeared on ATEVA Technologies.]]> Echolink S7 Compact: the adaptator for S7 Communication https://www.atevatech.net/produit/echolink-s7-compact/?utm_source=rss&utm_medium=rss&utm_campaign=echolink-s7-compact Wed, 19 Jul 2023 07:56:51 +0000 https://www.atevatech.net/?post_type=product&p=35412 Echolink S7 Compact : Compact Profibus/ MPI Adapator,Gateway to access any Simens S7 PLC for programming, configuration. Give an Ethernet connection to your PLC

The post Echolink S7 Compact: the adaptator for S7 Communication first appeared on ATEVA Technologies.]]>

Echolink S7 Compact

Echolink S7 Compact  :

  • Echolink S7 Compact is an adapter for Communication with Siemens S7 Controllers
  • Integration of S7-200, S7-300 and S7-400 into Ethernet Architectures
  • PLC Programming and Communication via Interface
  • Integration into Product Management and Visualization Applications echolink S7compact
  • Integration of S7-200, S7-300 and S7-400 into 10/100 Mbit Ethernet Networks
  • Direct communication with one or several controllers in any kind of TCP network structure
  • Support of up to 16 simultaneous connections
  • Use of standard TCP/IP for communication within plant or company networks and with the Internet
  • Expansion of participants using MPI or PROFIBUS via pass-through PG port Interference-free integration into existing control systems
  • Centralized configuration of all adapters in the network via PC
  • Power supply directly from controller or via external power supply

Integration of S7-200, S7-300 and S7-400 into Ethernet Architecture

PLC Programming and Communication via Interface

Integration into Product Management and Visualization Applications

Overview

With the Echolink S7 Compact, you can integrate  S7-200, S7-300 and S7-400 via 10/100 Mbit Ethernet networks

  • Direct communication with one or more controllers over any TCP fabric
    Supports up to 16 simultaneous connections
  • Use standard TCP/IP for communication within the plant or company network and with the Internet
  • Extended communication using MPI or PROFIBUS ports via PG port.
  • interference-free integration into an existing control system
  • Central configuration of all adapters on the network via NetCon S7 software
  • Power supply directly from controller or via external power supply
  • Cost-effective solution alternative

Programming Adapter Supporting all Relevant S7 Engineering Tools

  • Interface for programming controllers via Ethernet
  • Compatibility with STEP7, TIA-Portal, WinCC and WinCC flexible
  • Display and configuration of the adapter in STEP7 or TIA portal

Application Integration through RFC1006 and OPC UA

  • Connection to HMI station and PLC directly via RFC1006 Ethernet protocol
  • Support of OPC and OPC UA by using dataFEED OPC Suite for integration into higher-level systems, e.g. for production management

Technical Data

Hardware Requirements Ethernet Interface
PC Connection RJ45
Supported Controllers Siemens S7-200, Siemens S7-300, Siemens S7-400
Supported Bus Systems PROFIBUS, MPI
Communication Type Ethernet 100 BASE-TX/10 BASE-T
Supported Transfer Rates to PLC 9.6 KBit/s … 12 MBit/s with automatic detection
Supported Transfer Rates to PC 10 / 100 MBit/s
Simultaneous Connections 16 TCP/IP, 32 MPI / PROFIBUS Connections
Power Supply 24V ± 25%, external or from Controller
Galvanic Isolation Yes
Temperature Range 0°C … +55°C
Housing, Dimensions (W x H x D) 40,6 mm x 16,7 mm x 74,3 mm
Weight Approximately 40g
Approvals CE
Protection Class IP20
Configuration Software NetCon S7 for Local and Remote Configuration
Supported Application Software Siemens TIA Portal V11-V13, Siemens STEP 7 V5.5, Siemens WinCC, Siemens WinCC flexible, Siemens ProTool
System Requirements PC/PG with Windows XP, Windows 7, Windows 8, Windows 10, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012

Downloads

Documents

Datasheet: Echolink S7 Compact

Technical specifications.

Download

User Manual

Getting started guide.

