GATEWAYS | ATEVA Technologies

SmartLink HW PN

Webmaster — Wed, 10 Sep 2025 10:50:36 +0000

SmartLink HW PN

PROFINET Gateway for Asset Management

Access PROFINET networks via FDI and OPC UA

smartLink HW-PN provides access to PROFINET networks. By integrating standardized technologies like a FDI communication server (OPC UA), it provides transparent access to all connected devices.

smartLink HW-PN can be used for asset management, device configuration and monitoring.

Asset Management and Parameterization of PROFINET Devices

Parameterization and Asset Management

Secure, standardized access to devices
Parallel to and independent of the controller

Compatible with established communication standards

Implements the standard FDI communication server interface based on OPC UA

Asset Management and Parameterization of PROFIBUS Devices

Parameterization and Asset Management

Secure, standardized access to devices
Parallel to and independent of the controller

Inexpensive and low-risk Integration

Connection of PROFIBUS devices without additional hardware
Use of existing infrastructure using the PROFINET/PROFIBUS proxy standard for connecting to the PROFIBUS devices

Compatible with established communication standards

Implements the standard FDI communication server interface based on OPC UA

Parameterization and Asset Management

Independent of PROFINET engineering tools
Centralized and time-saving asset management of PROFINET networks with PROFINET and PROFIBUS field devices directly from the control room

Ethernet Access Point to PROFINET networks

Provides 2nd channel to access the field devices
Acts as a PROFINET supervisor
Is part of one PROFINET network
Integrated 2-port switch for use in line or ring network topologies

Key Component for Transition to State-of-the-Art Technology

Re-use of existing PROFINET networks without requiring modification
Access to acyclic data via FDI communication server (OPC UA)

Technical Data

smartLink HW-PN
Hardware	Processor	Altera Cyclone V SoC with dual-core ARM Cortex-A9
	Status LEDs (Gateway)	PWR, RUN, ERR, BUS
	Real-Time Clock	Real-Time clock with buffering, setting the time via browser or by NTP server (buffer time depends on conditions such as ambient temperature and duration of use)
Interfaces	Ethernet	1 x IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T, Connector: RJ45
	PROFINET	2 x IEEE802.3 10BASE-T/100BASE-TX, Connector: RJ45; Embedded PROFINET 2-port switch for line or ring topology Protocol: PROFINET RT / IRT, Support of PROFINET redundancy protocols
Supported	Communication Protocols	PROFINET, PROFIBUS
	PROFINET/PROFIBUS Proxies	Softing: pnGate DP, pnGate PA aplSwitch Field PA
Physical Properties	Dimensions (H x W x D)	120 mm x 28 mm x 110 mm
	Weight	Approx. 430g
	Power Supply	18 VDC … 32 VDC; SELV/PELV power supply mandatory Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
	Typical Power Loss	5 W
	Operating Temperature	-40 °C … +65 °C (see detailed mounting description in user manual)
	Storage Temperature	-40 °C … +85 °C
	Relative Humidity	10 % … 95 %, non-condensing
	Cooling	Convection, no fan
	Mounting	DIN rail 35 mm
	Protection Class	IP20
Conformity / Standards	CE	Electromagnetic compatibility (EMC) and Restriction of Hazardous Substances (RoHS) EN 61000-6-2 Generic standards – Immunity standard for industrial environments EN 61000-6-4 Generic standards – Emission standard for industrial environments EN 55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements Class A EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement Class A EN 50581:2012/EN IEC 63000:2018 RoHS, Assessment to the restriction of hazardous substances
	FCC	FCC 47 CFR Part 15B Section 15.109 (Class A)
	VCCI	VCCI Voluntary Control Council for Interferences by Information Technology Equipment, April 2015

References

Scope of Delivery
Hardware	smartLink HW-PN
Documentation	User Guide as PDF download

Order Numbers
GEA-YA-026010	smartLink HW-PN
LRA-AA-027003	smartPlus PN, License access to one field device

Video

The post SmartLink HW PN first appeared on ATEVA Technologies.

Smartlink HW-DP

Webmaster — Fri, 31 May 2024 19:24:08 +0000

SmartLink DP for asset Management Access Point on PROFIBUS DP networks

Connection of PROFIBUS and HART devices to HART IP, OPC UA, MQTT and FDT

smartLink HW-DP provides PLC independent access to PROFIBUS DP Networks. It enables Plant Asset Management for field devices using standard industry tools and allows using HART IP as a standardized format. smartLink HW-DP is a compact tool that can be integrated without interfering with the operation of existing installations. Thus, it enables Industry 4.0 connectivity for new and existing PROFIBUS DP networks.

