PROFINET | ATEVA Technologies https://www.atevatech.net Votre partenaire en réseaux industriels Thu, 26 Feb 2026 06:10:43 +0000 fr-FR hourly 1 https://wordpress.org/?v=6.8.2 https://www.atevatech.net/wp-content/uploads/2021/03/cropped-cropped-ATV_logo_web-32x32.png PROFINET | ATEVA Technologies https://www.atevatech.net 32 32 Certificator : NetXpert XG2 https://www.atevatech.net/fr/produit/certificator-netxpert-xg2-2/?utm_source=rss&utm_medium=rss&utm_campaign=certificator-netxpert-xg2-2 Tue, 09 Sep 2025 11:22:47 +0000 https://www.atevatech.net/?post_type=product&p=39957 NetXpert XG jusqu'à 10 Gbit/s
Certificateur de débit Ethernet
Qualificateur réseau/Câblage
Teste toutes les connexions de câbles, affichage graphique avec indication de court-circuits.
Teste réseau PoE, Linkconnectivity, LLDP, Ping et DHCP
Qualification de connectivité IEEE jusqu'à 10 Gbit/s avec la technologie BERT, SNR et Delay Skew (délai de propagation)
Support Cuivre et Fibre - Malette rigide

Poids : 4 Kg -  HS Code : 90318080

The post Certificator : NetXpert XG2 first appeared on ATEVA Technologies.]]>

NetXpert XG2 : Test, verify and certify your Ethernet Network . let Garanty the speed on your cable.

NetXpert: the ultimate solution

The speeds of “Wireless Access points” often exceed the speeds of cabling installed in the network. Is it possible that your cables handle speeds well beyond their specifications? Is it possible that your CAT5e or CAT6 cables can reach speeds of 1GBits/S or even 10Gbits/s?

To find out, a simple function on the NetXpert XG2 allows you to perform 3 tests. Performs a speed test by sending 1Gb/s of data via your cable (BERT Test) and it will prove if it will perform beyond specifications and follow the speed of the installed “Access Points”

The NetXpert is the only cable tester and active network manager to perform Bit Error Rate Test (BERT), Signal to Noise Test (SNR) and Speed Delay of 1Gb/s, 5Gb/ s or 10Gb/s at the touch of a button. You can now perform real-time throughput tests to validate your cables up to 10Gb/s.

Test error rate, noise and propagation delay instantly

By performing a bit error rate test (BERT) and according to IEE802.3an standards, the NetXpert XG certifies you or not, error-free data transmission up to 10Gb/s

One-touch self-test includes Signal-to-Noise Ratio (SNR) and Time Offset, which can have a significant impact on Gigabit transmission

The signal-to-noise ratio verifies that the noise is low enough and the signal is high enough for reliable transmission. “Propagation delay” indicates an offset between wire pairs. Excessive delay can cause serious degradation of transmission and therefore performance.

The 3 basic measurements to determine whether a transmission is reliable or not can be done with just one touch. Once the measurement is done, you can repeat it immediately using this unique function. Each measurement is archived and provided with a final summary report in PDF, CVS or XML format

Dépannage du réseau actif PoE++

Lors de dépannage de réseaux actifs PoE++ , le NetXpert XG offre une série de mesures exhaustives. Cela inclut le test de charge pour vérifier la perte de tension et assurer ainsi une stabilité de l’alimentation PoE, l’identification des appareils connectés au réseau et la détection de la disponibilité d’appareils prioritaires.
Le NetXpert XG offre un espace de stockage interne suffisant pour de gros projets et génère des rapports de test complets conformément aux normes en vigueur. Sa large gamme d’accessoires fait du NetXpert XG l’outil de qualification incontournable – de la localisation individuelle de câble et son générateur de tonalité intégré ou bien ses bouchons d’identifications en passant par la génération de rapports de mesure et le dépannage de réseaux PoE++.

