PROFIBUS | ATEVA Technologies https://www.atevatech.net Votre partenaire en réseaux industriels Tue, 10 Mar 2026 22:52:30 +0000 fr-FR hourly 1 https://wordpress.org/?v=6.8.2 https://www.atevatech.net/wp-content/uploads/2021/03/cropped-cropped-ATV_logo_web-32x32.png PROFIBUS | ATEVA Technologies https://www.atevatech.net 32 32 PBPro-ETH https://www.atevatech.net/fr/produit/pbpro-eth-2/?utm_source=rss&utm_medium=rss&utm_campaign=pbpro-eth-2 Sun, 26 May 2024 12:50:29 +0000 https://www.atevatech.net/?post_type=product&p=36977 Passerelle Ethernet Profibus: PBPro ETH:
HS Code : 84715000
Se décline en 1, 2 , 3 et 4 canaux

The post PBPro-ETH first appeared on ATEVA Technologies.]]>

PBpro ETH

Remote PROFIBUS Interfaces for Use as Master or Slave

PBpro ETH is a family of interfaces for remote access to one, two, three or four PROFIBUS segments via Ethernet for device parameterization, controller programming and data acquisition. On the PC the remote interface acts like a local PROFIBUS board.
PBpro-ETH

Overview

Wide Range of Applications

  • De-facto standard for device parameterization via FDT/DTM
  • PROFIBUS connection for PC-based measuring and monitoring systems
  • External PROFIBUS interface for PC-based field devices and embedded computer systems

Individual Protocol Settings for Each Channel

  • Access to process data and parameters in connected devices as PROFIBUS DP Master or Master Class 2 (also simultaneously with existing control systems)
  • Data exchange with controllers as PROFIBUS DP Slave
  • Integration into PROFIBUS FMS systems, or into proprietary applications via PROFIBUS FDL
  • Each channel acting as an individual PROFIBUS PC interface

Easy Administration and Efficient Integration

  • Assignment of IP address and configuration with accompanying “Search and Configure” tool and integrated web interface
  • Commented sample programs for easy use of the PROFIBUS application programming interface (API)
  • Free-of-charge communication DTM for PBpro ETH supporting parameterization of PROFIBUS devices by FDT tools

Technical details

PBpro ETH
Single Channel		 PBpro ETH
Dual Channel		 PBpro ETH
Triple Channel		 PBpro ETH
Quad Channel
Number of Channels 1 2 3 4
PROFIBUS Protocol
DP-V0 Master All Channels All Channels All Channels
DP-V1 Master: Acyclic C2 Services All Channels All Channels All Channels
FMS All Channels All Channels All Channels
FDL All Channels All Channels All Channels
DP-V0 Slave Channel 2 Channel 2,3 Channel 2,3,4
Connector 9-pin D-Sub female, EIA-485 (RS-485), galvanically isolated
Transfer Rates 9.6; 19.2; 45.45; 93.75; 187.5; 500; 1500; 3000; 6000; 12000 Kbit/s
Host Interface
Ethernet 100BASE-TX/10BASE-T, 100 Mbit/s and 10 Mbit/s with automatic detection, RJ45 connector
Web Server For device status and configuration
Remote API Windows DLL for host computer
TCP/IP Socket Library Easily portable source code and programming samples for non-Windows computers
Miscellaneous
Mounting 35 mm DIN Rail
Dimensions (W x H x D) 47 mm x 131 mm x 111 mm 110 mm x 131 mm x 111 mm 110 mm x 131 mm x 111 mm 110 mm x 131 mm x 111 mm
Power Supply 24 VDC (±20%) Typically 0.2A 24 VDC (±20%) Typically 0.3A 24 VDC (±20%) Typically 0.4A 24 VDC (±20%) Typically 0.5A
Temperature Range 0 °C … +55 °C (Operation); -20 °C … +70 °C (Storage); fanless convection cooling
Relative Humidity < 90%, Non-Condensing
Protection Class IP20
Available Drivers Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8, Windows Server 2003 R2, Windows Server 2008

Downloads

Documents

Fiche technique : PBPRo Ethernet

Spécifications techniques et caractéristiques.