Overview

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

Independent of configuration tools
Centralized and time-saving parameterization of PROFIBUS and HART field devices directly from the control room
Access from Plant Asset Management applications for field devices configuration based on FDT / DTM and EDDL standards (acyclic master)

Ethernet Access Point to PROFIBUS DP

Provides 2^nd channel to access the field devices
Acts as PROFIBUS DP master class 2
Support of one PROFIBUS DP segment

Key Component for Transition to State-of-the-Art Technology

Re-use of existing PROFIBUS segments without requiring modification
Access to cyclic and acyclic data via HART-IP and OPC UA

Technical Data

Asset Management and Parameterization of HART Devices

Configuration, Parameterization, Plant Asset Management

Secure, standardized access to devices
Parallel to and independent of the controller

Inexpensive and low-risk integration

Connection of a large number of HART devices without rewiring the devices
Use of existing infrastructure using „HART over PROFIBUS“
Large number of supported Remote IOs

Compatible with established standard applications

Uses HART-IP as standard application protocol
Proven and tested with Emerson AMS Device Manager, ABB FIM, E+H FieldCare and PACTware

Asset Management and Parameterization of PROFIBUS Devices

Configuration, Parameterization, Plant Asset Management

Secure, standardized access to devices
Parallel to and independent of the controller

Compatible with established standard applications

Drivers available for FDT
Proven and tested with E+H FieldCare and PACTware

Direct Access to Process Data from PROFIBUS Networks

Capturing process data directly from the network

Live provision of all process data for further use in typical Industry 4.0 applications such as data analytics
Collecting data directly from the network, replacing the need to access the controller
No intervention in the running process

Secure provision of data using OPC UA

State-of-the-art transmission method in industrial networks
Fast update cycles over OPC UA possible

Asset Monitoring and Diagnostics in PROFIBUS Networks

Complete inventory of the entire network

I&M data from all connected devices
Automated live queries without configuration

Secure provision of data using MQTT

State-of-the-art transmission method for cloud connectivity
Information model based on OPC UA Companion Specifications for PROFINET

Health monitoring of all connected devices

Diagnostic messages and status of all bus stations
Statistics parameters for the entire network

Integrated with Softing plantPerfect Monitor application

Use the plantPerfect Monitor application to monitor the network with all its devices

Downloads

Documents

Datasheet: SmartLink HW-DP

Technical specifications and features.

Download

SmartLink HW-DP — Cloud Access

Access to software, documentation and drivers via our secure cloud.

Drivers & Software

Software, firmware and configuration tools.

Request Download

Documentation

User manual, quick start guide and technical documentation.

Request Download

Other

Additional resources and documentation.

Request Download

References

Scope of Delivery
Hardware	smartLink HW-DP
Documentation	On Website

Order Numbers
GEA-YN-026000	smartLink HW-DP
GEA-YN-026001	smartLink HW-DP 50, Hardware preloaded with licenses for 50 devices
GEA-YN-026002	smartLink HW-DP 100, Hardware preloaded with licenses for 100 devices
GEA-YN-026003	smartLink HW-DP 250, Hardware preloaded with licenses for 250 devices
GEA-YN-026004	smartLink HW-DP 375, Hardware preloaded with licenses for 375 devices
LRA-NN-027004	smartPlus DP, License access to one field device

Additional Products and Services
DBA-KM-020410	mobiLink – Mobile HART interface
LRL-TG-020000	plantPerfect Monitor, perpetual licence including 1 year software updates for 1 device
LMA-TG-020000	plantPerfect Monitor, 1 year software updates for 1 device
LAA-TG-020000	plantPerfect Monitor, 1 year rental licence for 1 device