Général

The cable qualifier that is defining a new category — the cable project qualifier

If you are a cable installer, network owner, network builder, or system integrator, you’ll be excited to hear that NetXpert XG includes a project editor and auto test generator for up to 1000 cables, and test reports you can keep for your records or leave with your customer.  Once the tests are created, plug in the cable, click test, and NetXpert XG starts testing the cable to IEEE 802.3 standards to prove the speed of your cable.  Not only do you get a wiremap and cable length, NetXpert XG tests BERT, SNR, Delay Skew, distance to opens, shorts, or miswires.  As a bonus you get active network tests for copper, fiber, and wireless.  And, with 2 NetXpert XG local units, you can test fiber cables.

Cable Project Qualifier

  • Use the project editor, cable test editor, test label editor to pre-configure your cable testing projects
  • Press test to automatically sequence up to 1000 cable tests from the local or remote device to increase cable testing efficiency when working alone
  • Test data cabling for IEEE 802.3 compliance at data rates up to 10 Gb/s (BERT)
  • Determine signal-to-noise ratio (SNR) for compliance up to 10 Gb/s
  • Measure delay skew for compliance up to 10Gb/s
  • Measure length of cable with TDR and capacitance measurements for highly accurate test results and easier troubleshooting
  • Full-color wire map shows distance to open, distance to short, miswires, split pairs, and shield on a color graphical display
  • Save test results and generate standards-based measurement reports providing “Pass/Fail” indication in pdf, csv, or xml format

Perform active network management

  • Support for IPv4 and IPv6
  • Discover your network and see the connected network devices
  • Identifies defective PoE switches with a PoE load test
  • DHCP test
  • Ping lists can be defined and saved for later use
  • LLDP/CDP detection and analysis
  • Identifies VLANs present in your network
  • Data transfer from the tester to the PC using USB stick, wireless, or bluetooth connectivity

Details Techniques

Length Measurement Technology Time-Domain Reflectometry (TDR) and capacitance
Cable Measurements Cable Testing and ID: up to 1,000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft (30 cm))
Distance to fault: 0 to 656 ft (200 m) ± (5% + 3ft (1m))
Supports 8 wiremap remotes (RJ 45) and 24 RJ-45 ID only
remotes
Power over Ethernet (PoE) Test supports IEEE 802.3af PoE (Type 1, max 15.4W),
IEEE 802.3at PoE+ (Type 2, 30W) and 802.3bt PoE++ (Type 3, 60W)
Future proofed for IEEE 802.3bt Type 4 100W higherpower PoE
Active Ethernet Network and test support by interface:
Copper RJ-45 interface –100/1,000/2,500/5,000/10,000 Mb/sec link speeds
Fiber SFP+ #1 interface supports 10Gb/sec link speed
Fiber SFP+ #2 interface supports 1Gb/sec link speed
WiFi 802.11 a/b/g/n 2.4 Ghz WiFi and Bluetooth
Maximum Voltages Maximum voltage that can be applied to any 2 connector pins without causing damage to the tester:
RJ-45: 60 VDC or 50 VAC
Save Test Results Stores virtually unlimited cable or network tests with user defined names per project
Tone Generation Tone Frequencies: 730 Hz and 1440 Hz
Languages English, German, French, Spanish
Battery Li-Ion, 7.2 VDC, 3.1A-hr (typical)
Battery Life at 10Gb: 5 hrs minimum, 24 hrs stand-by
Temperature Operating: 14 to 140° F (-10 to 60°C)
Storage: -22 to 158°F (-30 to 70°)
Humidity 10 to 90% non-condensing
Enclosure Injection molded plastic
Display 7″ Color TFT-LCD capacitive touch display,
1024 x 600 resolution (WSVGA)
Size 245 x 177 x 73 mm (main unit)
130 x 177 x 55 mm (Active Remote)
Weight with Battery 2.6lbs (1.2 kg) main unit
1.3lbs (0.6 kg) Active Remote

Comparaison

 

Features

NetXpert XG
PLUS

NetXpert XG
10G

NetXpert XG
2.5/5G

NetXpert XG
1G

Active network test on Copper

Passive qualification test on Copper

Active network test on Fiber Optic (SM/MM)

Passive qualification test on Fiber Optic (SM/MM)

Maximum speed:

10Gbps

10Gbps

5Gbps

1Gbps

Mainframe unit:

2

1

1

1

Active remote unit:

1

1

1

1

Upgradeable to NetXpert XG – 2.5/5G

Upgradeable to NetXpert XG – 10G

Upgradeable to NetXpert XG – PLUS

Compatible with Fiber Microscope

Compatible with Cable Probe (CP15)

Compatible with ID remote identifiers

Compliant to IEEE 802.3an Standards to support up to 10Gbps

Compliant to 802.3af/at/bt to support PoE/+/++ testing

Compliant to Wi-Fi 802.11a/b/g/n/ac to support Wi-Fi.