Télécharger

PBPRo Ethernet — Accès Cloud

Accès aux logiciels, firmware et documentation via notre cloud sécurisé.

Pilotes & Logiciels

Logiciels et firmware.

Demander le téléchargement

Documentation

Manuel utilisateur et documentation technique.

Demander le téléchargement

Autre

Ressources complémentaires.

Demander le téléchargement

References

DEL-NN-012311 PBpro ETH; 1 canal
DEL-NN-012312 PBpro ETH; 2 canaux
DEL-NN-012313 PBpro ETH; 3 canaux
DEL-NN-012314 PBpro ETH; 4 canaux

Scope of Delivery

Hardware PROFIBUS Remote Interface
Software Windows Drivers, Sample Programs, PROFIdtm
Documentation User Guide

Produits complémentaires

OPC-PB PROFIBUS OPC Server for DP-V0 / DP-V1
DCF-DY-4100 OPC Server for S7 / S5
TRA-PB-TECH PROFIBUS Technology Training

You may also be interested in:

The post PBPro-ETH first appeared on ATEVA Technologies.]]> epGate DP https://www.atevatech.net/fr/produit/epgate-dp/?utm_source=rss&utm_medium=rss&utm_campaign=epgate-dp Tue, 02 Apr 2024 10:05:54 +0000 https://www.atevatech.net/?post_type=product&p=36779

Ethernet/IP to PROFIBUS DP Master Gateway

Simple connection of PROFIBUS DP Slave Devices to Ethernet/IP Control Systems via Internal I/O Mapping

With epGate DP it is possible to integrate one PROFIBUS DP segment into Ethernet/IP control systems. With epGate DP the engineering costs can be reduced since it re-uses existing PROFIBUS DP segment without the requiring modification. It enables configuration, parameterization and plant asset management using standard industry tools.

Similar Solutions
epGate PA: Integrate up to 4 PROFIBUS PA segments into ethernet/IP systems
epGate PB: Integrate up to 2 PROFIBUS PA segments & 1 PROFIBUS DP segment into ethernet/IP systems
epGate PN: Integrate PROFINET I/O devices into ethernet/IP systems

Général

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Supports major EtherNet/IP engineering tools such as Studio 5000 and AMS Device Manager
  • Included CommDTM allowing use in FDT/DTM frame applications
  • EDD-based device parametrization using Siemens Simatic PDM

Direct Connectivity to PROFIBUS Segments

  • Single access point to PROFIBUS DP segment from EtherNet/IP networks
  • Acting as EtherNet/IP device (adapter) and PROFIBUS DP master
  • Support of one PROFIBUS DP segment
  • Support of up to 32 PROFIBUS devices

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFIBUS segments without requiring modification
  • Support of common control systems e.g. Emerson DetlaV or Rockwell Control Logix
  • Support of DLR for redundant communication in the ring with EtherNet/IP

Simple Integration Through Add-On Instructions

  • Data access of PLC program to PROFIBUS devices without requiring detailed PROFIBUS knowledge
  • Mapping between the two protocols generated by provided tools
  • Use of Add-On Instructions (AOI) containing detailed PROFIBUS data type definitions
  • Transparent communication overcoming protocol differences
  • Optimized for usage with Allen Bradley controllers

Téléchargements

epGate DP — Accès Cloud

Accès à tous les téléchargements depuis notre cloud sécurisé.

Pilotes & Logiciels

Logiciels et pilotes.

Demander le téléchargement

Documentation

Manuel utilisateur et documentation technique.

Demander le téléchargement

Fiche technique

Fiche technique epGate DP.

Télécharger la fiche technique

Autres

Ressources supplémentaires.