Training

Misc

smartLink HW-DP
Hardware	Processor	Intel Cyclone V SoC with dual-core ARM Cortex-A9
	Status LEDs (Gateway)	PWR, RUN, ERR, BUS
	Real-Time Clock	Real-Time clock with buffering, setting the time via browser or by NTP server (buffer time depends on conditions such as ambient temperature and duration of use)
Interfaces	Ethernet	1 x IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T, Connector: RJ45
	PROFIBUS DP	1 x Segment with RS485 Physical Layer, Connector: 9-pin Sub-D socket
Supported	Communication Protocols	HART-IP, MQTT, OPC UA, PROFIBUS DP
	PROFIBUS Remote IOs	Siemens: ET 200SP: 155-6BU01-0CN0 ET 200iSP: 152-1AA00-0AB0 ET 200M: 153-2BA10-0XB0 ABB: S800: CI801, CI840, CI840A S900: CI920N, CI920S Pepperl+Fuchs: LB: LB8105, LB8106, LB8109 FB: FB8206, FB8209 R.Stahl: iS1+: CPM 9440/15-01-11 Turck: BL20: BL20-E-GW-DP, BL20-GW-DPV1 excom: GDP 1,5 WAGO: I/O System 750: 750-333, 750-833
	HART IO Modules	Siemens: ET 200SP: 134-6TD00-0CA1, 135-6TD00-0CA1 ET 200iSP: 134-7TD00-0AB0, 135-7TD00-0AB0, 134-7TD50-0AB0, 138-7FA00-0AB0 ET 200M: 332-8TF01-0AB0, 331-7TF00-0AB0, 331-7TF01-0AB0, 331-7TB00-0AB0, 332-8TF00-0AB0 ABB: S800: AI815, AO815, AI845, AO845A, AI895, AO895 S900: AI930N, AO930N Pepperl+Fuchs: LB: LB3002, LB3102, LB3103, LB3105, LB4002, LB4005, LB4102, LB4105, LB3005A2, LB3006A, LB3106A, LB4106A, LB7104A FB: FB3202B1, FB3202B2, FB3205B2, FB3205B3, FB3302B2, FB3305B2, FB4202B2, FB4202B3, FB4205B2, FB4205B3, FB4205C2, FB4302B2, FB7204B3, FB7304B3 R.Stahl: iS1+: AIM 9461/12-08-11, AOM 9466/12-08-11, AUM 9468/32-08-11 Turck: BL20: BL20-2AIH-I, BL20-2AOH-I excom: AIH40Ex, AOH40Ex WAGO: I/O System 750: 750-484, 75x-842
	HART-IP Applications	Emerson AMS Device Manager V14.1.1, V14.5 Endress + Hauser Netilion (FieldEdge SGC500) ABB FIM V3.01
	FDT Applications	PACTware, Endress + Hauser FieldCare
Physical Properties	Dimensions (H x W x D)	120 mm x 28 mm x 110 mm
	Weight	Approx. 430g
	Power Supply	18 VDC … 32 VDC; SELV/PELV power supply mandatory Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
	Typical Power Loss	5 W
	Operating Temperature	-40 °C … +65 °C (see detailed mounting description in user manual)
	Storage Temperature	-40 °C … +85 °C
	Relative Humidity	10 % … 95 %, non-condensing
	Cooling	Convection, no fan
	Mounting	DIN rail 35 mm
	Protection Class	IP20
Conformity / Standards	CE	Electromagnetic compatibility (EMC) and Restriction of Hazardous Substances (RoHS) EN 61000-6-2 Generic standards – Immunity standard for industrial environments EN 61000-6-4 Generic standards – Emission standard for industrial environments EN 55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements Class A EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement Class A EN IEC 63000:2018 RoHS, Assessment to the restriction of hazardous substances
	FCC	FCC 47 CFR Part 15B Section 15.109 (Class A)
	VCCI	VCCI Voluntary Control Council for Interferences by Information Technology Equipment, April 2015

Video

SmartLink DP’ videos available in here !

The post Smartlink HW-DP first appeared on ATEVA Technologies.

FG-200 Gateway

Webmaster — Fri, 01 Mar 2024 09:59:58 +0000

Fieldbus Foundation Gateway : FG-200

Fieldbus Foundation Gateway :

FG-200The FG-200 HSE ( High Speed Ethernet ) /FF ( Foundation fieldbus ) Modbus Gateway : for the integration of control system on Modbus TCP

Overview

Quick and easy commissioning of the Softing gateway: FG-200FF

Optional support for the STHAL Carrier 9419 Bus and Fieldbus 9412 Power Supply (wiring reduced to a minimum)
Import Modbus data to a web server reducing mapping efforts

Optimized Management: Softing: FG-200FF

“Visitor” mode to avoid any interference with the network
Possibility of system management using different software (e.g. Emerson’s AMS) and Field Device Tool (FDT) frame applications (e.g. SMART VISION, FieldMate, Field Device Manager, FieldCare, or PACTware)
Redundancy capacity for Softing Gateway: FG-200FF

Possible redundancy link (D-3 according to FF-593)
Automatic mirroring with data configuration
Very fast redundancy

All necessary tools included

“FF Configuration Tool” for configuring devices and cyclical communication
PACTware for device configuration and basic management.

Technical Data

Downloads

Documents

Datasheet: FG-200 HSE/FF Modbus Gateway

Technical specifications and features of the FG-200 HSE/FF Modbus Gateway.

Download

ATEX Certificate of Conformity

Hazardous location certification documentation.

Download

Achilles Test Report

FG-200 HSE/FF cybersecurity robustness test report.

Download

FG-200 Gateway — Cloud Access

Access to software, firmware, drivers and documentation via our secure cloud.

Drivers & Software

FF HSE DTMs V1.50, Firmware FG-200FF, Search & Configure utility and additional drivers.

Request Download

Documentation

Communication Configuration Tool V2.24, user manual and technical documentation.

Request Download

Other

Whitepaper on Foundation Fieldbus gateway integration and additional resources.