Generate graphical PDF reports

The post Certificator : NetXpert XG2 first appeared on ATEVA Technologies.]]> DATAEAGLE 4000 Series – Wireless Profinet https://www.atevatech.net/fr/produit/dataeagle-4000-series-wireless-profinet/?utm_source=rss&utm_medium=rss&utm_campaign=dataeagle-4000-series-wireless-profinet Mon, 15 Jul 2024 15:44:49 +0000 https://www.atevatech.net/?post_type=product&p=37375 Access Wireless pour votre réseau PROFINET

The post DATAEAGLE 4000 Series – Wireless Profinet first appeared on ATEVA Technologies.]]>

DATAEAGLE 4000 Series – WIRELESS PROFINET

dataEAGLE 4000 Series

DATAEAGLE 4000 – Wireless PROFINET

Our DATAEAGLE 4000 product line has been specially developed for the implementation of Wireless PROFINET. With its patented filter technology, this wireless 4000 series ensures an optimal, reliable wireless connection and is versatile in its application. See for yourself!

Overview

Wireless PROFINET – In practice

As a rule, sensor and application data from machines in the field level are transmitted to a control system for use. If this has to be done wirelessly in view of moving parts – e.g. in sewage treatment plants or with cranes – radio connections are used which are aligned with the field bus used in each case: The modules of the DATAEAGLE 4000 series “speak and understand” PROFINET with or without PROFIsafe support. The patented data pre-processing integrated in the module, including a filter function, achieves a particularly high level of system availability.

Wireless solutions from Schildknecht can be replaced 1:1 with existing cables – without any changes to the machine. The exchange can be carried out quickly and easily by a company electrician, extensive adjustments or new certifications are not necessary. With DATAEAGLE, no integration of data transmission into the hardware configuration is necessary. The device description files GSD (PROFIBUS) or GSDML (PROFINET) do not have to be changed and the “cable” configuration can be retained. You still encounter questions during installation? Then the Schildknecht commissioning guarantee will help!

Technical Data

The DATAEAGLE 4000 series was developed especially for the transparent transmission of PROFINET IO by utilization of diverse radio technologies.

Suitable for applications in indoor and outdoor applications. The high degree of protection enables use under extreme conditions.

The use of our patented filter technology guarantees a highly reliable and error-free radio link.
All devices with a PROFINET IO interface can be connected via radio. No device configuration necessary ? Plug&Play.

Safety related devices are supported with the DATAEAGLE 4712 Series through PROFIsafe for PROFINET IO.

The range depends on the radio technology used and the conditions of the surroundings.
Typical parameters include a range of 100m ? 300m (47xx) or 1km ? 3km (431x).

Thousands of applications are already successfully in use.

TECHNICAL DATA – DATAEAGLE COMPACT 4000 Series

PROTOCOL PROFINET
VOLTAGE SUPPLY 24 V DC
CONNECTION VOLTAGE SUPPLY Terminal clamps
POWER CONSUMPTION 150 mA
MOUNTING DIN rail mounting
CONFORMITY CE, FCC
IP RATING IP20
TEMPERATURE RANGE -20…+60 °C
FREQUENCY 2,4 GHz
MAXIMUM NUMBER OF RADIO SLAVES 4
TYPICAL DISTANCE (M) 300
MAXIMUM PROFINET TRANSMISSION RATE 100 MBit/s
INTERFACE PORT RJ 45 /  M12
MAXIMUM NUMBER OF PROFINET DEVICES 6
PROFISAFE Yes
INTEGRATED SWITCH Yes

Downloads

Documents

Présentation : DATAEAGLE 4000 – PROFINET sans fil

Aperçu du produit et caractéristiques principales.