Download

References

ATV-GPL-CS-191000 echolink S7-compact

Scope of Delivery

Hardware echolink S7-compact
Software Configuration Software NetCon S7 on CD-ROM (also downloadable from Softing website)
Documentation Product handbook and configuration tutorials on CD-ROM (also downloadable from Softing website)

Additional Products and Services

ATV-LRL-DY-134501 dataFEED OPC Suite
ATV-LRL-DY-132101 dataFEED OPC Server Siemens
ATV-GAA-DX-145111 uaGate SI
ATV-GAL-YY-143101 echocollect e (and other echocollect variants)
110-1000-01 Training “Industrial Ethernet – Troubleshooting in Automation“, 3 days
The post Echolink S7 Compact: the adaptator for S7 Communication first appeared on ATEVA Technologies.]]> dataFEED OPC Suite https://www.atevatech.net/produit/datafeed-opc-suite-2/?utm_source=rss&utm_medium=rss&utm_campaign=datafeed-opc-suite-2 Mon, 17 Jul 2023 15:26:41 +0000 https://www.atevatech.net/?post_type=product&p=35407 Extended: All-in-one Data Integration Solution for OPC UA Communication as well as Big Data and IoT Cloud Connectivity, including Store And forward

The post dataFEED OPC Suite first appeared on ATEVA Technologies.]]>

Overview

dataFEED OPC Suite for a Simple and independent access to controllers and IoT devices

  • Read and write access to data in controllers from leading manufacturers
  • Use without modifiying control program
  • Easy integration of existing and new controllers into Industry 4.0 solutions
  • Integration of non-OPC UA-capable components, such as Siemens S7 controllers, into OPC UA solutions
  • Cost savings through further use of already existing OPC Classic components
  • Gateway functionality for connecting controllers and components with integrated OPC UA Server to OPC Classic applications
  • Direct connection of IoT devices (MQTT Publisher) without using an MQTT Broker

Gateway to Big Data and IoT Clouds Solutions

  • Integration of automation devices via MQTT Publisher, MindConnect and REST Client functionality in IoT cloud applications, e.g. Siemens MindSphere, Amazon AWS or Microsoft Azure
  • Easy integration of production data into NoSQL Big Data storage solutions such as MongoDB
  • State-of-the-art security by SSL/TLS support, including certificates

Easy Configuration

  • Modern, intuitive graphical user interface for fast OPC communication configuration
  • Use of smart hands-on defaults, setup wizards and drag-and-drop support
  • Time savings through effective and efficient configuration of distrubuted automation systems with many OPC UA and OPC Classic Servers

Technical details

Supported dataFEED Features OPC UA Server and Client, OPC Classic Server and Client, OPC Tunnel, MQTT, MindSphere and REST Connector,
Database Access (SQL/NoSQL), File Access, Data Exchange (in any direction between OPC UA and OPC Classic Servers or controllers), Filter, Optimizer, Concentrator, Bridge, Local Items (in any direction between OPC UA and OPC Classic Clients)
Supported Controllers Siemens SIMATIC S5, SIMATIC S7 (S7-200, S7-300, S7-400, S7-1200, S7-1500, including optimized blocks), LOGO! 8, PAC Counter and Siemens-compatible controllers like VIPA controllers
Rockwell SLC-500, PLC-5, ControlLogix and CompactLogix
Mitsubishi Melsec-Q Series with Ethernet interface card
B&R controllers with Ethernet interface
Modbus TCP-compatible controllers (Wago, Beckhoff, Phoenix, Schneider, etc.)
All controllers and devices with integrated OPC UA Server
Accessible Controller Data Inputs, outputs, data blocks, markers, timers, counters
Supported IoT Devices All devices with integrated MQTT Publisher
Supported OPC Specifications OPC Classic Data Access V1.0a, V2.05, V3.0, OPC Classic XML-DA V1.01,
OPC Alarms & Events V1.10, OPC Unified Architecture V1.02
Supported OPC UAFunctionality Data Access profile