Request Download

References

Description

Hardware	FG-200 HSE/FF Modbus
Logiciel	Outil de configuration FF, FDT CommDTM, PACTware sur CD-ROM
Documentation	Quick Startup Guide, User Manual sur CD-ROM

Références

GCL-EK-024100	FG-200 HSE/FF Modbus (Foundation fieldbus / Modbus TCP )
GCL-EK-024101	FG-200 HSE/FF Modbus, functionalité, conception identique pour une utilisation avec R. STAHL bus-Carrier Series 9419 et Alimentation Fieldbus série 9412

Training

Misc

Modbus HSE <> Fieldbus Foundation Gateway, 4 segments FF

HS Code 85176200

Video

All our videos on the FG-200 available on our cloud

ATEVA Videos

The post FG-200 Gateway first appeared on ATEVA Technologies.

mbGatePB

Webmaster — Sat, 29 Jul 2023 12:16:25 +0000

MODBUS TCP SERVER to PROFIBUS PB (PA/DP) Master Gateway

Simple connection of PROFIBUS Slave Devices to Modbus Control Systems via Internal I/O Mapping

With mbGate PB it is possible to integrate up to 2 PROFIBUS PA segments and 1 PROFIBUS DP segment into Modbus TCP control systems. It acts as Modbus TCP Server and PROFIBUS Master. With our gateway the engineering costs can be reduced since it re-uses existing power conditioners in technology upgrade projects. It enables configuration, parameterization and plant asset management using standard industry tools.

Overview

mbGate PB Gateway : Key Component for Transition to State-of-the-Art Technology

Simple replacement of installed PROFIBUS DP/PA segment couplers
Re-use of existing PROFIBUS segments without requiring modification

Direct Connectivity to PROFIBUS Segments

Single access point to PROFIBUS DP and PROFIBUS PA segments from Modbus TCP networks
Acting as Modbus TCP Server and PROFIBUS PA and PROFIBUS DP Master
Support of one PROFIBUS DP segment and up to two PROFIBUS PA segments
Support of up to 64 PROFIBUS devices

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

Supports major Modbus engineering tools such as Schneider Unity Pro or Siemens TIA Portal
Included CommDTM allowing use in FDT/DTM frame applications
EDD-based device parametrization using Siemens Simatic PDM

MODBUS/TCP Redundancy

Supports the use of two redundant PLCs and two redundant gateways
Easily enabled via licensing
Full control of redundant operation mode via engineering and PLC

Downloads

Documents

Datasheet: mbGate PB

Technical specifications and features.

Download

mbGate PB — Cloud Access

Access to firmware, drivers and documentation via our secure cloud.

Drivers & Software

Firmware, PROFIdtm, Search and Configure tool, PDM Libraries, PACTware.

Request Download

Documentation

Modbus Gateways User Guide, samples.

Request Download

Other

Additional resources.

Request Download

Reference

Scope of Delivery
Hardware	mbGate PB Gateway
Documentation	On Website

Order Numbers
GCA-EN-024808	mbGate PB, Modbus TCP to PROFIBUS Gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).

Additional Products and Services
LRA-EN-024851	gatePlus HighAvailability, License for activating redundancy features in mbGate PB
LRL-DY-134501	dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-EL-024802	mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 2 PA segments (up to 32 PA devices).
GCA-EL-024804	mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 4 PA segments (up to 64 PA devices).
GCA-EN-024806	mbGate DP, Modbus TCP to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

Vidéo

Video Channel : Retrouvez nous sur notre page channel YOUTUBE

The post mbGatePB first appeared on ATEVA Technologies.

Echolink S7 Compact: the adaptator for S7 Communication

Webmaster — Wed, 19 Jul 2023 07:56:51 +0000

Echolink S7 Compact

Echolink S7 Compact :

Echolink S7 Compact is an adapter for Communication with Siemens S7 Controllers
Integration of S7-200, S7-300 and S7-400 into Ethernet Architectures
PLC Programming and Communication via Interface
Integration into Product Management and Visualization Applications echolink S7compact
Integration of S7-200, S7-300 and S7-400 into 10/100 Mbit Ethernet Networks
Direct communication with one or several controllers in any kind of TCP network structure
Support of up to 16 simultaneous connections
Use of standard TCP/IP for communication within plant or company networks and with the Internet
Expansion of participants using MPI or PROFIBUS via pass-through PG port Interference-free integration into existing control systems
Centralized configuration of all adapters in the network via PC
Power supply directly from controller or via external power supply

Integration of S7-200, S7-300 and S7-400 into Ethernet Architecture

PLC Programming and Communication via Interface

Integration into Product Management and Visualization Applications

Overview

With the Echolink S7 Compact, you can integrate S7-200, S7-300 and S7-400 via 10/100 Mbit Ethernet networks

Direct communication with one or more controllers over any TCP fabric
Supports up to 16 simultaneous connections
Use standard TCP/IP for communication within the plant or company network and with the Internet
Extended communication using MPI or PROFIBUS ports via PG port.
interference-free integration into an existing control system
Central configuration of all adapters on the network via NetCon S7 software
Power supply directly from controller or via external power supply
Cost-effective solution alternative

Programming Adapter Supporting all Relevant S7 Engineering Tools

Interface for programming controllers via Ethernet
Compatibility with STEP7, TIA-Portal, WinCC and WinCC flexible
Display and configuration of the adapter in STEP7 or TIA portal

Application Integration through RFC1006 and OPC UA

Connection to HMI station and PLC directly via RFC1006 Ethernet protocol
Support of OPC and OPC UA by using dataFEED OPC Suite for integration into higher-level systems, e.g. for production management