Télécharger

DATAEAGLE 4000 — Accès Cloud

Accès à toute la documentation via notre cloud sécurisé.

Pilotes & Logiciels

Outils de configuration et logiciels.

Demander le téléchargement

Documentation

Fiches techniques, manuels utilisateur et documentation technique.

Demander le téléchargement

Autre

Ressources complémentaires.

Demander le téléchargement

References

  • 100m – 300m (4710-A Series)
  • 1km – 3km (4300-A Series)
  • Supports PROFIsafe
  • Protection Class: IP 65

Misc

Application examples

  • Replacement of conductor lines
  • Replacement of trailing cable / cable chains
  • Replacement of optical coupler
  • Cranes / crane systems
  • Storage systems
  • Transport vehicles
  • Water, sewage and raw materials management
  • Machine construction
  • Lifts / Elevators
  • Automotive industry
The post DATAEAGLE 4000 Series – Wireless Profinet first appeared on ATEVA Technologies.]]> pnGate PB https://www.atevatech.net/fr/produit/pngate-pb-2/?utm_source=rss&utm_medium=rss&utm_campaign=pngate-pb-2 Mon, 15 Apr 2024 06:55:56 +0000 https://www.atevatech.net/?post_type=product&p=36872 PN Gate PB: Intégration directe de segments  PROFIBUS DP et PA vers un système de contrôle PROFINET

The post pnGate PB first appeared on ATEVA Technologies.]]>

Passerelle PROFINET vers PROFIBUS DP/PA ( pnGate PB )

Intégration directe de segments  PROFIBUS DP et PA vers un système de contrôle PROFINET

  • Ré utilisez les “power confitioners” dans un projet de mises à jours de réseaux
  • Pas de segments PROFIBUS DP intermédiaire.
  • Préparez pour l’intégration standard et pour les outils d’Assets Managment.

Général

Élément clé pour la transition vers une technologie de pointe

  • Remplacement aisé du coupleur de segment PROFIBUS DP/PA installé
  • Réutilisation des segments PROFIBUS existants sans modification nécessaire
  • Redondance MRP et S2 PROFINET prise en charge pour une fiabilité accrue

Connectivité directe aux segments PROFIBUS

  • Élément clé pour la transition vers une technologie de pointe
  • Agissant en tant que périphérique PROFINET, PROFIBUS PA et PROFIBUS DP Master
  • Prise en charge d’un segment PROFIBUS DP et jusqu’à deux segments PROFIBUS PA

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Prend en charge les principaux outils d’ingénierie PROFINET tels que TIA Portal, Step7 et PC WORXS
  • CommDTM inclus permettant une utilisation dans les applications de trame FDT/DTM
  • Paramétrage d’appareil basé sur EDD à l’aide de Siemens Simatic PDM

Details techniques

Technical Details
Hardware Processor
Status LEDs (Gateway)Status LEDs (Fieldbus)		 Altera Cyclone V SoC with dual-core ARM Cortex-A9
PWR (power supply), RUN (operation), ERR (error), CFG (configuration and update)
SF (system fault), BF (bus fault)
Interfaces and Connectors Ethernet

PROFIBUS PA

PROFIBUS DP-V0 / V1

 2 * IEEE 802.3 100BASE-TX / 10BASE-T, embedded PROFINET switch for daisy chain topology
Connectors: RJ45
Protocol: PROFINET RT / IRT, Support of PROFINET redundancy protocols
RESTful API interface for device configuration
2 * PROFIBUS PA (MBP) segments,
Bus-powered Medium Attachment Unit (MAU): Fieldbus voltage range: 9 VDC … 32 VDC,
current consumption 10 mA,
Connectors: 3-position screw connection, galvanically isolated
1 Segment with RS485 Physical Layer, Connector: 9-pin Sub-D socket
Physical Properties Dimensions (H x W x D)
Weight
Power SupplyOperating / Storage Temperature
Relative Humidity
Cooling
Coating
Mounting
Protection Class		 100 mm x 35 mm x 115 mm
Approx. 0.25 kg
18 VDC … 32 VDC; SELV/PELV power supply mandatory
Typical input current: 200 mA, maximum input current: 1 A (allowing for in-rush current at switch-on)
No power supply to PROFIBUS PA segments through pnGate PB
-40 °C … +70 °C / -40 °C … +85 °C
(see detailed mounting description in user manual)
10 % … 95 %, non-condensing
Convection, no fan
Conformal coating based on ANSI / ISA-S71.04 G3
DIN rail 35 mm
IP20