Demander le téléchargement

Références

Scope of Delivery
Hardware epGate DP Gateway
Documentation On Website

 

Order Numbers
GCA-CN-024706 epGate DP, EtherNet/IP to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

 

Additional Products and Services
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-CN-024708 epGate PB, EtherNet/IP to PROFIBUS Gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
GCA-CL-024702 epGate PA, EtherNet/IP to PROFIBUS PA Gateway. Supports up to 2 PA segments (up to 32 PA devices).
GCA-CL-024704 epGate PA, EtherNet/IP to PROFIBUS PA Gateway. Supports up to 4 PA segments (up to 64 PA devices).
The post epGate DP first appeared on ATEVA Technologies.]]> Wireless PROFIBUS – DATAEAGLE 3712A https://www.atevatech.net/fr/produit/wireless-profibus-dataeagle-3712a/?utm_source=rss&utm_medium=rss&utm_campaign=wireless-profibus-dataeagle-3712a Mon, 31 Jul 2023 13:37:45 +0000 https://www.atevatech.net/?post_type=product&p=35656

DATAEAGLE COMPACT 3712A / 3732A – PROFIBUS on WIRELESS

DATAEAGLE COMPACT 3712A / 3732A

Le système radio DATAEAGLE Compact 3712A a été spécialement développé pour la transmission transparente des données de PROFIBUS DP et PROFIsafe via Bluetooth. La technologie brevetée garantit une liaison radio extrêmement fiable sans perturbations radio et évite les temps d’arrêt de l’installation.

  • Optimisé pour PROFIsafe via PROFIBUS DP
  • Plug and Play – aucune configuration d’appareil nécessaire
  • Portée jusqu’à 1 km avec ligne de mire

L’utilisation de la technologie sans fil Bluetooth 5 avancée dans le DATAEAGLE Compact 3732 permet les exigences de vitesse et de latence les plus élevées. Cela rend le DATAEAGLE 3732 particulièrement adapté aux applications de sécurité hautes performances.

Données Techniques

DATAEAGLE COMPACT 3712A /3732A

 

PROTOCOL PROFIBUS
VOLTAGE SUPPLY 24 V DC
CONNECTION VOLTAGE SUPPLY Terminal clamps
POWER CONSUMPTION 100 mA
MOUNTING DIN rail mounting
CONFORMITY CE, FCC
IP RATING IP20
TEMPERATURE RANGE -20…+60 °C
FREQUENCY 2,4 GHz
MAXIMUM NUMBER OF RADIO SLAVES 4
TYPICAL DISTANCE (M) 300
MAXIMUM PROFIBUS DP TRANSMISSION RATE 1.5 MBit/s
INTERFACE PORT 9 pol. SUB-D
MAXIMUM NUMBER OF PROFIBUS DP SLAVES 8
PROFISAFE Yes

Téléchargements

Documents

Présentation DATAEAGLE

Présentation générale de la gamme de produits DATAEAGLE.

Télécharger

DATAEAGLE Manuel Utilisateur

Manuel utilisateur complet pour DATAEAGLE 3712A / 3732A.

Demander le téléchargement

https://atevatech.aztgrp.net/index.php/s/rbo5RneMMeYRdep

The post Wireless PROFIBUS – DATAEAGLE 3712A first appeared on ATEVA Technologies.]]> Testeur PROFIBUS DP & PA https://www.atevatech.net/fr/produit/testeur-profibus-dp-bc-700-pb/?utm_source=rss&utm_medium=rss&utm_campaign=testeur-profibus-dp-bc-700-pb Wed, 12 Apr 2023 13:16:51 +0000 https://www.atevatech.net/?post_type=product&p=34661 Testeur Profibus DP. Constitué d'une valise avec le testeur, une sonde avec prises PG DB9 ( ou M12 en Option ) , cordon d'alimentation, manuel utilisateur et Logiciel

The post Testeur PROFIBUS DP & PA first appeared on ATEVA Technologies.]]>

Testeur PROFIBUS DP

profibustester5bc-700-pb_d_en_160401_200

Le testeur PROFIBUS DP  le partenaire idéal

Le  testeur PROFIBUS  (pb-t5 ou BC-700-PB) est un outil de diagnostic et de dépannage puissant pour tester les câbles, mesurer les signaux et l’analyse de la communication de réseaux PROFIBUS.

Le testeur Profibus DP est alimenté par batterie et fournit un affichage graphique, ce qui permet des résultats rapides lorsque vous travaillez en mode autonome. En option, également le réseau PROFIBUS PA peut être analysé. En outre, le BC-700-PB soutient l’exportation des résultats des tests pour l’analyse avancée.