Technical Data

Hardware Requirements	Ethernet Interface
PC Connection	RJ45
Supported Controllers	Siemens S7-200, Siemens S7-300, Siemens S7-400
Supported Bus Systems	PROFIBUS, MPI
Communication Type	Ethernet 100 BASE-TX/10 BASE-T
Supported Transfer Rates to PLC	9.6 KBit/s … 12 MBit/s with automatic detection
Supported Transfer Rates to PC	10 / 100 MBit/s
Simultaneous Connections	16 TCP/IP, 32 MPI / PROFIBUS Connections
Power Supply	24V ± 25%, external or from Controller
Galvanic Isolation	Yes
Temperature Range	0°C … +55°C
Housing, Dimensions (W x H x D)	40,6 mm x 16,7 mm x 74,3 mm
Weight	Approximately 40g
Approvals	CE
Protection Class	IP20
Configuration Software	NetCon S7 for Local and Remote Configuration
Supported Application Software	Siemens TIA Portal V11-V13, Siemens STEP 7 V5.5, Siemens WinCC, Siemens WinCC flexible, Siemens ProTool
System Requirements	PC/PG with Windows XP, Windows 7, Windows 8, Windows 10, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012

Downloads

Documents

Datasheet: Echolink S7 Compact

Technical specifications.

Download

User Manual

Getting started guide.

Download

References

ATV-GPL-CS-191000

echolink S7-compact

Scope of Delivery

Hardware	echolink S7-compact
Software	Configuration Software NetCon S7 on CD-ROM (also downloadable from Softing website)
Documentation	Product handbook and configuration tutorials on CD-ROM (also downloadable from Softing website)

Additional Products and Services

ATV-LRL-DY-134501	dataFEED OPC Suite
ATV-LRL-DY-132101	dataFEED OPC Server Siemens
ATV-GAA-DX-145111	uaGate SI
ATV-GAL-YY-143101	echocollect e (and other echocollect variants)
110-1000-01	Training “Industrial Ethernet – Troubleshooting in Automation“, 3 days

The post Echolink S7 Compact: the adaptator for S7 Communication first appeared on ATEVA Technologies.

dataFEED uaGate SI

Webmaster — Thu, 20 Apr 2023 11:58:39 +0000

OPC UA Server & MQTT Publisher Gateway for SIMATIC S7 Controllers

Access Siemens PLC Data & integrate data with OPC UA in higher level management systems

uaGate SI makes data integration easier than ever before. The gateway supports the connection of SIMATIC S7-300, S7-400, S7-1200 and S7-1500 controllers from Siemens and uses the OPC UA standard for a simple and secure data integration of new and existing plants in higher-level management systems, such as ERP, MES or SCADA systems.

In addition, uaGate SI also offers MQTT Publisher functionality, enabling direct integration of PLC data into private or public IoT cloud applications on the IT side. The generic MQTT implementation supports the use of a large number of different cloud providers. Similar to the OPC UA standard, MQTT also supports various security mechanisms such as encrypted connections, certificates and user authentication, thus contributing to a high level of data security.

Overview

Access to Siemens PLC Data from OPC UA Applications

Read and write access to SIMATIC S7-300, S7-400, S7-1200 and S7-1500 controllers
Support of optimized data blocks in SIMATIC S7-1200 and S7-1500 controllers
Integration of higher-level management systems like ERP, MES or SCADA using integrated OPC UA Server providing open, platform-independent and market-proven communication
Easy local and global access to field data and routing through firewalls
Especially dedicated to retrofit upgrades, thus protecting former investments
No need for software updates, operating system patches and PC updates resulting in years of failure-free operation
No PLC programming or dedicated PC required

Optimized for Siemens Integration

Symbolic name import from Siemens TIA Portal and SIMATIC STEP 7 projects
Namespace configuration by browsing of SIMATIC S7 1200/1500 variables
Easy setup of OPC UA Server requiring only a few steps for accessing Siemens PLC data
Web interface for gateway configuration

Industry-proven Security

Physically separated interfaces and separate configuration rights for OT and IT networks preventing intrusions
Supporting security standards as SSL/TLS and X.509 certificates
OPC UA compliant data encryption and user authentification
Security supported for MQTT communication with private and public clouds

Downloads

Documents

White Paper: dataFEED uaGate SI

Product overview and use cases.

Download

dataFEED uaGate SI — Cloud Access

Access to firmware, user manual and documentation via our secure cloud.

Drivers & Software

Firmware and software.

Request Download

Documentation

User manual and technical documentation.

Request Download

Other

Additional resources.