Téléchargements

Documents

Software

  • PDM Libraries – for integration into Siemens PDM
  • PROFIDtm  – for usage in FDT frame applications
  • “Search and Configure”  – for changing Gateway IP settings
  • PACTWare v 4.1 – FDT frame applications

References

Scope of Delivery
Hardware pnGate PB Gateway
Software GSDtoGSDML Converter, FDT CommDTM, PACTware, Drivers and Tools
Documentation On CD-ROM
Order Numbers
GCA-AN-024608 pnGate PB, PROFINET to PROFIBUS Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
Additional Products and Services
GCA-AL-024602 pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-AL-024604 pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).
GCA-AL-024605 pnGate PA (for STAHL carrier), PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices). For reversed mounting position on STAHL backplane
GCA-EL-024802 mbGate PA, Modbus/TCP to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-EL-024804 mbGate PA, Modbus/TCP to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).

Video

pnGate : Profinet to Profibus DP/PA

Wiki

A savoir

Sous Firmware v 1.30
  Login : administrator
  Password : FGadmin!1
The post pnGate PB first appeared on ATEVA Technologies.]]> SNi40 https://www.atevatech.net/fr/produit/sni40-2/?utm_source=rss&utm_medium=rss&utm_campaign=sni40-2 Thu, 04 May 2023 14:11:09 +0000 https://www.atevatech.net/?post_type=product&p=35125

HS Code : xxxxxxx
Firewall pour tout système Industriel, répondant aux normes et réglementation Européeenne.
solution de sécurité informatique pour protocoles industriels

The post SNi40 first appeared on ATEVA Technologies.]]>

Solution pour la protection des systèmes industriels

Un produit adapté à vos environnements.
Améliorez votre sécurité grâce à un appareil spécifiquement conçu pour protéger les API (Automates Programmables Industriels).

Renforcez votre cybersécurité globale grâce à une gamme complète d’appareils qui répondent à vos exigences en matière d’OT et de convergence IT/OT (Exemple de protocoles analysé : OPC UA, Réseaux Profinet, Ethernet IP, Modbus TCP, etc..)

  • SNi40

La Sécurité ne doit pas être une option

Une protection sans impact sur la production

Détectez et protégez sans aucun impact sur votre activité industrielle. Ce boîtier de sécurité s’intègre facilement aux environnements industriels, grâce à une procédure simple de mise en service.

Intégrez un produit adapté à vos environnements

La gamme de produits de sécurité réseau est disponible selon vos besoins : dans un format Hardware IT pour la protection du réseau informatique ou dans un format Hardware OT avec le Stormshield SNi40, boîtier conçu spécialement pour la protection des PLC (Programmable Logic Controller).

Une administration unique

Avec la solution globale Stormshield Network Security, vous intégrez un seul produit logiciel pour une administration unique quel que soit le domaine d’activité (OT ou IT).

General

Le Firewall est certifié CSPN (Certification de Sécurité de Premier Niveau) par l’ANSSI et répond donc aux éxigences de la réglementation Français ‘LPM) sur la qualification des équipements de détection et protection des Systèmes d’information d’importace vital (SIIV)

L’inspection de paquet ou DPI (Deep Packet Inspection) sur les protocoles industriels. Très peu de solution de sécurité informatique pour l’industrie le propose pour les protocoles industriels. Cette technologie vous permet de vous assurer de la qualité, l’intégrité et la sécurité des paquets réseaux qui sont transportés sur votre réseau industriel

 