Général

Le testeur profibus vous permet le test des câbles, bus physique et bus de communication “All-In-One”

  • Combinaison de testeur de signal, oscilloscope à mémoire, protocolanalyzer, simulateur de maître et la fonctionnalité de testeur de câble en un seul outil de diagnostic
  • Mode autonome, plus des diagnostics basés sur PC étendues
  • Adaptés pour l’installation, la configuration et la mise en service, la documentation, les tests d’acceptation, l’optimisation du réseau, la maintenance préventive, le dépannage ainsi que des tests de laboratoire

Très mobile, le testeur de bus permet des tests, même sans ordinateur

  • fonctionnement sur batterie sans avoir besoin d’alimentation supplémentaire
  • Affichage graphique fournissant facile à comprendre la présentation des résultats des tests
  • tests de réseau complets en mode autonome sans nécessiter un ordinateur portable

Caractéristiques de diagnostic améliorée grâce à complément logiciel PC-Based

  • De nombreuses fonctionnalités supplémentaires pour l’exécution, l’analyse et la gestion des tests de bus en mode PC (Tendance, Topologie Numériser, Master Simulator, Oscilloscope, analyseur Frame)
  • Test rapide et test contrôlé par l’utilisateur pour l’évaluation de l’état du réseau facile à la simple pression d’un bouton
  • Génération de rapports d’essais qui décrivent l’état actuel de l’installation PROFIBUS
  • Idéal pour les utilisateurs moins expérimentés, ainsi que pour les spécialistes de bus de terrain

Adaptateur de mesure en option pour MBP (Manchester Coded Bus Powered) Physique

  • Analyse spécifique du signal de support physique MBP (de feedingvoltage, type de signal, le signal de polarité, divergence bitrate)
  • Analyse complète du protocole directement au niveau du segment PROFIBUS PA

Détails techniques

Diagnostics Functionality
Protocol and Frame Analysis PROFIBUS DP-V0 and DP-V1, automatic baud rate detection in the range of 9.6 kbit/s … 12 Mbit/s
Signal Analysis PROFIBUS DP-V0, DP-V1, FMS and MPI
… via EIA-485 Signal quality index 0 … 5,000, determined from signal wave form as well as signal/noise ratio and rise time; signal sampling with 8/16 samples per bit
… via MBP
(requires optional adapter)		 Fieldbus feeding voltage: 0 V … 35 V at 0.1 V resolution, signal level: 100 mV … 1,200 mV at 10 mV resolution, signal polarity, bitrate divergence: ±1.2 % at 0.01 % resolution, signal sampling with 128 samples per bit
Oscilloscope Display
(Not Available for MBP)		 Test range: ±5 V at 10 mV resolution (differential), 0 V … 15 V at 15 mV resolution (A or B to DGND);
sampling rate: up to 384 Msamples/s; sampled points: 2,400 (signal details), 8,192 (oscilloscope analysis)
Topology Scan
(Not Available for MBP)		 Active, maximum distance: 230 m, accuracy: ±2 m
Cable Test
(Not Available for MBP)		 Active, supported cable segment length: 5 m … 1,500 m, accuracy: 5 %
Operation Via graphical colour display, four function keys and scrollwheel including central push-button or via PC/notebook
Internal Memory Capacity 3 user-definable network directories (segment and test location) for storing quick tests, trend logs and cable test results
Trend logging: max. 99 hours
Trigger IN: L = 0 V .. 0.8 V; H = 2.4 V .. 24 V; pulse > 10 μs, active high
OUT: approximately 5 V, active low (connection to storage oscilloscope)
PC Operating Software PROFIBUS Diagnostics Suite, see separate datasheet for details
Connectors
EIA-485 (PROFIBUS DP) PROFIBUS D-sub connector, 9 pins, power supply for external bus termination
MBP (PROFIBUS PA) Connector, 3 pins, for screw terminals at optinal measuring adapter, measuring cable set including 3 probes(adapter for MBP measurement is attached to D-sub connector)
USB V 2.0, high speed 480 Mbit/s, galvanically isolated
Dimensions (H x W x D) 35 mm x 220 mm x 110 mm
Power Supply Built-in three-cell lithium-ion battery supporting 11.1 VDC or external AC adapter 100 VAC … 240 VAC, 50/60Hz (galvanically isolated)
The rechargeable battery has a runtime of up to 5 hours (runtime depends on the performed test functionality and rate of wear of the rechargeable battery)
Battery is charged via external AC adapter
Operating/Storage Temperature Operating temperature: 0 °C … 50 °C, storage temperature: -20 °C … 70 °C
Relative Humidity Air humidity: 10 % … 90 % without condensation
Weight Test tool, no cable: approximately 0.75 kg; complete carrying case: approximately 4.2 kg
Conformity CE, FCC, VCCI