TCP transport protocol using OPC UA binary coding

Security Methods: Basic256SSha256, Basic256

Authentication by user names and passwords including user certificate
Supported OPC Data Types VARIANT Data Types I1, UI1, I2, UI2, I4, UI4, R4, DATE, BSTR, BOOL and arrays (VT_Array) of these data types
Protocols for IoT Cloud Link MQTT Publisher:
MQTT Publisher V3.1.1, V3.1
QoS, Retain, Last Will and Testament
Security SSL/TLS including certificatesMindConnect:
HTTPS
Methoda: POST
Security: SSL including certificates, authentication via Shared Secret or RSAREST Client:
TCP, HTTP, HTTPS
Methods: PUT, POST
Security SSL and user authentification including certificates
Supported Databases NoSQL databases, e.g. MongoDB, CouchDB
ODBC enabled databases, for example, Oracle, MySQL, Microsoft SQL Server, IBM DB2,
other NoSQL- and ODBC-enabled databases upon inquiry
Operation Mode Application (OutProc Server), Windows Service
Logging, Diagnostics Logging of OPC Calls and Notifications, OPC Data, OPC Tunnel frames, text file access, database access, configurable via integrated web server diagnostic interface
Supported Operating Systems Windows 7, Windows 8, Windows 8.1, Windows Embedded 8.1 Industry, Windows 10, Windows 10 IoT Enterprise,
Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012,Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Licensing Runtime license per computer
Demo Version Full dataFEED OPC Suite, time limited to 72 hours – ( Limitation : 10 servers connections / 250 data items )

Downloads

Documents

Fiche technique : dataFEED OPC Suite (Licence étendue)

Spécifications techniques et fonctionnalités de la dataFEED OPC Suite.

Télécharger

Release Notes : dataFEED OPC Suite

Dernières modifications, corrections et nouvelles fonctionnalités.

Télécharger

dataFEED OPC Suite — Accès Cloud

Accès aux logiciels, version d’essai, manuels et documentation via notre cloud sécurisé.

Pilotes & Logiciels

dataFEED OPC Suite — Essai (72h) & Version complète v5.xx, dataFEED Exporter (Freeware).

Demander le téléchargement

Documentation

Manuel utilisateur dataFEED OPC Suite (Anglais), dernière révision complète.

Demander le téléchargement

Autre

Outil d’import de symboles pour projets Siemens STEP 7 et TIA-Portal, ressources complémentaires.

Demander le téléchargement

References

LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, OPC UA support, access of any number of OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and dataFEED OPC Tunnel Servers plus additional functionality like Database Access, File Access, Data Exchange, Optimizer, Concentrator and Bridge
HUA-DD-130001 USB Hardware Key for dataFEED OPC Suite, Version V4.01 and higher, replacing the standard Software Key

Scope of Delivery

Software dataFEED OPC Suite on CD-ROM
Documentation Manual in PDF format and Online Help in English and German

Additional Products and Services

100-1030-01 Training “OPC Server and Client in Practice”
GAA-DX-145111 dataFEED uaGate SI
GPL-CS-191000 echolink S7-compact

Options

dataFEED OPC UA

dataFEED OPC Server Siemens Serveur OPC Classic ( Option : Serveur OPC UA ) pour accès facile et rapide aux process et données de diagnostiques sur les PLC Siemens : S5, S7-200, S7-300, S7-400, S7-1200 et S7-150 ainsi que les controleurs compatible Siemens
dataFEED OPC Server B&R Serveur OPC Classic ( Option : Serveur OPC UA ) pour l’accès facile et rapide aux process et données de diagnostique sur contrôleurs B&R
dataFEED OPC Server Modbus OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in controllers providing a Modbus TCP interface, e.g. controllers from Wago, Schneider Electric or Phoenix Contact
dataFEED OPC Server Rockwell OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in Rockwell (Allen-Bradley) CLX, SLC and PLC-5 controllers
dataFEED OPC Server Mitsubishi OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in Mitsubishi Melsec-Q controllers

EXTENDED FUNCTIONALITY

dataFEED OPC Tunnel OPC Tunnel for avoiding DCOM communication problems when using OPC Classic for communication between PCs
dataFEED REST Connector REST connectivity for data integration for IoT cloud solutions, support for OPC Classic and OPC UA (optional)
dataFEED MQTT Connector MQTT Publisher functionality for easy and efficient integration of production environments and its data in IoT (internet of Things) and Industrie 4.0* solutions
dataFEED OPC Organizer UA
 OPC UA support for implementing Industrie 4.0. Allows using OPC UA (UA) for data exchange within an OPC Classic environment
dataFEED OPC Data Handler Data Handler extension for simple data exchange between controllers and OPC Servers as well as for storing process data in databases and files
dataFEED OPC Organizer Classic OPC Classic Client and OPC Classic Server, for extended OPC Classic communication functionality