Détails techniques

PERFORMANCE

Type Firewall industriel ou Pare-feu industriel
Certification CSPN
Débit du Firewall en UDP 4.8Gbps
Débit du Firewall en IMIX 2.4Gbps
Débit en IPS Jusqu’à 2.9Gbps
Latence max 10ms
VPN Oui IPSec – AES128/SHA1 : 1,1 Gbps
Nombre de Tunnels simultanés 500
Nombre de tunnels SSL simultanés 75 (via Web)
Nom de tunnels SSL simultanés 100 via client
Nombre de sessions simultanées 500 000
Nombre de nouvelles sessions par seconde 20 000
Interface 10/100/1000
Nombre d’interfaces 5
Nombres d’intefaces SFP de 0 à 2
Port série 1
Ports USB 1 x USB 2.0 et 1 x USB 3.0
DPI Deep Packet Inspection ou Inspection des paquets en profondeur OUI
Protocoles compatibles DPI Modbus, UMAS, S7 200-300-400, EtherNet/IP, CIP, OPC UA, CEI 60870-5-104, OPC (DA/HDA/AE), BACnet/IP et IT
Stockage 32Gb
Journal sur SSD
MTBF 26.6 ans
Montage ou installation Rail-Din
Dimensions 165 x 80 x 145 mm
Poids 1.4 kg
Consommation typique 15.5W
Consommation max 19.5W
Température de fonctionnement -40 °C à +75 °C
Protection IP30
Modèle SNI40

 

Numéro de référence

Réference : Système UTM Industriel : SNi40

The post SNi40 first appeared on ATEVA Technologies.]]> dataFEED OPC Suite https://www.atevatech.net/fr/produit/datafeed-opc-suite/?utm_source=rss&utm_medium=rss&utm_campaign=datafeed-opc-suite Tue, 18 Apr 2023 12:28:43 +0000 https://www.atevatech.net/?post_type=product&p=34733 DataFEED OPC suite est le logiciel idéal pour interfacer vos PLC

  • Accès aux Process et Données de Diagnostic aux contrôleurs tels que : Siemens, Rockwell, B&R, Mitsubishi , grâce au dataFEED OPC Suite
  • Intégration de serveurs OPC dit "Classic" vers des solutions plus modernes comme l'OPC UA “Industrie 4.0“
  • Passerelle MQTT et REST pour l'intégration de données de production vers le cloud IoT et les solutions " Big Data " comme : Microsoft IoT, IBM Watson IoT
  • Logiciel téléchargeable sur notre site dans la section téléchargement
The post dataFEED OPC Suite first appeared on ATEVA Technologies.]]>

Général

Accès simple et indépendant aux données des Controleurs

  • Accès en écriture et lecture des contrôleurs, des marques les plus répandues sur le marché
  • Utilisation sans intervention sur l’application du contrôleur
  • Intégration facile sur des contrôleurs en service ou sur une nouvelle installation.
  • Intégration de composant non OPC UA tel que les contrôleurs Siemens S7 dans une solution OPC UA
  • Gain impressionnant pour l’accès aux fonctions existantes OPC
  • Passerelle permettant la connexion divers controleurs avec des composantes Serveur OPC UA et servuers OPC Classic.

Passerelle vers les solutions Big Data et IoT Clouds

  • Intégration de dispositifs d’automatisation dans les applications cloud IoT à l’aide de la fonctionnalité MQTT Publisher, par ex. dans IBM Bluemix Cloud
  • Sécurité de pointe grâce à la prise en charge SSL/TLS, y compris les certificats

Pas besoin de configuration DCOM

  • Intégration de dispositifs d’automatisation via la fonctionnalité MQTT Publisher et REST Client dans les applications cloud IoT, par ex. IBM Watson Cloud ou Microsoft IoT Connected Factory
  • Intégration facile des données de production dans les solutions de stockage NoSQL Big Data telles que MongoDB
  • Sécurité de pointe grâce à la prise en charge SSL/TLS, y compris les certificats

Configuration facile

  • Interface utilisateur graphique moderne et intuitive pour une configuration rapide de la communication OPC
  • Utilisation de paramètres par défaut pratiques intelligents, d’assistants de configuration et de la prise en charge du glisser-déposer
  • Gain de temps grâce à une configuration efficace et efficiente des systèmes d’automatisation distribués avec de nombreux serveurs OPC UA et OPC Classic

* « Industrie 4.0 » est une initiative du gouvernement allemand visant à mettre en œuvre un « Internet des objets » industriel