Téléchargements

Documents

Datasheet : BC-700-PB

Spécifications techniques et caractéristiques électriques du module BC-700-PB.

Télécharger

PG-Diagtool — Téléchargement Logiciel (Accès cloud)

Outil de diagnostic Profibus pour BC-700-PB. Cliquez ci-dessous pour demander le lien de téléchargement via notre cloud sécurisé.

Demander le téléchargement

Numéro de référence

ATV-DDA-NN-006014 PROFIBUS Tester 5 (BC-700-PB)
ATV-DDL-NN-006012 PROFIBUS Tester 5 (BC-700-PB) with Oscilloscope Option
ATV-LRA-NN-006011 Oscilloscope Option (Oscilloscope view in stand-alone mode)
ATV-DDL-NL-006010 PROFIBUS PA option for BC-700-PB (BC-700-PB serial number required for order placement)

Scope of Delivery

Hardware PROFIBUS Tester 5 (BC-700-PB), power supply unit 100 VAC … 240 VAC, 50/60 Hz with connecting cables for Europe and USA, adaptor cables, carrying case
Measuring adapter BC-700-H1, measuring cable set (for PROFIBUS PA option)
Software PROFIBUS Diagnostics Suite (PC software for Windows on CD-ROM)
BC-700-PB upgrade license (on CD-ROM, for PROFIBUS PA option)
Documentation Device Manual, “Getting Started“ Manual

Additional Products and Services

ATV-ACA-NN-006031 EIA-485 D-Sub adapter cable for testing operational networks with reduced influence on segment operation
ATV-ACA-NN-006033
(view product)		 Adapteur D-Sub vers M12, fourni avec un T et bus M12 de terminaison, pour profibus DP
ATV-PB-LSZ-CHB3
(view product)		 Pince pour mesure des courants de fuite. Localise les problèmes électromagnétique ( EMC ) . 40 ..1000 Hz, MIN/MAX, Data Hold, Cable pour mesure, fourni avec son étui.
ATV-BC-PBMB-PB-S
(view product)
 D-Sub Service Interface with Active Bus Termination and 90° Angled Connector for PROFIBUS DP
ATV-BC-M12DP-PB
(view product)
 M12 Service Interface for PROFIBUS DP, Comprising M12 T-Piece, End Cap and M12 Connection Cable (1 m)

Analyse SW

PROFIBUS Diagnostics Suite

Universal Software for All Diagnostic Tools of the bus check Family
PC software for performing, evaluating and managing tests of bus physics, bus communication and cabling in PROFIBUS networks. The application is extremely easy to use, with a quick test available at a click of the mouse.

One Software for All Diagnostic Products

  • Comprehensive analysis of PROFIBUS DP and PROFIBUS PA networks
  • Diagnostic functionality available depending on connected test tool
  • License-free use on any number of PCs – no activation required

Suitable for the Fieldbus Novice

  • Bus test initiated with a single mouse click
  • Clear, easy-to-read display of test results
  • Separate expert mode providing in-depth diagnostic features for network specialists

Functionality for All Diagnostic Tasks

  • Continuous display of current bus status in status bar
  • Overall bus health indicated by traffic light symbols for bus physics and bus communication
  • Detail views with additional diagnostic information, also for advanced analyses by experts
  • Testing of bus and connected devices via integrated master simulator without configuration or parameterization
  • Generation of test reports for acceptance testing of PROFIBUS installations