Request Download

References

Scope of Delivery
Hardware	uaGate SI
Software	Tool for configuration over integrated web interface
Documentation	Quick Startup Guide (printed documentation)

Order Numbers
GAA-DX-145111	uaGate SI

Video

Howto configure uaGate SI with SIMATICS S7 Controller with Optimized access

Howto connect uaGate SI with an OPC UA Client

Misc

The post dataFEED uaGate SI first appeared on ATEVA Technologies.

pnGate DP

Webmaster — Mon, 27 Jun 2022 17:20:30 +0000

pnGate DP : PROFINET Gateway for PROFIBUS Slave

The pnGate DP allows you to connect PROFIBUS slaves to a PROFINET network. Keep your PROFIBUS slaves reliable and important. no more endless lengths of Profibus cable, which cause reflection problems. the gateway, as soon as possible, will solve the problem.

Overview

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

Supports major PROFINET engineering tools such as TIA Portal, Step7 und PC WORXS
Included CommDTM allowing use in FDT/DTM frame applications
EDD-based device parametrization using Siemens Simatic PDM

Direct Connectivity to PROFIBUS Segments

Single access point to PROFIBUS DP segment from PROFINET networks
Acting as PROFINET device and PROFIBUS DP master
Support of one PROFIBUS DP segment
Support of up to 32 PROFIBUS devices

Key Component for Transition to State-of-the-Art Technology

Re-use of existing PROFIBUS segments without requiring modification
Support of MRP and S2 PROFINET redundancy for increased reliability

Downloads

Documents

Datasheet: pnGate DP

Technical specifications and features.

Download

pnGate DP — Cloud Access

Access to software, firmware, drivers and documentation via our secure cloud.

Drivers & Software

Profibus API and Drivers, Search and Configure tool, firmware.

Request Download

Documentation

User guide and technical documentation.

Request Download

Other

Additional resources.

Request Download

Reference


GCA-AN-024606	pnGate DP, PROFINET to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

Additional Products and Services
LRL-DY-134501	dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-AN-024608	pnGate PB, PROFINET to PROFIBUS gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
GCA-AL-024602	pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-AL-024604	pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).

Vidéos

The post pnGate DP first appeared on ATEVA Technologies.

mobiLink Power HART-FF-PA

Webmaster — Mon, 05 Jul 2021 15:34:37 +0000

mobiLink power allows a direct connection with the “field device” without any infrastructure. Built-in power supply eliminates the need for additional components such as an external power supply, termination resistor and greatly facilitates maintenance

Single interface for the major Process Automation protocols

HART Master, Foundation Fieldbus Host and PROFIBUS PA Master included in one device
Parametrization and configuration of field devices
Diagnostics and condition monitoring

Overview

Provides the power supply for the field devices

Eliminates the need for an additional power supply and power conditioner for workbench applications

Support of FDI, FDT frame applications and major engineering tools

PACTware FDT frame application and HART communication DTM included
Communication DTM for Foundation Fieldbus and PROFIBUS PA (optional)
Foundation Fieldbus configuration tool (optional)
Application Program Interface for integration into engineering systems

Unlimited flexibility in use

mobilink Power draws power from the connected computer via USB

Downloads

Documents

Datasheet: mobiLink Power HART-FF-PA

Technical specifications and features of the mobiLink Power interface.

Download

mobiLink Power — Cloud Access

Access to software, firmware, drivers and documentation via our secure cloud.

Drivers & Software

mobiLink Manager (32/64bit), mobiLink DTM (32/64bit), PACTware.

Request Download

Documentation

User manual, quick start guide and technical documentation.

Request Download

Other

Firmware, mobiLink presentation, licensing information and additional resources.

Request Download

References

DUA-KM-020440	mobiLink Power for HART applications, including accessories
LRA-KK-021973	linkPlus FF – License to activate Foundation Fieldbus
LRA-LL-021974	linkPlus PA – License to activate PROFIBUS PA
LRA-KK-020721	Licence for FF Configuration Tool ComConf

Accessories

Les personnes intéressés par ce produit, peuvent être intéressés par :

mobiLink – HART + FF + PA
This product has multiple variants. The options may be chosen on the product page Login

The post mobiLink Power HART-FF-PA first appeared on ATEVA Technologies.

Contr. SIEMENS -> OPC UA & MQTT

Webmaster — Thu, 10 Jun 2021 14:55:56 +0000

dataFEED uaGATE SI : Passerelle pour contrôleur Siemens fournissant un serveur OPC UA et une interface MQTT ( Cloud )

La passerelle dataFEED uaGate SI est une passerelle pour PLC Siemens. Elle intègre les fonctionalités OPC UA pour une connection rapide et sécurisée des données avec les systèmes de managements, tel que ERP, MES ou SCADA, sur des installations existantes ou nouvelles. Peut utiliser la publication MQTT, permet l’intégration des données au sein des applications loT cloud. le dataFEED uaGate de taille relativement réduite, permet une approche d’avant garde.

General

Connectivité facile aux contrôleurs

Connectivité entre contrôleurs et systèmes IT (ERP, MES, SCADA), mais aussi entre contrôleurs utilisant des plateformes indépendantes et/ou des systèmes OPC UA standards du marché.
Technologie OPC UA supportant des réseaux locaux ou globaux ainsi que l’utilisation de firewall
Fonctionnalités “MQTT Publisher” pour le transfert des données de productions vers des solutions Cloud LoT.
Configuration de la passerelle via interface Web, pemettant l’import rapide des symboles depuis SIMATIC STEP 7 et des projets TIA Portal.