Wiki

For the use of MySQL database, you would need :

You can test you OPC Classical DA with our testing solution

The post dataFEED OPC Suite first appeared on ATEVA Technologies.]]> epGateDP https://www.atevatech.net/produit/epgatedp-2/?utm_source=rss&utm_medium=rss&utm_campaign=epgatedp-2 Thu, 13 Apr 2023 13:15:47 +0000 https://www.atevatech.net/?post_type=product&p=34677 Ethernet IP Gateway

The post epGateDP first appeared on ATEVA Technologies.]]>

Ethernet/IP to PROFIBUS DP Master Gateway

Simple connection of PROFIBUS DP Slave Devices to Ethernet/IP Control Systems via Internal I/O Mapping

With epGate DP it is possible to integrate one PROFIBUS DP segment into Ethernet/IP control systems. With epGate DP the engineering costs can be reduced since it re-uses existing PROFIBUS DP segment without the requiring modification. It enables configuration, parameterization and plant asset management using standard industry tools.

Similar Solutions
epGate PA: Integrate up to 4 PROFIBUS PA segments into ethernet/IP systems
epGate PB: Integrate up to 2 PROFIBUS PA segments & 1 PROFIBUS DP segment into ethernet/IP systems
epGate PN: Integrate PROFINET I/O devices into ethernet/IP systems

Overview

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Supports major EtherNet/IP engineering tools such as Studio 5000 and AMS Device Manager
  • Included CommDTM allowing use in FDT/DTM frame applications
  • EDD-based device parametrization using Siemens Simatic PDM

Direct Connectivity to PROFIBUS Segments

  • Single access point to PROFIBUS DP segment from EtherNet/IP networks
  • Acting as EtherNet/IP device (adapter) and PROFIBUS DP master
  • Support of one PROFIBUS DP segment
  • Support of up to 32 PROFIBUS devices

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFIBUS segments without requiring modification
  • Support of common control systems e.g. Emerson DetlaV or Rockwell Control Logix
  • Support of DLR for redundant communication in the ring with EtherNet/IP

Simple Integration Through Add-On Instructions

  • Data access of PLC program to PROFIBUS devices without requiring detailed PROFIBUS knowledge
  • Mapping between the two protocols generated by provided tools
  • Use of Add-On Instructions (AOI) containing detailed PROFIBUS data type definitions
  • Transparent communication overcoming protocol differences
  • Optimized for usage with Allen Bradley controllers

Downloads

Documents

Datasheet: epGate DP

Technical specifications and features.

Download

epGate DP — Cloud Access

Access to firmware, drivers and documentation via our secure cloud.

Drivers & Software

Firmware, Universal PROFIBUS Driver, PROFIdtm, PDM Libraries, Discovery Tool.

Request Download

Documentation

epGate PA/PB/DP User Guide and technical documentation.

Request Download

Other

Additional resources.

Request Download

References

Scope of Delivery
Hardware epGate DP Gateway
Documentation On Website

 

Order Numbers
GCA-CN-024706 epGate DP, EtherNet/IP to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

 

Additional Products and Services
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-CN-024708 epGate PB, EtherNet/IP to PROFIBUS Gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
GCA-CL-024702 epGate PA, EtherNet/IP to PROFIBUS PA Gateway. Supports up to 2 PA segments (up to 32 PA devices).
GCA-CL-024704 epGate PA, EtherNet/IP to PROFIBUS PA Gateway. Supports up to 4 PA segments (up to 64 PA devices).
The post epGateDP first appeared on ATEVA Technologies.]]> PROFIBUS compact repeater https://www.atevatech.net/produit/profibus-compact-repeater/?utm_source=rss&utm_medium=rss&utm_campaign=profibus-compact-repeater Thu, 13 Apr 2023 07:41:08 +0000 https://www.atevatech.net/?post_type=product&p=34671

Titre 2 – accroche commerciale (avec mot clé à référencer)

Descriptif produit

Rédiger un descriptif produit intégrant le mot ou groupe de mots-clés à référencer d’au minimum 50 mots. Le mot-clé ou le groupe de mot-clés devrat être répété au moins 2 ou 3 fois dans ce paragraphe.
Les photos disposées à gauche sont au format 4/3 de préférence, il est possible d’en changer le format en indiquant la résolution. Il est très important de préciser un nom de fichier compréhensible par google (mot clé) et de le répéter dans l’attribut “alt”.