Détails techniques

Supported dataFEED Features OPC UA Server and Client, OPC Classic Server and Client, OPC Tunnel, MQTT, MindSphere and REST Connector,
Database Access (SQL/NoSQL), File Access, Data Exchange (in any direction between OPC UA and OPC Classic Servers or controllers), Filter, Optimizer, Concentrator, Bridge, Local Items (in any direction between OPC UA and OPC Classic Clients)
Supported Controllers Siemens SIMATIC S5, SIMATIC S7 (S7-200, S7-300, S7-400, S7-1200, S7-1500, including optimized blocks), LOGO! 8, PAC Counter and Siemens-compatible controllers like VIPA controllers
Rockwell SLC-500, PLC-5, ControlLogix and CompactLogix
Mitsubishi Melsec-Q Series with Ethernet interface card
B&R controllers with Ethernet interface
Modbus TCP-compatible controllers (Wago, Beckhoff, Phoenix, Schneider, etc.)
All controllers and devices with integrated OPC UA Server
Accessible Controller Data Inputs, outputs, data blocks, markers, timers, counters
Supported IoT Devices All devices with integrated MQTT Publisher
Supported OPC Specifications OPC Classic Data Access V1.0a, V2.05, V3.0, OPC Classic XML-DA V1.01,
OPC Alarms & Events V1.10, OPC Unified Architecture V1.02
Supported OPC UAFunctionality Data Access profile

TCP transport protocol using OPC UA binary coding

Security Methods: Basic256SSha256, Basic256

Authentication by user names and passwords including user certificate
Supported OPC Data Types VARIANT Data Types I1, UI1, I2, UI2, I4, UI4, R4, DATE, BSTR, BOOL and arrays (VT_Array) of these data types
Protocols for IoT Cloud Link MQTT Publisher:
MQTT Publisher V3.1.1, V3.1
QoS, Retain, Last Will and Testament
Security SSL/TLS including certificatesMindConnect:
HTTPS
Methoda: POST
Security: SSL including certificates, authentication via Shared Secret or RSAREST Client:
TCP, HTTP, HTTPS
Methods: PUT, POST
Security SSL and user authentification including certificates
Supported Databases NoSQL databases, e.g. MongoDB, CouchDB
ODBC enabled databases, for example, Oracle, MySQL, Microsoft SQL Server, IBM DB2,
other NoSQL- and ODBC-enabled databases upon inquiry
Operation Mode Application (OutProc Server), Windows Service
Logging, Diagnostics Logging of OPC Calls and Notifications, OPC Data, OPC Tunnel frames, text file access, database access, configurable via integrated web server diagnostic interface
Supported Operating Systems Windows 7, Windows 8, Windows 8.1, Windows Embedded 8.1 Industry, Windows 10, Windows 10 IoT Enterprise,
Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012,Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Licensing Runtime license per computer
Demo Version Full dataFEED OPC Suite, time limited to 72 hours – ( Limitation : 10 servers connections / 250 data items )

Téléchargements

Documents

Datasheet: dataFEED OPC Suite (Extended License)

Technical specifications and features of the dataFEED OPC Suite.

Download

Release Notes: dataFEED OPC Suite

Latest changes, fixes and new features.

Download

dataFEED OPC Suite — Cloud Access

Access to software, trial version, manuals and documentation via our secure cloud.

Drivers & Software

dataFEED OPC Suite — Trial (72h) & Full version v5.xx, dataFEED Exporter (Freeware).

Request Download

Documentation

dataFEED OPC Suite user manual (English), complete latest revision.

Request Download

Other

Symbol import tool for Siemens STEP 7 and TIA-Portal projects, additional resources.