Securité maximale

Réseaux physiquement séparés afin d’éviter toute intrusion
Accès individuel aux données de la PLC protégé.
Droits de configuration séparés sur le contrôleur et aux niveaux IT, intéressant pour les OEMs et les concepteurs de solutions, souhaitant garder secret leur configuration.
Données encryptées et identifications des utilisateurs, répondant aux critères de sécurités absolus.

Investissement dans la protection

Ajoute un moyen de communication aux systèmes existants.
Composante Standard, qui peut être facilement intégrée à des projets de différentes tailles.
Convient à toutes applications : nouvelles ou sur anciennes installations.

Maintenance Zéro

All-hardware gateway – Aucun besoin de mise à jour logiciel, de patches ou de maintenance.
Aucune programmation PLC ou de PC dédié
Systèmes “Failure-free” pour des années et des années.

Détails techniques

Hardware	Processor	Altera Cyclone V SoC with Dual-core ARM Cortex-A9
	Connectors	2 x IEEE 802.3 100BASE-TX/10BASE-T (independent interfaces)
	Status LEDs	PWR (power supply), RUN (running), ERR (error), SYS (configuration)
	Dimensions (H x W x D)	100 mm x 22.5 mm x 105 mm
	Power Supply	18 VDC … 32 VDC, SELV/PELV supply mandatory Typically 200 mA, maximum 1 A at switch-on
	Operating Temperature, Horizontal DIN Rail Installation	-40 °C .. 50 °C (0 mm minimum distance) -40 °C .. 55 °C (22.5 mm minimum distance)
	Operating Temperature, Vertical DIN Rail Installation	-40 °C .. 35 °C (0 mm minimum distance) -40 °C .. 40 °C (22.5 mm minimum distance)
	Storage Temperature	-40 °C .. 85 °C
	Relative Humidity	10 % … 90 %, non-condensing
	Weight	About 0.2 kg
	Mounting	DIN Rail (35 mm)
	Housing	Phoenix Contact ME MAX
	Protection Class	IP20
Software	Protocols	SIMATIC S7 , OPC UA (Server, 20,000 items in total), MQTT (Publisher, 1,000 topics)
	Supported PLCs	Siemens S7-300, S7-400, S7-1200, S7-1500
	Supported Engineering Tools	SIMATIC Step 7 TIA Portal, version 13 and 13 SP1
Conformity	Emission	EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 55011, Group 1, Class A EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 55022, Class A EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 61000, Part 6-4 FCC CFR45, Part 15 Section 15.107 and 15.109 (Class A), VCCI Class A Information Technology Equipment 2002
	Immunity	EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 61000, Part 6-2
Certifications	CE, FCC, RoHS

Téléchargement

Downloads

Drivers & Software
- Firmware – Latest release
- dataFEED uaGate SI – Release Note
- dataFEED Exporter Version (free of charge) Software for exporting data item information from a Siemens TIA Portal project
Manuals & Documentation
- dataFEED uaGate Quick Startup Guide ( PDF)
- dataFEED uaGate Housing ( Dimension )
Certificates
- Certificates availables
Data Sheets
- dataFEED uaGate SI Datasheet

Références

ATV-GAA-DX-145111

dataFEED uaGate SI

Scope of Delivery

Hardware	dataFEED uaGate SI
Software	Tool for configuration over integrated web interface
Documentation	Quick Startup Guide (printed documentation)

Formation

Pas de formation spécifique pour ce module

Wiki

What is the power dissipation of the uaGate or edgeGate?

The power dissipation also depends on the operating mode (Ethernet load, supply voltage, ambient temperature, module dispersion, …). A typical value for power dissipation Pv is about 3.3 watts at 24VDC.

What is the maximum data throughput of uaGate and edgeGate?

2.500 byte items with 200ms polling time

Is the store-and-forward functionality towards OPC UA from uaGate and edgeGate supported?

The buffering as specified in the OPC UA standard is implemented, but the items are stored in the RAM, not on the SD card. Please mind that the OPC UA client must support this functionality and demand it from the server.

How to change the language of the user interface with uaGate and edgeGate?

The browser preferred language is used for the user interface, currently English and German is supported. If you want to override this default setting, change the preferences in your browser.

For example, in Mozilla Firefox:
Menu -> Settings -> Content -> Languages and change or move the desired language to the top of the list.

Which cloud platforms are supported?

We support with all Softing gateways (echocollect, uaGate, edgeGate) the Microsoft Azure Cloud, Amazon AWS Cloud, IBM Bluemix Cloud and other cloud providers, which are using MQTT for telemetry data.

The post Contr. SIEMENS -> OPC UA & MQTT first appeared on ATEVA Technologies.