DIvers

Technical Data

Operating Systems:
PC Hardware*		 RAM 500 MB for Windows XP
1 GB for Windows 7, Windows 8
Processor 1 GHz for recording at baud rates up to 1.5 Mbit/s
2 GHz for recording at baud rates over 1.5 Mbit/s
Screen Resolution 1024 x 768 pixels (XGA)
USB Interface 2.0
Supported Operating Systems Windows XP, Windows 7, Windows 8, Windows 10

* The above minimum requirements are only general guidelines. Requirements may vary depending on the PC/notebook used.

Accessoires

Fieldbus Shield Digital Leakage Current Clamp – Locating EMC Problems

Measures leakage currents, e.g. leakage and fault currents, and current pick-up of instruments without breaking the circuit. Measurements according to DIN VDE 0701/0702 and the German BetrSichV (BGV A3, VBG 4).

  • Reliably Detects Even Very Small Improper Shield Currents Resulting from EMC Problems.

Functionality

  • Leakage current measurement
  • Differential current measurement
  • Voltage and resistance measurement
  • Frequency range for AC current / voltage 40 Hz…1 kHz
  • Acoustical continuity test
  • MIN/MAX and relative value measurement
  • Manual selection of the measurement range
  • Integrated data hold
  • Additional analog bar graph display
  • Clamp opening 30 mm
  • Auto power off

Included in Package

Digital leakage current clamp, 2 batteries 1.5 V IEC LR6, carrying case, measuring cables (1 x red, 1 x black) and user manual.

Order Number

DDA-ZZ-004010

M12 Service Interface for PROFIBUS DP

Application example:

Interface for Providing an Access Point to Test PROFIBUS Networks With M12 Connectors

Provides an access point for testing PROFIBUS networks with M12 connectors.

  • Allows Testing the Bus During Operation

Application

The service interface is inserted between two bus stations. When not in use, the service output of the T piece is closed with an end cap. At baud rates of 1.5 Mbit/s or higher, use the supplied cable to ensure that the required minimum distance between bus stations is maintained.

Included in Package

T piece (protection class IP68) with end cap and a 1 m DP cable fitted with a male/female M12 connector on each end.

Order Number

ATV-ACA-NN-006034

 

ATV-ACA-NN-006034

M12 adaptor PROFIBUS Tester PB-T5

Application example:

Interface for Providing an Access Point to Test PROFIBUS Networks With M12 Connectors

M12 Adaptor for PB-T5

  • Allows Testing the Bus During Operation

Application

The service interface is inserted between two bus stations. When not in use, the service output of the T piece is closed with an end cap. At baud rates of 1.5 Mbit/s or higher, use the supplied cable to ensure that the required minimum distance between bus stations is maintained.

Included in Package

M12 Adaptor for PB-T5

Order Number

ATV-ACA-NN-006033

 

Videos

Comment utiliser le PB-T5

[evp_embed_video url=”/ftp/softing/PB-T5/PROFIBUS Troubleshooting with PROFIBUS Tester 5.mp4″ template=”mediaelement”]

PB-T5 – Logiciel PB-DIAG TOOL

[evp_embed_video url=”/ftp/softing/PB-T5/PB-T5_Network_Acceptance_EN.mp4″ template=”mediaelement”]

Les clients intéressé par ce produit peuvent aussi etre intéressé par :

The post Testeur PROFIBUS DP & PA first appeared on ATEVA Technologies.]]> pnGate DP https://www.atevatech.net/fr/produit/pngate-dp-2/?utm_source=rss&utm_medium=rss&utm_campaign=pngate-dp-2 Mon, 09 Jan 2023 18:28:35 +0000 https://www.atevatech.net/?post_type=product&p=34133

pnGate DP : Passerelle PROFINET pour exclave PROFIBUS

pnGate DP

Cette passerelle vous permet de connecter des esclaves PROFIBUS à un réseau PROFINET. Gardez vos esclaves PROFIBUS fiables et importants. fini les longeurs interminables de cable Profibus, qui causent des problèmes de reflexions. la passerelle, au plus pret résoudra le probleme.