Request Download

Références

LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, OPC UA support, access of any number of OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and dataFEED OPC Tunnel Servers plus additional functionality like Database Access, File Access, Data Exchange, Optimizer, Concentrator and Bridge
HUA-DD-130001 USB Hardware Key for dataFEED OPC Suite, Version V4.01 and higher, replacing the standard Software Key

Scope of Delivery

Software dataFEED OPC Suite on CD-ROM
Documentation Manual in PDF format and Online Help in English and German

Additional Products and Services

100-1030-01 Training “OPC Server and Client in Practice”
GAA-DX-145111 dataFEED uaGate SI
GPL-CS-191000 echolink S7-compact

Options

dataFEED OPC UA

dataFEED OPC Server Siemens Serveur OPC Classic ( Option : Serveur OPC UA ) pour accès facile et rapide aux process et données de diagnostiques sur les PLC Siemens : S5, S7-200, S7-300, S7-400, S7-1200 et S7-150 ainsi que les controleurs compatible Siemens
dataFEED OPC Server B&R Serveur OPC Classic ( Option : Serveur OPC UA ) pour l’accès facile et rapide aux process et données de diagnostique sur contrôleurs B&R
dataFEED OPC Server Modbus OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in controllers providing a Modbus TCP interface, e.g. controllers from Wago, Schneider Electric or Phoenix Contact
dataFEED OPC Server Rockwell OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in Rockwell (Allen-Bradley) CLX, SLC and PLC-5 controllers
dataFEED OPC Server Mitsubishi OPC Classic Server (optional: OPC UA Server) for fast and easy access to process and diagnostic data in Mitsubishi Melsec-Q controllers

EXTENDED FUNCTIONALITY

dataFEED OPC Tunnel OPC Tunnel for avoiding DCOM communication problems when using OPC Classic for communication between PCs
dataFEED REST Connector REST connectivity for data integration for IoT cloud solutions, support for OPC Classic and OPC UA (optional)
dataFEED MQTT Connector MQTT Publisher functionality for easy and efficient integration of production environments and its data in IoT (internet of Things) and Industrie 4.0* solutions
dataFEED OPC Organizer UA
 OPC UA support for implementing Industrie 4.0. Allows using OPC UA (UA) for data exchange within an OPC Classic environment
dataFEED OPC Data Handler Data Handler extension for simple data exchange between controllers and OPC Servers as well as for storing process data in databases and files
dataFEED OPC Organizer Classic OPC Classic Client and OPC Classic Server, for extended OPC Classic communication functionality

Wiki

For the use of MySQL database, you would need :

You can test you OPC Classical DA with our testing solution

The post dataFEED OPC Suite first appeared on ATEVA Technologies.]]> pnGate DP https://www.atevatech.net/fr/produit/pngate-dp-2/?utm_source=rss&utm_medium=rss&utm_campaign=pngate-dp-2 Mon, 09 Jan 2023 18:28:35 +0000 https://www.atevatech.net/?post_type=product&p=34133

pnGate DP : Passerelle PROFINET pour exclave PROFIBUS

pnGate DP

Cette passerelle vous permet de connecter des esclaves PROFIBUS à un réseau PROFINET. Gardez vos esclaves PROFIBUS fiables et importants. fini les longeurs interminables de cable Profibus, qui causent des problèmes de reflexions. la passerelle, au plus pret résoudra le probleme.

Général

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Supports major PROFINET engineering tools such as TIA Portal, Step7 und PC WORXS
  • Included CommDTM allowing use in FDT/DTM frame applications
  • EDD-based device parametrization using Siemens Simatic PDM

Direct Connectivity to PROFIBUS Segments

  • Single access point to PROFIBUS DP segment from PROFINET networks
  • Acting as PROFINET device and PROFIBUS DP master
  • Support of one PROFIBUS DP segment
  • Support of up to 32 PROFIBUS devices

Key Component for Transition to State-of-the-Art Technology

  • Re-use of existing PROFIBUS segments without requiring modification
  • Support of MRP and S2 PROFINET redundancy for increased reliability

Téléchargements

  • Data Sheets

  • Manuals & Documentation

Numéro de référence

GCA-AN-024606 pnGate DP, PROFINET to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).
Additional Products and Services
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-AN-024608 pnGate PB, PROFINET to PROFIBUS gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
GCA-AL-024602 pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 2 PROFIBUS PA segments (up to 32 PROFIBUS PA devices).
GCA-AL-024604 pnGate PA, PROFINET to PROFIBUS-PA Gateway. Supports up to 4 PROFIBUS PA segments (up to 64 PROFIBUS PA devices).
The post pnGate DP first appeared on ATEVA Technologies.]]>