Downloads

Documents

Brief instruction: PROFIBUS Compact Repeater

Installation and setup guide.

Download

EG Declaration of Conformity

Regulatory compliance document.

Download

The post PROFIBUS compact repeater first appeared on ATEVA Technologies.]]> Wireless PROFIBUS – DATAEAGLE 3712A https://www.atevatech.net/produit/dataeagle-3712a/?utm_source=rss&utm_medium=rss&utm_campaign=dataeagle-3712a Wed, 12 Apr 2023 08:43:15 +0000 https://www.atevatech.net/?post_type=product&p=34641 The DATAEAGLE Compact 3712A radio system was particularly developed for transparent data transmission of PROFIBUS DP and PROFIsafe via Bluetooth. The patented technology guarantees a highly reliable radio connection without radio disturbances and prevents plant downtimes.

The post Wireless PROFIBUS – DATAEAGLE 3712A first appeared on ATEVA Technologies.]]>

DATAEAGLE COMPACT 3712A / 3732A – PROFIBUS on WIRELESS

DATAEAGLE COMPACT 3712A / 3732A

 

The DATAEAGLE Compact 3712A radio system was particularly developed for transparent data transmission of PROFIBUS DP and PROFIsafe via Bluetooth. The patented technology guarantees a highly reliable radio connection without radio disturbances and prevents plant downtimes.

  • Optimized for PROFIsafe via PROFIBUS DP
  • Plug and Play – no device configuration necessary
  • Range up to 1 km with line of sight

The use of advanced Bluetooth 5 wireless technology in the DATAEAGLE Compact 3732 enables the highest speed and latency requirements. This makes the DATAEAGLE 3732 particularly suitable for high-performance safety applications.

Overview

The most widely used application for Bluetooth up to now was and is the connection to
smartphones, tablets or PCs. However, in control engineering and automation technology also
demand for wireless data transmission of Bluetooth sensors into the control unit is increasing
meanwhile.

Integration of the ?Bluetooth Low Energy? interface into the radio system DATAEAGLE
enables to satisfy this wish and to transmit data from Bluetooth sensors directly into the control unit via fieldbuses such as e.g. PROFINET and to process there. Using the radio system
DATAEAGLE compact 2730 the user can therefore take advantage of wireless sensors for example
at machine parts that are difficult to access; on the other hand he can transmit sensor data to the control unit via Bluetooth Low Energy in a cost-effective and safe manner.

Technical data

DATAEAGLE COMPACT 3712A /3732A

PROTOCOL
VOLTAGE SUPPLY
CONNECTION VOLTAGE SUPPLY
POWER CONSUMPTION
MOUNTING DIN rail mounting
CONFORMITY , 
IP RATING
TEMPERATURE RANGE
FREQUENCY
MAXIMUM NUMBER OF RADIO SLAVES 4
TYPICAL DISTANCE (M)
MAXIMUM PROFIBUS DP TRANSMISSION RATE 1.5 MBit/s
INTERFACE PORT
MAXIMUM NUMBER OF PROFIBUS DP SLAVES 8
PROFISAFE Yes

Downloads

Documents

DATAEAGLE Presentation

General presentation of the DATAEAGLE product range.

Download

DATAEAGLE User Manual

Complete user manual for DATAEAGLE 3712A / 3732A.

Request Download

Videos

[evp_embed_video url=”/ftp/schildknecht/dataeagle3000/video-222240.mp4″ template=”mediaelement”]

The post Wireless PROFIBUS – DATAEAGLE 3712A first appeared on ATEVA Technologies.]]>