Général

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Supports major PROFINET engineering tools such as TIA Portal, Step7 und PC WORXS
  • Included CommDTM allowing use in FDT/DTM frame applications
  • EDD-based device parametrization using Siemens Simatic PDM

Direct Connectivity to PROFIBUS Segments

  • Single access point to PROFIBUS DP segment from PROFINET networks
  • Acting as PROFINET device and PROFIBUS DP master
  • Support of one PROFIBUS DP segment
  • Support of up to 32 PROFIBUS devices

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFIBUS segments without requiring modification
  • Support of MRP and S2 PROFINET redundancy for increased reliability

Téléchargements

  • Data Sheets

  • Manuals & Documentation

Numéro de référence

GCA-AN-024606 pnGate DP, PROFINET to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).
Additional Products and Services
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-AN-024608 pnGate PB, PROFINET to PROFIBUS gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
GCA-AL-024602 pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-AL-024604 pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).
The post pnGate DP first appeared on ATEVA Technologies.]]> mbGate PB https://www.atevatech.net/fr/produit/mbgate-pb/?utm_source=rss&utm_medium=rss&utm_campaign=mbgate-pb Tue, 01 Jun 2021 17:56:51 +0000 https://www.atevatech.net/?post_type=product&p=29952 Passerelle Modbus TCP /Profibus PB

  • 1 segment Profibus DP
  • 2 segments Profibus PA

Poids: 0.300 kg
HS Code: 85176200

The post mbGate PB first appeared on ATEVA Technologies.]]>

Passerelle : Réseaux Modbus TCP vers des réseaux Profibus PB

Avec la passerelle mbGate PB, nous pouvons désormais intégrer jusqu’à 2 segments PROFIBUS PA et 1 segment PROFIBUS DP à un système de controle Modbus TCP. La passerelle agit comme un serveur Modbus TCP et un maitre PROFIBUS. Avec cette gateway, le cout de l’intégration est considérablement réduit. Elle permet la paramétrisation et l’utilisation des outils standard de management.

Général

Composant clé pour la transition vers une technologie de pointe

  • Remplacement simple des coupleurs de segments PROFIBUS DP/PA installés
  • Réutilisation des segments PROFIBUS existants sans nécessiter de modification

Connectivité directe aux segments PROFIBUS

  • Point d’accès unique aux segments PROFIBUS DP et PROFIBUS PA des réseaux Modbus TCP
  • Agissant en tant que serveur Modbus TCP et maître PROFIBUS PA et PROFIBUS DP
  • Prise en charge d’un segment PROFIBUS DP et jusqu’à deux segments PROFIBUS PA

Configuration, paramétrage et gestion des “Plant asset Managment”  à l’aide d’outils industriels standard

  • Prend en charge les principaux outils d’ingénierie Modbus tels que Schneider Unity Pro ou Siemens TIA Portal
  • CommDTM inclus permettant une utilisation dans les applications de châssis FDT/DTM
  • Paramétrage d’appareils basé sur EDD avec Siemens Simatic PDM

Redondance MODBUS/TCP

  • Prend en charge l’utilisation de deux automates redondants et de deux passerelles redondantes
  • Activation par  licence
  • Contrôle total du mode de fonctionnement redondant via l’ingénierie et l’automate

Téléchargement

 

  • Drivers & Software

    • PACTWare

  • Manuals & Documentation

Référence

Scope of Delivery
Hardware mbGate PB Gateway
Documentation On Website
Order Numbers
GCA-EN-024808 mbGate PB, Modbus TCP to PROFIBUS Gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
Additional Products and Services
LRA-EN-024851 gatePlus HighAvailability, License for activating redundancy features in mbGate PB
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-EL-024802 mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 2 PA segments (up to 32 PA devices).
GCA-EL-024804 mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 4 PA segments (up to 64 PA devices).
GCA-EN-024806 mbGate DP, Modbus TCP to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

Vidéo

Video Channel : Retrouvez nous sur notre page channel YOUTUBE

The post mbGate PB first appeared on ATEVA Technologies.]]>