Contr. Modbus TCP -> OPC UA & MQTT: uaGate MB

Webmaster — Thu, 10 Jun 2021 12:48:26 +0000

dataFEED uaGate Modbus TCP

Passerelle pour OPC UA et communication MQTT vers PLCs Modbus TCP

Fonctionalité de communication OPC UA
Import des symboles utilisant les données du contrôleur via interface web ?
Haute protection assurée pour le transfert des données

Général

Accès des données Modbus de votre PLC pour les applications OPC UA

Accès aux contrôleurs Modbus, ex:. Schneider Electric, Wago, Beckhoff, Phoenix Contact, etc….
Intégration complète dans les systèmes de “Managements” comme : ERP, MES ou SCADA utilisant un serveur OPC UA, fournissant une plateforme indépendante fiable et sécurisée.
Accès aux données locales et globales facile et intégration facile et rapide à travers les pare-feux
Spécialement conçu pour des mises à jours de systèmes vieillissant et limitant ainsi, les investissements lourds.
Pas besoin de mise à jours logiciel, opérating systems, ce qui limite les risques de “crash” à long terme.
Programmation PLC minimale pour la configuration des registres
Pas besoin de PC dédié

Données de projets PLC disponibles pour utilisation spécifique

Import des symboles depuis fichier TXT
Installation simple et facile du serveur OPC, qui ne demande que quelques étapes pour l’accès des données PLC Modbus
Interface “Web-based” pour la configuration

Sécurité de type industriel “maximale”

Séparation physique des interfaces et séparations des droits pour les réseaux OT et IT.
Supportant les standards de sécurité tel que : SSL/TLS et certificats X.509
Encryption des données au standard OPC UA et authentification des utilisateurs
Securité supportée pour la communication MQTT avec cléf privée et ” clouds ” publics

Details techniques

Hardware	Processor	Altera Cyclone V SoC with Dual-core ARM Cortex-A9
	Connectors	2 x IEEE 802.3 100BASE-TX/10BASE-T (independent interfaces)
	Status LEDs	PWR (power supply), RUN (running), ERR (error), SYS (configuration)
	Dimensions (H x W x D)	100 mm x 22.5 mm x 105 mm
	Power Supply	18 VDC … 32 VDC, SELV/PELV supply mandatory Typically 200 mA, maximum 1 A at switch-on
	Operating Temperature, Horizontal DIN Rail Installation	-40 °C .. 50 °C (0 mm minimum distance) -40 °C .. 55 °C (22.5 mm minimum distance)
	Operating Temperature, Vertical DIN Rail Installation	-40 °C .. 35 °C (0 mm minimum distance) -40 °C .. 40 °C (22.5 mm minimum distance)
	Storage Temperature	-40 °C .. 85 °C
	Relative Humidity	10 % … 90 %, non-condensing
	Weight	About 0.2 kg
	Mounting	DIN Rail (35 mm)
	Housing	Phoenix Contact ME MAX
	Protection Class	IP20
Software	Protocols	Modbus TCP, OPC UA (Server, 20,000 items in total), MQTT (Publisher, up to 1,000 topics)
	Supported Controllers	Modbus TCP controllers, e.g. from Schneider Electric, Wago, Beckhoff, Phoenix Contact, etc.
Conformity	Emission	EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 55011, Group 1, Class A EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 55022, Class A EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 61000, Part 6-4 FCC CFR45, Part 15 Section 15.107 and 15.109 (Class A), VCCI Class A Information Technology Equipment 2002
	Immunity	EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 61000, Part 6-2

Téléchargements

Documents

uaGate MB Datasheet

Product datasheet and specifications.

Download

dataFEED uaGate MB — Cloud Access

Access to firmware, documentation and additional resources via our secure cloud.

Drivers & Software

Firmware and software updates.

Request Download

Documentation

User manual, quick start guide and technical documentation.

Request Download

Other

Certificates, brochures and additional resources.

Request Download

Références

ATV-GAA-YE-145133

uaGate MB

Scope of Delivery

Hardware	uaGate MB
Software	Tool for configuration over integrated web interface
Documentation	Quick Startup Guide (printed documentation)

Wiki

What is the power dissipation of the uaGate or edgeGate?

What is the maximum data throughput of uaGate and edgeGate?

2.500 byte items with 200ms polling time

Is the store-and-forward functionality towards OPC UA from uaGate and edgeGate supported?

How to change the language of the user interface with uaGate and edgeGate?

The browser preferred language is used for the user interface, currently English and German is supported. If you want to override this default setting, change the preferences in your browser.

For example, in Mozilla Firefox:
Menu -> Settings -> Content -> Languages and change or move the desired language to the top of the list.

Which cloud platforms are supported?

We support with all Softing gateways (echocollect, uaGate, edgeGate) the Microsoft Azure Cloud, Amazon AWS Cloud, IBM Bluemix Cloud and other cloud providers, which are using MQTT for telemetry data.

Les personnes intéressées par ce produit peuvent être intéressées par le produit suivant :

Echocollect

The post Contr. Modbus TCP -> OPC UA & MQTT: uaGate MB first appeared on ATEVA Technologies.